• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.806-809
• /
• 2003

In this paper, extracting design information from arbitrary aspherical lens shape in reverse engineering is introduced. Deformation terms and sphere data equation with various variables compose asphere equation. Aspherical lens shape is expressed with complicated polynomial expression that includes deformation terms and sphere data. Deformation term and vertex curvature have direct influence on a geometric shape and an optical characteristics of aspherical lens. Hence, extracting these information mean that design information could be derived and analyzed from shape data of arbitrary aspherical lens. Furthermore, sharing designer's experience and knowledge for aspherical lens design could be expected.

• 대한의용생체공학회:의공학회지
• /
• 제26권6호
• /
• pp.365-372
• /
• 2005

Topology optimization method has a great advantage and capability over a conventional shape optimization technique because it optimizes a topology as well as a shape and size of structure. The purpose of the present study, using topology optimization method with an objective function of minimum compliance as a mechanism of bone remodeling, is to examine which shape factors of femur is strongly related with the curvature of femoral shaft. As is expected, the optimized curvature increased definitely with neck angle among the shape factors and showed a similar trend with the measured curvature to neck angle. Therefore, the topology optimization method can be successfully applied in the analysis of bone remodeling phenomenon in the subsequent studies.

• 대한수학회보
• /
• 제31권2호
• /
• pp.215-236
• /
• 1994

The purpose of the present paper is to study generic submanifolds of a Sasakian space form with nonvanishing parallel mean curvature vector field such that the shape operator in the direction of the mean curvature vector field commutes with the structure tensor field induced on the submanifold. In .cint. 1 we state general formulas on generic submanifolds of a Sasakian manifold, especially those of a Sasakian space form. .cint.2 is devoted to the study a generic submanifold of a Sasakian manifold, which is not tangent to the structure vector. In .cint.3 we investigate generic submanifolds, not tangent to the structure vector, of a Sasakian space form with nonvanishing parallel mean curvature vactor field. In .cint.4 we discuss generic submanifolds tangent to the structure vector of a Sasakian space form and compute the restricted Laplacian for the shape operator in the direction of the mean curvature vector field. As a applications of these, in the last .cint.5 we prove our main results.

• 터널과지하공간
• /
• 제6권1호
• /
• pp.10-18
• /
• 1996

Arched openings are generally excavated in underground construction works. Since stress distribution around openings depends on geological structure in rock mass, any shape of arched openings fully conformed with in-situ stress condition should be recommended to maintain mechanical safety of structures. Shape of arched openings is specified by both roof curvature and height-width ratio, and especially this report presents deformation behaviors related with roof curvature. Scale model tests and numerical studies of various shaped openings are conducted, where rectangular opening shows the greatest convergence. Through the anlayses of various arched opengings, as radius of roof curvature is increased, roof lowering and sidewall closure are remarkably increased, whereas floor heaving is increased little by little. By the way, it is useful that displacements of openings are roughly estimated in the stage of preliminary investigation. To find out elastic displacements of arched openings with any roof curvature, regressional formula and charts by least square method are represented. In addition elastoplastic deformation behavoirs of arched openings concerning associated adn non-associated flow rule are discussed.

• 로봇학회논문지
• /
• 제17권1호
• /
• pp.68-75
• /
• 2022

In this paper, we considered the deformation shape of the soft rotation actuator as a double curvature shell and proceeded with the analytical development. Since the response of the hyperelastic material has a large nonlinear deformation, the analytical approach is very complicated and the solution cannot be easily obtained. it is assumed that the behavior of the flexible body, which is a superelastic material, takes the form of a double curvature shell, and the formulas for calculating the deformation are simplified. In this process, equilibrium equations in the related coordinate system representing a double curvature shell were derived. In addition, assuming a thin shell, the stress component in the thickness direction was ignored, and the equation was developed by adding the assumption of free rotation without load. In order to verify the analytically calculated value in this way, an experiment was conducted and the results were compared.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.295-298
• /
• 2000

In this research, a novel sampling strategy for a CMM to inspect freeform surfaces is proposed. Unlike primitive surfaces, it is not easy to determine the number of sampling points and their locations for inspecting freeform surfaces. Since a CMM operates with slower speed in measurement than optical measuring devices, it is important to optimize the number and the locations of sampling points in the inspection process. When a complete inspection of a surface is required, it becomes more critical. Among various factors to cause shape errors of a final product, curvature characteristic is essential due to its effect such as stair-step errors in rapid prototyping and interpolation errors in NC tool paths generation. Shape errors are defined in terms of the average and standard deviation of differences between an original model and a produced part. Proposed algorithms determine the locations of sampling points by analyzing curvature distribution of a given surface. Based on the curvature distribution, a surface area is divided into several sub-areas. In each sub-area, sampling points are located as further as possible. The optimal number of sub-areas. In each sub-area, sampling points are located as further as possible. The optimal number os sub-areas is determined by estimating the average of curvatures. Finally, the proposed method is applied to several surfaces that have shape errors for verification.

• 한국정보과학회논문지:데이타베이스
• /
• 제32권5호
• /
• pp.498-508
• /
• 2005

모양 데이타는 이미지가 나타내는 의미를 가장 잘 반영하는 데이타로서 이미지 검색에 중요한 정보로 사용된다 특히 구조적으로 표현된 모양 특징은 모양이 갖는 기초적 특성과 그들간의 관계 정보를 잘 나타내므로 폭넓게 연구되고 있다. 그러나 대개의 구조적 모양 특징들은 그래프나 트리와 같은 구조로 표현되므로 모양 데이타 검색에서 효율적인 검색 시간을 보장할 수 없는 문제를 지니고 있다. 이러한 문제를 해결하기 위하여 본 논문에서는 모양의 윤곽선 정보를 기반으로한 굴곡 기반 형태 그래프를 생성하고 이를 일반화한 구조로부터 모양을 클러스터링할 수 있는 키를 설계한다. 제안한 굴곡 기반 형태 그래프는 모양이 가지고 있는 윤곽선 특성과 영역의 형태적 특성을 모두 가지고 있다. 모양 검색은 단계적으로 이루어진다. 클러스터링을 통해 검색 공간을 축소하고 외부 굴곡 특징을 이용한 굴곡의 패턴 매칭을 통해 종합적인 유사도가 결정된다. 다양한 실험을 통해 굴곡 기반 형태 그래프와 클러스터링을 통해 검색 공간과 비용이 줄어드는 것을 보여준다.

• Structural Engineering and Mechanics
• /
• 제53권4호
• /
• pp.725-744
• /
• 2015

In this paper, a new damage indicator based on mode shape data is introduced to identify damage in beam structures. In order to construct the indicator proposed, the mode shape, mode shape slope and mode shape curvature of a beam before and after damage are utilized. Mode shape data of the beam are first obtained here using a finite element modeling and then the slope and curvature of mode shape are evaluated via the central finite difference method. In order to assess the robustness of the proposed indicator, two test examples including a simply supported beam and a two-span beam are considered. Numerical results demonstrate that using the proposed indicator, the location of single and multiple damage cases having different characteristics can be accurately determined. Moreover, the indicator shows a better performance when compared with a well-known indicator found in the literature.

• 한국정보처리학회논문지
• /
• 제6권3호
• /
• pp.758-765
• /
• 1999

Shape-preserving property is the important method that controls the complex free form curve/surface. Interpolation method for the existed Shape-Preservation had problems that it has needed the minimization of a curvature-related functions for calculating single-valued data. Solving this problem, in this paper, it proposed to the algorithm of generalizing C piecewise parametric cubic that has shape-preserving property for both Single-value data and Multivalue data. When there are the arbitrary tangents and two data, including shape-preserving property, this proposed method gets piecewise parametric cubic polynomial by checking the relation between the shape-preserving property and then calculates efficiently the control points using that. Also, it controls the initial shape using curvature distribution on curve segments.

• 한국통신학회논문지
• /
• 제17권2호
• /
• pp.187-195
• /
• 1992

본 논문에서는 입력으로 들어온 레이지 데이터에서 표면곡률을 계산하여 물체의 형상정보를 추출하는데 있어서 형상을 분류하기 위해 필요한 임계값을 선정하는 방법을 제안하고자 한다. 이는 우선 입력으로 들어온 레인지 데이타에서 평균곡률과 가우스곡률 등과 같은 표면곡률을 계산한다. 그 후 계산된 표면곡률값의 범위에 따라 물체의 형상특징을 분류하게 되는데 이때 임계값을 잘못 선정하게 되면 물체의 형상을 잘못 분류하게 되어 물체를 오인식하게 되는 문제점을 야기하게 된다. 따라서 본 논문에서는 통계적인 관점에서 표면이 평면인 경우 평균곡률과 가우스곡률이 동시에 0으로 간주될 수 있는 신뢰영역을 도출할 수 있는 방법을 제안하고자 하며, 경험적으로 정한 임계값과 본 논문에서 제안한 임계값으로 선정한 결과를 비교함으로써 본 논문의 유용성을 입증하고자 한다.