• 대한전자공학회논문지SD
• /
• 제43권3호
• /
• pp.21-32
• /
• 2006

본 논문에서는 누설전력 소비뿐만 아니라 스위칭 전력 소비를 동시에 줄일 수 있는 새로운 저전력 SRAM 회로를 제안한다. 제안된 저전력 SRAM은 대기모드와 쓰기동작에서는 셀의 소스라인 전압을 $V_{SSH}$로 증가시키고 읽기동작에서만 소스라인 전압을 다시 $V_{SS}$가 되도록 동적으로 조절한다. SRAM 셀의 소스라인 전압을 동적으로 조절하면 reverse body-bias 효과, DIBL 효과, 음의 $V_{GS}$ 효과를 이용하여 셀 어레이의 누설전류를 1/100 까지 감소시킬 수 있다. 또한 누설전류를 억제하기 위해 사용된 소스라인 드라이버를 이용하여 SRAM의 쓰기동작에서 비트라인 전압의 스윙 폭을 $V_{DD}-to-V_{SSH}$로 감소시킴으로써 SRAM의 write power를 대폭 감소시킬 수 있고 쓰기동작 중에 있는 셀들의 누설 전류 소비도 동시에 줄일 수 있다. 이를 위해 새로운 write driver를 사용하여 low-swing 쓰기동작 시 성능 감소를 최소화하였다. 누설전력 소비 감소 기법과 스위칭 전력 소비 감소 기법을 동시에 사용함으로써 제안된 SRAM은 특히 미래의 큰 누설전류가 예상되는 70-nm 이하 급 초미세 공정에서 유용할 것으로 예측된다. 70-nm 공정 파라미터를 이용해서 시뮬레이션한 결과 누설전력 소비의 93%와 스위칭 전력 소비의 43%를 줄일 수 있을 것으로 보인다. 본 논문에서 제안된 저전력 SRAM의 유용성과 신뢰성을 검증하기 위해서 $0.35-{\mu}m$ CMOS 공정에서 32x128 bit SRAM이 제작 및 측정되었다. 측정 결과 기존의 SRAM에 비해 스위칭 전력이 30% 적게 소비됨을 확인하였고 사용된 메탈 차폐 레이어로 인해서 $V_{DD}-to-V_{SSH}$ 전압이 약 1.1V 일 때까지 오류 없이 동작함을 관측하였다. 본 논문의 SRAM 스위칭 전력감소는 I/O의 bit width가 증가하면 더욱 더 중요해질 것으로 예상할 수 있다.

• 항공우주정책ㆍ법학회지
• /
• 제35권1호
• /
• pp.33-62
• /
• 2020

현재의 항공운송산업은 시장의 양적 성장 측면 뿐 아니라 법제적(法制的) 측면에서도 많은 변화를 맞이하고 있다. 지난 오랜 세월동안 바르샤바 협약은 국제항공운송에서 발생되는 항공운송인의 민사책임의 통일적 규율에 기여하고 항공운송산업의 발전을 위해 법제적 후견인의 소임을 다하였다. 하지만 그 과정에서 항공운송산업의 소비자 이익은 다른 산업과 비교할 때 그다지 탄탄한 보호를 받지 못하였다. 이에 대한 반성으로 몬트리올 협약은 항공소비자 이익보호라는 기치를 내걸었고, 전 세계 곳곳에서 여객과 같은 항공소비자 보호를 위한 움직임이 나타나고 있다. 항공사고에 따른 항공여객의 정신적 손해배상문제도 항공소비자 보호의 일환으로 이해될 수 있다. 미국 연방법원은 1990년대 초부터 항공여객의 정신적 손해배상에 관한 인정여부를 다루었던 점을 감안하면, 아직까지 항공사고에 따른 정신적 손해를 그 배상범위에서 제외하고 있는 우리나라 판례도 방향전환을 고민해 볼 필요가 있다고 생각한다. 이런 측면에서 항공사고로 여객의 신체손해가 발생하였음을 전제로, 항공사고에 따른 정신적 손해를 적극적으로 인정하는 미연방법원의 최신 판례를 분석해 보는 것은 학문적 의의를 가진다. 정신적 손해에 관한 가장 최신 판례라 할 수 있는 지난 2017년 8월 미연방 제6항소법원에서는 다소 이례적인 결론이 도출되었다. Doe v. Etihad Airways사건에서 법원이 신체손해와 직접적인 인과관계가 있는 정신적 손해에 관해서만 손해배상책임을 인정한 종래 절충적 입장을 견지하였던 다수의 연방법원들과 달리 정신적 손해와 신체적 손해 사이의 인과적 연결고리(causal connection)가 존재하지 않는 경우에도 정신적 손해배상이 인정될 수 있다고 판단하였다. 법원이 이러한 결론에 이르게 된 배경은 여러 가지로 설명될 수 있겠지만, 과거 바르샤바 협약과 달리 항공운송산업의 보호와 육성이라는 시대적 명제를 뒤로 하고 몬트리올 협약이 선언한 항공소비자 보호라는 목소리에 귀를 기울인 결과로 볼 수 있다.

• Korean Chemical Engineering Research
• /
• 제55권1호
• /
• pp.93-98
• /
• 2017

본 실험에서는 $Cu_2ZnSnS_4$(CZTS) 태양전지의 흡수층 상부에 다양한 조성을 갖는 $Zn(O_x,S_{1-x})$ 버퍼층을 적용하여 특성 변화를 살펴보았다. $Zn(O_{0.76},S_{0.24})$, $Zn(O_{0.56},S_{0.44})$, $Zn(O_{0.33},S_{0.67})$ 그리고 $Zn(O_{0.17},S_{0.83})$의 4가지 단일막의 경우, 전자-정공의 재결합 억제에 유리한 밴드갭 구조를 나타내는 $Zn(O_{0.76},S_{0.24})$ 버퍼층을 소자에 적용했다. $Zn(O_{0.76},S_{0.24})$ 버퍼층을 소자에 적용 시, 흡수층으로부터 S가 버퍼층으로 확산되어 소자 내에서의 버퍼층은 $Zn(O_{0.7},S_{0.3})$의 조성을 나타냈다. CdS 버퍼층의 $E_V$보다 낮은 에너지 준위를 갖는 $Zn(O_{0.7},S_{0.3})$ 버퍼층은 전자-정공 재결합을 효과적으로 억제하기 때문에 CZTS 태양전지의 $J_{SC}$와 $V_{OC}$ 특성을 향상시켰다. 이를 통해 CdS 버퍼층이 적용된 CZTS 태양전지의 효율인 2.75%가 $Zn(O_{0.7},S_{0.3})$ 버퍼층 적용을 통해 4.86%로 향상되었다.

• 생물정신의학
• /
• 제14권3호
• /
• pp.184-193
• /
• 2007

목 적: 소뇌가 운동조절 뿐아니라 인지기능과 정신과적 증상에도 중요한 역할을 하고있다는 증거들은 많다. 정신분열병에서 소뇌기능은 많은 연구들에서 대뇌고위기능의 조정곤란(Cognitive dysmetria)이라는 개념을 통해 주목 받아왔다. 다시말하면, 전전두엽-소뇌-시상핵-전전두엽 회로의 이상은 정신분열병에서 인지기능의 손상과 임상증상으로 나타날 수 있는 것이다. 본 연구의 주 목적은 남자 정신분열병 환자에서 소뇌기능이상을 ICARS를 통해 반정량적으로 평가하고, 이것이 임상 및 인지기능과 어떤 연관성이 있는지 알아보는 것이다. 방 법: 저자들은 DSM-IV-TR 진단기준에 따라 정신분열병으로 진단된 47명의 남자 정신분열병 환자와 이와 성별과 나이를 맞춘 건강한 대조군 30명을 소뇌의 신경학적 징후를 ICARS로 점수화하여 비교하였다. 반정량적으로 100점의 총점을 가진 ICARS는 자세와 보행, 사지운동기능, 언어장애, 안구운동장애의 4개의 구획으로 나뉜 19개 항목으로 구성되어 있다. 모든 실험군은 한국형 간이정신상태검사(K-Mini Mental status examination, MMSE), 언어유창성 검사(Verbal fluency test), 시계그림검사(Clock drawing test)를 통해 인지기능검사를 받았다. 환자군에서 임상증상의 심각도는 한국형 양성 및 음성 증상 척도Positive and Negative Symptom Scale(PANSS)로 평가하였다. 환자군에서 ICARS의 높은 점수가 추체외로증상이나 지발성운동장애와 같이 약물사용으로 인한 부작용과 관련이 있는지 여부를 확인하기위하여 Abnormal Involuntary Movement Scale(AIMS)를 시행하였다. 실험군과 변수들에서 통계적 유의성을 보기위해 독립표본 t 검증과 편상관분석을 사용하였다. 결 과: 정신분열병 환자들은 대조군에 비해 ICARS-자세와 보행장애, 운동기능, 안구운동장애-에서 유의하게 높은 점수를 보였다. 환자들은 인지기능검사에서도 보다 심각한 손상을 보였다. ICARS 점수와 PANSS로 평가한 환자들의 음성증상 총점과는 유의한 상관관계가 있었으며, 인지기능검사에서는 시계그림검사, 언어유창성 검사가 음성증상과 유의하게 연관이 있었다. 또, 시계그림검사는 ICARS 점수와 연관이 있었다. 정신분열병 환자에서 발병연령, 유병기간 및 AIMS 점수가 줄수있는 혼란변수는 회귀분석을 사용하여 평가하였으며, AIMS 점수는 ICARS의 점수와 연관성을 보이지 않았다. 결 론: 정신분열병은 발달학적 혹은 신경발달학적 질환으로 개념 내려지고 있다. 대부분의 연구자들은 정신분열병을 가진 환자들이 대뇌고위기능의 조정곤란(Cognitive dysmetria)이라고 불리는 전전두엽-시상핵-소뇌회로의 이상으로 인해 고통받고 있다고 하였다. 본 연구에서 저자들은 정신분열병 환자들이 인지기능과 소뇌기능에서 심각한 손상을 가지고 있고, 특히 이것은 환자들의 음성증상의 정도와 상관관계가 있다는 것을 확인하였다. 이 결과는 정신분열병에서 소뇌의 역할에 대해 지지하고 있다. 또, 정신분열병 환자들의 연성신경학적 징후를 평가하는데 있어 ICARS라는, 구조화되어 다른 검사자들에게도 통용될 수 있는 도구를 사용했다는 것에서 의미가 있다고 볼 수 있겠다. 향후 유사한 연구에서는 질병의 경과에 따라 신경학적 징후의 변화에 대해 설명할 수 있기를 기대한다.

• 설비공학논문집
• /
• 제27권7호
• /
• pp.380-394
• /
• 2015

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2014. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of heat and mass transfer, cooling and heating, and air-conditioning, the flow inside building rooms, and smoke control on fire. Research issues dealing with duct and pipe were reduced, but flows inside building rooms, and smoke controls were newly added in thermal and fluid engineering research area. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for thermal contact resistance measurement of metal interface, a fan coil with an oval-type heat exchanger, fouling characteristics of plate heat exchangers, effect of rib pitch in a two wall divergent channel, semi-empirical analysis in vertical mesoscale tubes, an integrated drying machine, microscale surface wrinkles, brazed plate heat exchangers, numerical analysis in printed circuit heat exchanger. In the area of pool boiling and condensing, non-uniform air flow, PCM applied thermal storage wall system, a new wavy cylindrical shape capsule, and HFC32/HFC152a mixtures on enhanced tubes, were actively studied. In the area of industrial heat exchangers, researches on solar water storage tank, effective design on the inserting part of refrigerator door gasket, impact of different boundary conditions in generating g-function, various construction of SCW type ground heat exchanger and a heat pump for closed cooling water heat recovery were performed. (3) In the field of refrigeration, various studies were carried out in the categories of refrigeration cycle, alternative refrigeration and modelling and controls including energy recoveries from industrial boilers and vehicles, improvement of dehumidification systems, novel defrost systems, fault diagnosis and optimum controls for heat pump systems. It is particularly notable that a substantial number of studies were dedicated for the development of air-conditioning and power recovery systems for electric vehicles in this year. (4) In building mechanical system research fields, seventeen studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, and renewable energies, piping in the buildings. Proposed designs, performance performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the evaluation of work noise in tunnel construction and the simulation and development of a light-shelf system. The subjects of building energy were worked on the energy saving of office building applied with window blind and phase change material(PCM), a method of existing building energy simulation using energy audit data, the estimation of thermal consumption unit of apartment building and its case studies, dynamic window performance, a writing method of energy consumption report and energy estimation of apartment building using district heating system. The remained studies were related to the improvement of architectural engineering education system for plant engineering industry, estimating cooling and heating degree days for variable base temperature, a prediction method of underground temperature, the comfort control algorithm of car air conditioner, the smoke control performance evaluation of high-rise building, evaluation of thermal energy systems of bio safety laboratory and a development of measuring device of solar heat gain coefficient of fenestration system.

• 설비공학논문집
• /
• 제12권12호
• /
• pp.1098-1125
• /
• 2000

A review on the papers published in the Korean Journal of Air-Conditioning and Refrigerating Engineering in 1998 and 1999 has been done. Focus has been put on current status of research in the aspect of heating, cooling, ventilation, sanitation and building environment. The conclusions are as follows. 1) A review of the recent studies on fluid flow, turbomachinery and pipe-network shows that many experimental investigations are conducted in applications of impingement jets. Researches on turbulent flows, pipe flows, pipe-networks are focused on analyses of practical systems and prediction of system performance. The results of noise reduction in the turbomachinery are also reported. 2) A review of the recent studies on heat transfer analysis and heat exchanger shows that there were many papers on the channel flow with the application to the design of heat exchanger in the heat transfer analysis. Various experimental and numerical papers on heat exchanger were also published, however, there were few papers available for the analysis of whole system including heat exchanger. 3) A review of the recent studies on heat pump system have focused on the multi-type system and the heat pump cycle to utilize treated sewage as the heat source. The defrosting and the frosting behaviors in the fin-tube heat exchanger is experimentally examined by several authors. Several papers on the ice storage cooling system are presented to show the dynamic simulation program and optimal operation conditions. The study on the micro heat pipes for the cooling of high power electronic components is carried out to examine the characteristics of heat and mass transfer processed. In addition to these, new type of separate thermosyphon is studied experimentally. 4) The recent studies on refrigeration/air conditioning system have focused on the system performance and efficiency for new alternative refrigerants. New systems operating with natural refrigerants are drawing lots of attention. In addition to these, evaporation and condensation heat transfer characteristics of traditional and new refrigerants are investigated for plain tubes and also for microfin tubes. Capillary tubes and orifice are main topics of research as expansion devices and studies on thermophysical properties of new refrigerants and refrigerant/oil mixtures are widely carried out. 5) A review of the recent studies on absorption cooling system shows that numerous experimental and analytical studies on the improvement of absorber performance have been presented. Dynamic analysis of compressor have been performed to understand its vibration characteristics. However research works on tow-phase flow and heat transfer, which could be encountered in the refrigeration system and various phase-change heat exchanger, were seemed to be insufficient. 6) A review of recent studies on duct system shows that the methods for circuit analysis, and flow balancing have been presented. Researches on ventilation are focused on the measurement of ventilation efficiency, and variation of ventilation efficiency with ventilation methods by numerous experimental and numerical studies. Furthermore, many studies have been conducted in real building in order to estimate indoor thermal environments. Many research works to get some information for cooling tower design have been performed but are insufficient. 7) A review on the recent studies on architectural thermal environment and building mechanical systems design shows that thermal comfort analysis is sitting environment, thermal performance analysis of Korean traditional building structures., and evaluation of building environmental load have been performed. However research works to improve the performance of mechanical system design and construction technology were seemed to be insufficient.

• 설비공학논문집
• /
• 제25권6호
• /
• pp.346-361
• /
• 2013

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2012. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. The conclusions are as follows : (1) The research works on thermal and fluid engineering have been reviewed as groups of fluid machinery, pipes and valves, fuel cells and power plants, ground-coupled heat pumps, and general heat and mass transfer systems. Research issues are mainly focused on new and renewable energy systems, such as fuel cells, ocean thermal energy conversion power plants, and ground-coupled heat pump systems. (2) Research works on the heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer, and industrial heat exchangers. Researches on heat transfer characteristics included the results for natural convection in a square enclosure with two hot circular cylinders, non-uniform grooved tube considering tube expansion, single-tube annular baffle system, broadcasting LED light with ion wind generator, mechanical property and microstructure of SA213 P92 boiler pipe steel, and flat plate using multiple tripping wires. In the area of pool boiling and condensing heat transfer, researches on the design of a micro-channel heat exchanger for a heat pump, numerical simulation of a heat pump evaporator considering the pressure drop in the distributor and capillary tubes, critical heat flux on a thermoexcel-E enhanced surface, and the performance of a fin-and-tube condenser with non-uniform air distribution and different tube types were actively carried out. In the area of industrial heat exchangers, researches on a plate heat exchanger type dehumidifier, fin-tube heat exchanger, an electric circuit transient analogy model in a vertical closed loop ground heat exchanger, heat transfer characteristics of a double skin window for plant factory, a regenerative heat exchanger depending on its porous structure, and various types of plate heat exchangers were performed. (3) In the field of refrigeration, various studies were executed to improve refrigeration system performance, and to evaluate the applicability of alternative refrigerants and new components. Various topics were presented in the area of refrigeration cycle. Research issues mainly focused on the enhancement of the system performance. In the alternative refrigerant area, studies on CO2, R32/R152a mixture, and R1234yf were performed. Studies on the design and performance analysis of various compressors and evaporator were executed. (4) In building mechanical system research fields, twenty-nine studies were conducted to achieve effective design of mechanical systems, and also to maximize the energy efficiency of buildings. The topics of the studies included heating and cooling, HVAC system, ventilation, renewable energy systems, and lighting systems in buildings. New designs and performance tests using numerical methods and experiments provide useful information and key data, which can improve the energy efficiency of buildings. (5) In the fields of the architectural environment, studies for various purposes, such as indoor environment, building energy, and renewable energy were performed. In particular, building energy-related researches and renewable energy systems have been mainly studied, reflecting interests in global climate change, and efforts to reduce building energy consumption by government and architectural specialists. In addition, many researches have been conducted regarding indoor environments.

• 한국환경복원기술학회지
• /
• 제25권4호
• /
• pp.33-47
• /
• 2022

Wild boars(Sus scrofa) are expanding their range of behavior as their habitats change. Appearing in urban centers and private houses, it caused various social problems, including damage to crops. In order to prevent damage and effectively manage wild boars, there is a need for ecological research considering the characteristics and movement characteristics of wild boars. The purpose of this study is to analyze home range and identify land cover types in key areas through tracking wild boars, and to predict the movement connectivity of wild boars in consideration of previous studies and their preferred land use characteristics. In this study, from January to June 2021, four wild boars were captured and tracked in Jinju city, Gyeongsangnam-do, and the preferred land cover type of wild boars was identified based on the MCP 100%, KDE 95%, and KDE 50% results. As a result of the analysis of the home range for each individual, it was found that 100% of MCP was about 0.68km², 2.77km², 2.42km², and 0.16km², and the three individuals overlapped the home range, refraining from habitat movement and staying in the preferred area. The core areas were analyzed as about 0.55km², 2.05km², 0.82km², and 0.14km² with KDE 95%., and about 0.011km², 0.033km², 0.004km², and 0.003km² with KDE 50%. When the preferred land cover type of wild boar was confirmed based on the results of analysis of the total home range area and core area that combined all individuals, forests were 55.49% (MCP 100%), 54.00% (KDE 95%), 77.69% (KDE 50%), respectively, with the highest ratio, and the urbanization area, grassland, and agricultural area were relatively high. A connectivity scenario was constructed in which the ratio of the land cover type preferred by the analyzed wild boar was reflected as a weight for the resistance value of the connectivity analysis, and this was compared with the connectivity evaluation results analyzed based on previous studies and wild boar characteristics. When the current density values for the wild boar movement data were compared, the average value of the existing scenario was 2.76, the minimum 1.12, and the maximum 4.36, and the weighted scenario had an average value of 2.84, the minimum 0.96, and the maximum 4.65. It was confirmed that, on average, the probability of movement predictability was about 2.90% better even though the weighted scenario had movement restrictions due to large resistance values. It is expected that the identification of the movement route through the movement connectivity analysis of wild boars can be suggested as an alternative to prevent damage by predicting the point of appearance. In the future, when analyzing the connectivity of species including wild boar, it is judged that it will be effective to use movement data on actual species.

• 심성연구
• /
• 제33권2호
• /
• pp.141-194
• /
• 2018

용호비결은 조선 중기의 문신이던 정렴(1506~1549년) 선생이 저술한 일종의 선도(仙道) 수련서로 매월당 김시습의 용호론의 맥을 잇는 조선시대 가장 중요한 도교문헌의 하나라고 할 수 있다. 본 논문은 정렴 선생과 용호비결 판본에 대하여 소개하고 책의 제목인 용호(龍虎), 책의 내용 중 수단지도(修丹之道), 폐기(閉氣), 호흡법, 단전(丹田), 현빈일규(玄牝一竅)의 연금술적 내용을 분석심리학적 측면에서 살펴보았다. 용호(龍虎)는 정신양(psychoid) 단계에서 작용하는 변환의 요소로 이를 통하여 단(丹)이 만들어지는데 단(丹)은 메르쿠리우스이자 철학자의 돌로 연금술의 적화 단계를 의미하기도 한다. 정렴 선생은 단(丹)을 이루기 위하여 가늘고 긴 호흡을 통한 단전에의 집중을 강조하였는데 이를 폐기(閉氣)라고 한다. 폐기(閉氣)는 능동적으로 니그레도(nigredo) 상태로 들어가는 것으로 이때 우리의 정신은 외부로 향한 투사를 거두어들여 단전(丹田)을 향해 집중한다. 니그레도를 통한 지속적인 수련은 알베도(albedo) 상태로의 이행을 가능케 하며 이를 통해 투사에 의한 객체의 오염으로부터 정신이 자유로와져 마음의 중심이 자아(ego)로부터 자기(Self)로 옮겨간다. 현빈일규(玄牝一竅)란 노자가 곡신(谷神)으로 표현한 우주의 여성적 원리를 경험하고 이를 체화하는 것이다.