• Analytical Science and Technology
• /
• v.6 no.3
• /
• pp.289-296
• /
• 1993

The formation of Mo(VI)-alizarin red S chelate ion and its extraction into an organic solvent by ion-pairing were studied for the separative determination of trace Mo(VI) in natural water samples. Natural water 100mL was sampled in 250mL separatory funnel. After Mo(VI)-ARS chelate ion was formed by adding 0.01M alizarin red S solution 0.5mL to the water sample of pH 4.0, 0.2% aliquat-336 chloroform solution 10mL was added and the solution was vigorously shaked for about 30 seconds to from the ion-pair between Mo(VI)-ARS and aliquat-336, completely. The solution was stood for about 90 minutes. And the organic phase was taken for the absorbance measurement of the ion-pair at 520 nm. The content of Mo(VI) in sample was obtained from the standard calibration curve. Several extraction conditions such as pH, adding amounts of alizarin red S and aliquat-336, and shaking and standing times were optimized. This procedure was applied to the analysis of river and tap waters. It could be confirmed from the recoveries of over 99% in samples spiked with a given amount of Mo(VI) that this method was quantitiative in the determination of trace Mo(VI) in a natural water.

• Parasites, Hosts and Diseases
• /
• v.21 no.2
• /
• pp.135-141
• /
• 1983

The epidemiological relationship between the current prevalence and monthly reinfection rate of Ascaris lumbricoides was observed in rural communities in Korea by means of blanket mass chemotherapy and worm collection for measurement of the prevalence and reinfection rates. During the period from 1975 to 1980, a total of 4,466 inhabitants in 10 different localities were treated with 10 mg/kg of pyrantel pamoate and 2 days' whole stools were collected from 2,547 inhabitants. The stools were examined for the presence of expelled adult and/or young worms, which represent the prevalence and reinfection rates for past 2 months respectively. After then, the obtained rates were correlated each other applying the timeprevalence curve proposed by Hayashi. It was observed that the prevalence (overall worm positive rate) and worm burden per individual ranged by areas from 13. 6 to 72. 3% and 1.4~10. 2 respectively. The calculated monthly reinfection rates (X) (from young worm positive rates) according to areas were in the range, 2.6~16.2%, and clearly correlated with the current prevalence (Y) under the equation, $Y=1-(l-X)^{7.2}$ where 7.2 is time in month. The equation means that after one time mass chemotherapy the period needed to attain equilibrium of prevalence again would be about 7~8 months. And it is inferred that the majority of reinfected worms in human host turn over every 7~8 months.

• Journal of Korea Water Resources Association
• /
• v.30 no.6
• /
• pp.671-678
• /
• 1997

Water surface velocity meters with microwave were applied to stream discharge measurements and its practical aspects were evaluted. The rating of the surface velocity meters was performed through a carriage and a water tank for the ship model test. It gave5.5% or less errors of average measured velocities under the vertical tilt ang1e of 20$^{\circ}$, 35$^{\circ}$, or 45$^{\circ}$ . A surface velocity meter was used to measure flood velocities at Yoju bridge from 8:00 a.m. to 10:00 a.m. on August 26, 1995. The results showed that surface velocities ranged from 2 to 4 m/s. With the measured surface velocities multiplied by 0.85, the discharge was computed as 10,500 m$^3$/s. It differed $\pm$2% or less from the value of a stage-discharge curve and that of an unsteady flow simulation. Although the measured data are used sparsely per 40 or 60 meters, the computed discharges do not give large variation. Stream discharge measurements were also performed under the normal condition without floods. With the known values of Taechong Dam releases. the depth averaging factors of velocity were calculated by 0.83~0.87. Although there are errors from wind action and inherent ones in the velocity meters, the research showed that surface velocity meters could be an simple and practical alternative for flood discharge measurements.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1526-1526
• /
• 2001

To improve the accuracy of sweetness sensor in automated sorting operations, it is necessary to clarify unevenness of the sugar content distribution within fruits. And it is expected that the technique to evaluate the content distribution in fruits contribute to the development of the near-infrared (NIR) imaging spectroscopy. Sugiyama (1999) had succeeded to visualize the distribution of the sugar content on the surface of a half-cut green fresh melon. However, this method cannot be applied to red flesh melons because it depends on information of the absorption band of chlorophyll (676 nm), which is affected by the color of the fresh. The objective of this study was to develop the universal visualization method depends on the absorption band of sugar, which can be applied to various kinds of melons and other fruits. The relationship between the sugar contents and absorption spectra of both green and red fresh melons were investigated by using a NIR spectrometer to determine the absorption band of sugar. The combination of 2$\^$nd/ derivative absorbances at 902 nm and 874 nm was highly correlated with the sugar contents. The wavelength of 902 nm is attributed to the absorption band of sugar. A cooled charge-coupled device (CCD) imaging camera which has 16 bit (65536 steps) A/D resolution was equipped with rotating band-pass filter wheel and used to capture the spectral absorption images of the flesh of a vertically half-cut red fresh melon. The advantage of the high A/D resolution in this research is that each pixel of the CCD is expected to function as a detector of the NIR spectrometer for quantitative analysis. Images at 846 nm, 874 nm, 902 nm and 930 nm were acquired using this CCD camera. Then the 2$\^$nd/ derivative absorbances at 902 nm and 874 nm at each pixel were calculated using these four images. On the other hand, parts of the same melon were extracted for capturing the images and squeezed for the measurement of sugar content. Then the calibration curve between the combination of 2$\^$nd/ derivative absorbances at 902 nm and 874 nm and sugar content was developed. The calibration method based on NIR spectroscopy techniques was applied to each pixel of the images to convert the 2$\^$nd/ derivative absorbances into the Brix sugar content. Mapping the sugar content value of each pixel with linear color scale, the distribution of the sugar content was visualized. As a result of the visualization, it was quantitatively confirmed that the Brix sugar contents are low at the near of the skin and become higher towards the seeds. This result suggests that the visualization technique by the NIR imaging spectroscopy could become a new useful method fer quality evaluation of melons.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.33 no.5
• /
• pp.453-461
• /
• 2015

In order to manage the deflection of a curved PCT girder bridge during construction, a GPS receiver was installed at the spot predicted to be the weak point during the incremental launching so as to measure the deflection at each construction stage. The deflections obtained in the experiment were compared with those derived from the monitoring of stress, temperature and inclination. The comparative analysis of the GPS measurement and analytical values obtained from finite element modeling with respect to the launching distance showed that the measured values differ by 0.6 to 1.6 times to the analytical results. This difference could be significantly reduced by thermal calibration. From the analysis of the behavioral pattern of the bridge, deflection occurred during construction in the concrete tip due to the deflection at the head of the nose at the 95m and 75m-spots, and compression and tension developed respectively at the compression weak zone and tension weak zone. The application of GPS appeared to enable more efficient management of the deflection during the erection of the curved PCT girder bridge and is expected to be helpful for the prediction and management of the behavior in future ILM construction sites.

• Clinical and Experimental Pediatrics
• /
• v.52 no.9
• /
• pp.999-1004
• /
• 2009

Purpose : Glomerular filtration rate (GFR) is a fundamental parameter in assessing renal function and predicting the progression of chronic renal disease. Because the use of serum creatinine has several disadvantages, many studies have investigated the use of cystatin C for estimating GFR. We compared creatinine clearance and GFR with formulas using serum creatinine and cystatin C. Methods : We retrospectively analyzed 211 patients with various renal diseases and classified them into two groups according to creatinine clearance (Group 1: CrCl >$90mL/min/1.73m^2$, Group 2: CrCl <$90mL/min/1.73m^2$). We measured serum creatinine, cystatin C, and creatinine clearance. We calculated GFR using the Schwartz, Counahan, Filler and Lepage, Bokencamp et al, and Grubb et al formulas. Results : GFR determined by the Schwartz formula had the highest correlation to creatinine clearance (r=0.415, P=0.00). GFR determined by various formulas using cystatin C had lower correlation to creatinine clearance (r=0.187, r=0.187, r=0.291). The Schwartz and Counahan formulas showed greater diagnostic accuracy in detecting decreased GFR than cystatin C in group 2 (areas under the curve: Schwartz, 0.596; Counahan, 0.572; Filler, 0.512; Bokencamp, 0.508; and Grubb, 0.514). Conclusion : GFR determined by the Schwartz and Counahan formulas using serum creatinine showed higher correlation coefficient than that determined by formulas using cystatin C. The formulas using cystatin C were not superior to those using serum creatinine in detecting decreased GFR. Cystatin C measurement was not satisfactory for assessing GFR in patients whose renal function was not severely decreased.

• Analytical Science and Technology
• /
• v.28 no.5
• /
• pp.309-316
• /
• 2015

The analytical method of lead in plasma by ICP-MS was validated after securing environment within class 1,000 classification. We tested specificity and accuracy of within-run and between-run. According to measurement of the amount of suspended particulates in a clean room, 0.3~62 particles were detected in 0.3 µm size while 0.0~28.3 particles were observed in 0.5 µm size. Total suspended particulates met required environment with up to 90.3 particles. The MDL (Method detection limit) of the sample which has been fabricated using fetal bovine serum (FBS) blank was 1.77 ng/L, and LOQ (Limit of quantification) was 5.55 ng/L. The slope, intercept and correlation coefficient of the calibration curve were y=1.09×10⁻³x+4.88×10⁻² and r=0.9999, which showed good correlation. The specificity, within-run and between-run accuracy satisfied the standard at more than 50 ng/L. The average lead concentration in plasma of the general people, current workers and retired workers was 55.4 ng/L, 440 ng/L, and 132 ng/L.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.16 no.1
• /
• pp.51-61
• /
• 2014

It is necessary to perform a dynamic analysis to numerically evaluate the effect of blasting on nearby facilities. The blast load time history, which cannot be directly measured, is most often determined from empirical equation. The load has to be adjusted to account for various factors influencing the load and the frequency, but there is not a clear guideline on how to adjust the load. In this study, a series of 2D dynamic numerical analyses that simulates a closely monitored test blasting is performed, from which the blast load that matches the measured vibrations are derived. In the analyses, it is assumed that the hole generated by the blasting is in the form of a circle, and the load was applied normally to the wall of the opening. Special attention was given in selecting the damping ratio for the ground, since it has important influence on the wave propagation and attenuation characteristics of the blast induce waves. The damping ratio was selected such that it matches favorably with the attenuation curve of the measurement. The analyses demonstrate that the empirical blast load widely used in practice highly overstimates the vibration since it does not account for the energy loss due to rock fragmentation. If the empirical load is used without proper adjustment, the numerical analysis may seriously overstimate the predicted vibration, and thus has to be reduced in the analysis.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.6
• /
• pp.3442-3447
• /
• 2014

A simple method to evaluate the hygroscopic characteristics of polymer of microelectronic plastic package is suggested. To evaluate the characteristics, specimens were prepared, and the internally absorbed moisture masses were measured as a function of the absorbing time and calculated numerically. The hygroscopic pressure ratio was calculated by heat transfer analysis supported by commercial FEM code because the hygroscopic diffusion equation has the same form as the heat transfer equation. The moisture masses were then summed by the self developed code. The nonconductive polymers had quite different characteristics for the different lots, even though they were the same products. The absorbed moisture mass variations were calculated for several different characteristics, and the optimal curve of the mass variation close to experimental data was selected, whose solubility and diffusivity were affected by the hygroscopic characteristics of the material. The method can be useful in the industrial fields to quickly characterize the polymer material of the semiconductor package because the fast correspondence is normally required in industry. The weight changes in the aluminum-nonconductive-polymer joint due to moisture absorption were measured. The deformed system was also measured using the Moire Interferometry system and compared with the results of finite element analysis.

• Journal of Korean Neurosurgical Society
• /
• v.29 no.1
• /
• pp.78-86
• /
• 2000

Objective : Lumbar spinal instability occurs when normal biomechanics support in lumbar vertebrae interrupted. Despite the recent enthusiastic studies, the precise radiological assessment has not been fully established, yet. Therefore, we carefully studied our cases to analyze the radiologic findings in lumbar spinal instability. Patients and Methods : We have put together radiological analysis and assessment based on 38 patients who have been diagnosed and treated for lumbar spinal instabilities from June 1994 to December 1998, Patients who have been diagnosed and treated for trauma were excluded from study. Results : The outcomes are as follows : 1) Lumbar lordotic curve was statistically significant in unstable group by 23.7, compared to the control group ($17.0^{\circ}$). 2) According to the resting x-ray, sagittal plane angulation measured on unstable group was $21.1^{\circ}$, control group $18.0^{\circ}$. Therefore unstable group was noticeably higher(p<0.01). 3) According to the resting x-ray sagittal plane displacement, unstable group had 4.3mm, the comparison had 1.2mm. Therefore measurement from the unstable group were significantly higher(p<0.01). 4) According to stress view, sagittal plane translation was 4.1mm for the unstables and 2.7mm for the comparisons. Therefore unstables were noticeably higher(p<0.01). 5) According to stress view, sagittal plane rotation was $15.1^{\circ}$ at L3-4, $22.0^{\circ}$ at L4-5, $27.9^{\circ}$ at L5S1 for the unstable group and $11.3^{\circ}$, $18.1^{\circ}$, $21.0^{\circ}$ each for the comparison. 6) Facet angle for unstable group, left $29.3^{\circ}-61.5^{\circ}$, right $24.4^{\circ}-63.2^{\circ}$ and the mean for each are $43.1^{\circ}$, $47.2^{\circ}$. The difference between left and right facet angle was $3.5^{\circ}-20.7^{\circ}$ and the mean value $15.3^{\circ}$. Facet angle for the comparisons for the left was $29.3^{\circ}-59.5^{\circ}$, right was in between $25.7^{\circ}-64.5^{\circ}$ range and the each mean are $44.9^{\circ}$ and $47.6^{\circ}$. Also, the difference between left and right facet angle was $4.1^{\circ}-9.3^{\circ}$ and the average was $17.1^{\circ}$. The average and the difference between the left and right angle are found not to have statistic necessity for both unstable and stable measurements(p>0.01). 7) 19 patients were found to have vacuum facet phenomenon among unstable group etc. results were collected. Conclusion : According to above results, we attempted to prepare the application to the patient of radiological analysis and assessment for lumbar spinal instability early checkup.