• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.10a
• /
• pp.161-168
• /
• 2006

The recent unpredictable weather condition, especially abnormal heavy precipitation which is on the verge of PMF, made implement more rigorous design standard. Following these trends, the idea of additional auxiliary spillway, most of them are tunnel around existing one, is adopted to many sites. Tunnel spillway, having free water table is generally consisted of several compartments such as inlet, transition, inclined, curved and stilling parts. It may has some technical problems to be considered. Among them, the surface deterioration due to cavitation is reported many times in the part of irregularities on lining. Including this kind of problem, several technical considerations for tunnel spillway will be handled in this paper during design procedure.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2011.09a
• /
• pp.90-94
• /
• 2011

Longitudinal shell member that arranged block unit on 3D-curved surface is performed manual working by designer considering spacing of division characteristic, location and twisting at geometrical 3-dimensional form. Shell expansion drawing that drawn by initial design and shell landing work performed by hull production design have overlap of design work in terms of arrangement of shell longitudinal member. In this study, eliminate design overlap on shell member arrangement that is one of ship longitudinal member. Develop shell member optimization and auto arrangement system.

• The Journal of Engineering Geology
• /
• v.16 no.3 s.49
• /
• pp.255-263
• /
• 2006

In an electrical tomographic survey using an inclined borehole with a pole-dipole array, we must consider several factors: a singular point associated with zero potential difference, a spatial discrepancy between electrode and nodal point in a model due to a inclined borehole, and a variation of geometric factors in connection with a irregular topography. Singular points which are represented by the normal distance from current source to the ground surface can be represented by serveral regions due to a irregular topography of ground surface. The method of element division can be applied to the region in which the borehole is curved, inclined or the distance between the electrodes is shorter than that of nodal points, because the coordinate of each electrode cannot be assigned directly to the nodal point if several electrodes are in an element. Test on a three-dimensional (3-D) synthetic model produces good images of conductive target and shoves stable convergence.

• Research in Plant Disease
• /
• v.13 no.2
• /
• pp.126-129
• /
• 2007

Sooty leaf blight disease of Cymbium spp. was observed on orchid fields located at Gyeonggi-do in 2005-2006. Symptoms of the disease appeared on leaves and leaf spots were circular to nearly-circular, these circular blemished were yellow, with greater amounts of brown to black flecks forming as the spots enlarge. Severely infected leaves were dry and defoliated. These symptoms were realized wrongly as symptoms by virus. But Pseudocercospora cymbidiicola were isolated from the diseased plants. Conidiophores were produced on the lesion surface of the leaf with the blemished areas andconidia formed dark brown, cylindrical and straight to slightly curved, 5-9 septate, $23.7-85.0\;{\times}\;2.0-3.4\;{\mu}m$. Mycelial growth was mostly slow on potato dextrose agar and the optimum temperature for growth was $25^{\circ}C$. We were identified as Pseudocercoepora cymbidiicola based on the morphological characteristics.

• Journal of the Korean Electrochemical Society
• /
• v.2 no.4
• /
• pp.202-208
• /
• 1999

Composite cathodes of $50/50\;vol\%$ LSM-YSZ $(La_{-x}Sr_xMnO_3-yttria\;stabilized\;zirconia)$ were deposited onto dense YSZ electrolytes by colloidal deposition technique. The cathode characteristics were then examined by scanning electron microscopy (SEM) and studied by ac-impedance spectroscopy (IS). The conditioning effects on LSM-YSZ cathodes were seen and remedies for these effects were noted in order to improve the performance of a solid oxide fuel cell (SOFC). The effects of temperature on impedance, surface contamination on cathode bonding to YSZ electrolyte, changing Pt paste, aerosol spray technique applied to curved surface on microstructure and cell to cell variability were solved by testing at $900^{\circ}C$, sanding the YSZ surface, using only one batch of Pt paste, using flat YSZ plates and using consistent procedures and techniques, respectively. And then, reproducible impedance spectra were confirmed by using the improved cell and the typical spectra measured for an (air)LSM-YSZ/YSZ/LSM-YSZ(air) cell at $900^{\circ}C$ were composed of two depressed arcs. Impedance characteristics of the LSM-YSZ cathodes were also affected by experimental conditions such as catalytic interlayer, composite cathode compositions and applied current.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2006.06a
• /
• pp.213-219
• /
• 2006

The Yongjang mine is located in Masan City, Gyeongsangnamdo, which consists of a black shale possessing quartzite veins with othercompositions such as gold, silver, and sublimated sulfur. The average width of the veins is $9{\sim}17cm$ and the average degrees of the gold and silver are 3.6 g/t and 113.6 g/t respectively. A regional and a detailed scale electrical resistivity surveys are conducted to determine the existence of the mineralization zones and the linear structures in the study area. In addition, surveys of a several different array methods are conducted such as dipole-dipole array in the surface and borehole-to-surface array, surface-to-borehole array, and dipole-dipole array in the borehole. The method of element division can be applied to the region in which the borehole is curved, inclined or the distance between the electrodes is shorter than that of nodal points, because the coordinate of each electrode cannot be assigned directly to the nodal point if several electrodes are in an element. Yongjang vein is extended longer under the subsurface than on the surface in the images reconstructed from the 3D inversion. Therefore, it is recognized that the 3-D interpretation of the electrical resistivity survey is a very useful method to figure out the existence of strike and extension direction because the mineralization zones and the linear structures are shown in each depth.

• Korean Journal of Plant Resources
• /
• v.37 no.1
• /
• pp.22-34
• /
• 2024

Recently, in several regions of Korea, we discovered the occurrence of Sagina micropetala Rauschert and S. procumbens L. All the plants of the genus Sagina growing in Korea are 5-merous and belong to the sect. Spergella. However, the two taxa we discovered belong to the sect. Saginella and are 4-merous. In addition, morphological characteristics such as sepals during the fruiting season and seeds were significantly different from those of species of the genus Sagina that occur in Korea. To clearly identify these species, we compared and observed their primary morphological characteristics using illustrated books and literature. Morphologically, S. micropetala exhibits the following traits: pubescence along the leaf margin, horizontally spreading sepals with red margins, and convex protrusions on the seed surface. In contrast, S. procumbens can be distinguished by its pedicels, which are curved during the flowering season and erect during the fruiting season. This plant also has broadly ovate sepals with white or yellowish-green margins, and flat seed surface protrusions. In terms of molecular analyses, 19 samples of Sagina were divided into two clades (S. micropetala and S. procumbens), confirming the taxonomic identity of the Sagina spp.

• International Journal of Korean Welding Society
• /
• v.1 no.1
• /
• pp.58-62
• /
• 2001

The surface of AC8A Ah alloy was modified by adding the Cu powder using a Plasma Transferred Arc (PTA) welding process. Under the optimum fabricating conditions, the modified surface of AC8A Ah alloy was observed to possess the sound microstructure with a minimum porosity. Hardness and wear resistance properties of the as-fabricated alloy were compared with those of the 76 heat-treated one. In case of the as-fabricated alloy, the hardness of the modified layer was twice that of the matrix region. Although significant increase in the hardness of the matrix region was observed after T6 heat treatment, the hardness of the modified layer was not observed to change. The wear resistance of the modified layer was significantly increased compared to that of the matrix region. The microstructure of a weld zone and the matrix region were investigated using the optical microscope, scanning electron microscope (SEM), electron probe microanalysis (EPMA), and transmission electron microscope (TEM). The primary and eutectic silicon in the weld zone were finer and more curved than in the matrix region, while some precipitates has had been found therein. According to the TEM observation, the predominant precipitate present in the weld zone was the $\theta$'phase, which is precipitated during cooling by rapid solidification in PTA welding process. Improvement of hardness and wear properties in the weld zone in the as-fabricated condition can be explained based on the presence of $\theta$’precipitates and fine primary and eutectic silicon distribution.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.1
• /
• pp.83-91
• /
• 2019

In this paper, we have effectively used the surface characteristics and local similarity existing in image, solved the problem that there is no CZP(Closest Zero point) that occurs in a very few images to hide secrete data into cover image by using histogram shift. By applying the proposed technique, it is possible to hide secrete data invisibly into the cover image, extract secrete data from the stego-image with no data loss, and completely restore the original cover image. It is impossible to know whether the secrete data is hidden in the stego-image because the stego-image constructed by applying the proposed technique has a good visual quality that can not distinguish the difference from the cover image. The proposed method is able to hide secrete data at various levels compared to conventional APD(Adjacent Pixel Difference) technique, and hide secrete data up to 25.1% more than APD in cover image.

• Journal of the Korea Convergence Society
• /
• v.9 no.7
• /
• pp.193-198
• /
• 2018

Applying VR technology to animation areas is emerging as a trend of recent years. So if you use this VR technology in traditional ink animation, 2D art piece is expected to be equipped with a new narrative style and visual and auditory language, making it a new animation genre. There's a lot of technical difficulties in putting the existing 2D ink image on a 360 degree display. VR ink animation has been created that gives depth to VR space by using layer extraction method based on depth of distance and placing layers extracted on curved surface that is aligned with depth in 360-degree space in the image of ink painting, which is the background of traditional ink animation. In the text, we took an overview on problems generated in extracting layers of distant view, close-range view and middle distant view from the existing image of ink painting and made suggestions of an effective way to approach them.