• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제55권7호
• /
• pp.374-379
• /
• 2006

The switch mode power supply is a source of EMI with other equipment as well as with its own proper operation because of rapid changes in voltages and currents within a switching converter. The EMI is transmitted in two forms: radiated and conducted. Conducted noise consists of two categories known as the differential mode and the common mode. Common mode noise current is a major source of EMI in the switch mode Power supply. Recently, a current balancing technique has been studied to reduce the common mode noise. This paper investigates the reduction of common mode noise according to a node expansion of the switch mode power supply which is based on a current balancing technique. In this paper, seven PCB patterns of the forward converter are manufactured and experimented.

• 전력전자학회논문지
• /
• 제26권4호
• /
• pp.249-255
• /
• 2021

A novel current balancing technique for multichannel light-emitting diode (LED) that uses a series resonance and coupled inductor is proposed in this paper. The proposed LED driver balances output currents through frequency control and enables zero-voltage switching. The proposed converter utilizes the charge balance condition of the resonant capacitor and the current sharing function of the coupled inductor to achieve whole LED current balancing without an additional controller. The proposed coupled inductor can integrate the current balancing function and the resonant inductor, so the power density can be increased by reducing the number of magnetic devices. A 40 W prototype is built to verify the validity of this LED driver, and the experimental results are successfully obtained.

• 전력전자학회논문지
• /
• 제27권1호
• /
• pp.9-17
• /
• 2022

The series-connected semiconductor devices structure is one way to achieve a high voltage rating. However, a problem with voltage imbalance exists in which different voltages are applied to the series-connected switches. This paper proposed a new voltage balancing technique that controls the turn-off delay time of the switch by adding one bipolar junction transistor to the gate turn-off path. The validity of the proposed method is proved through simulation and experiment. The proposed active gate driver not only enables voltage balancing across a variety of current ranges but also has a greater voltage balancing performance compared with conventional RC snubber methods.

• 전력전자학회논문지
• /
• 제27권4호
• /
• pp.348-355
• /
• 2022

A bipolar DC distribution system suffers from an imbalance in voltages when asymmetric loads are connected at the outputs. Dedicated voltage balancers are required to address the imbalance in bipolar voltage levels. However, additional components eventually increase the cost and decrease the efficiency and power density of the system. Therefore, to deal with the imbalance in output voltages without adding any extra components, this study presents a coupled inductor-based voltage balancing technique with a dual-output CLL resonant converter. The proposed coupled inductor does not require extra magnetic components to balance the output voltages because it is the result of resonant inductors of the CLL tank circuit. It can also avoid complex control schemes applied to voltage balancing. Moreover, with the proposed coupled inductor, the CLL converter acquires good features including zero voltage and zero current switching. Detailed analysis of the proposed coupled inductor is presented with different load conditions. A 3.6-kW hardware prototype was built and tested to validate the performance of the proposed coupled inductor-based voltage balancing technique.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.249-250
• /
• 2008

In the field of mobile communications, load balancing between 3GPP LTE and other networks is expected to be an important topic from the perspective of current technical development. The load balancing technique includes the definition of functions and structures needed to incooperate 3G LTE E-Node B and base-stations designed for heterogeneous networks. The major goal attained from this paper is to ensure an algorithm for the mechanism of load balancing and to achieve a technical leading for the next generation mobile network.

• 전력전자학회논문지
• /
• 제27권5호
• /
• pp.417-424
• /
• 2022

This study proposes a current-balancing technique for an interleaved buck converter using a variable inductor and a snubber capacitor. The proposed scheme balances the inductor current by using the variable inductor and enables zero voltage switching under all load ranges. With the variable inductor, the ripple of inductor current changes according to load variation. In addition, a 1.6 kW prototype is built to verify the validity of the proposed scheme, and the experimental results are successfully obtained.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1876-1879
• /
• 2003

Due to the conventional half-bridge switch-mode converters for dc motor drive have been usually using unbalanced circuit topologies which generate common-mode currents through parasitic capacitors distributed between the ground and the dc motor frame such as the heat-sink of switching devices or the frame of the dc motor. This paper describes methods that cancel common-mode current generated in half-bridge switch-mode converters by using circuit balancing technique. The circuit balancing is to make the noise pickup or occurring in both conductor lines, signal and return pathes, is equal in amplitude and opposite in phase so that it will be canceled out in the ground plane. The common-mode current cancellation in the proposed converter is confirmed by experimental results.

• 한국통신학회논문지
• /
• 제33권7A호
• /
• pp.757-767
• /
• 2008

차세대 이동 통신망의 발전으로 상용 망과 이 기종 망이 서로 겹쳐진 다중 망 구조가 형성될 것이다. 이러한 여러 망이 겹쳐진 다중 망 구조에서 전체 무선자원의 사용 효율을 높이고 Eb/Io (bit energy-to-interference plus noise density ratio)를 개선하기 위해 이기종망간 혹은 동종망간 상호 연동 기술이 필요하다. 본 논문에서는 이러한 동종망과 이기종망들이 서로 겹쳐져 있는 다중 셀 환경에서 load를 효율적으로 분산시킴으로써 무선 자원의 효율을 높이고 신호의 간섭양을 줄여 사용자의 QoS 보장 및 성능 개선을 위한 soft load balancing algorithm을 제안 및 분석한다. 본 논문에서는 수학적 분석을 통해 효율적인 load sharing을 위한 최적의 LBR (load balancing ratio) 을 구하고 이를 이용하여 각 network에 traffic 양을 할당하여 서비스한다. 그러므로 soft load balancing 알고리듬은 보다 안정적인 데이터 전송을 가능하게 한다.

• 정보처리학회논문지D
• /
• 제15D권1호
• /
• pp.73-86
• /
• 2008

최근 RFID(Radio Frequency Identification) 기술은 사물에 대한 자동적인 인식을 가능케 함으로써 물류, 의료, 식품관리 등과 같은 분야에 적용되고 있다. 부하 분산은 과부하 상태인 노드로부터 부하가 적은 노드로 작업 부하를 이동시켜 시스템의 확장성을 향상시키는 기본 기술이다. 시스템의 부하를 예측하기 어렵고 부하량의 편차가 큰 경우에는 적응적 부하 분산이 효과적인 것으로 알려져 있다. RFID 미들웨어는 많은 수의 리더로부터 수신된 태그 정보를 효율적으로 처리하기 위하여 기존의 부하 분산기술이 도입될 필요가 있다. RFID 시스템이 부하량을 예측하기 힘들고 편차가 큰 환경에 적용될 경우 실행시간에 시스템의 전체 부하량에 따라 적합한 정책으로 변경할 수 있는 적응적 부하 분산 기법을 사용하는 것이 바람직하다. 본 논문에서는 RFID 미들웨어에 적응적 부하 분산 기법을 도입하기 위한 접근 방법과 결과를 제시한다. 먼저 RFID 미들웨어의 작업 부하 모델을 결정한다. 그리고 부하 모델을 바탕으로 다양한 부하 분산 정책을 시스템의 부하 상태 별로 적용하여 시스템의 부하 상태에 적합한 부하 분산 정책을 선택한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1881-1884
• /
• 2003

In some requirements of dc motor drive circuit applications are high quality output with generation of low internal conducted EMI. However the conventional dc motor drive circuits have been usually using unbalanced circuit which generates the high conducted EMI to the frame ground. This paper presents a balanced dc motor drive circuit which is effective way to reduce the common-mode noise. The circuit balancing is to make the noise pick up or occurring in both conductor lines, signal path and return path is equal in amplitude and opposite phase so that it will cancel out in the frame ground. The common-mode conducted noise reduction of this proposed dc motor drive is confirmed by experimental results.