• Ocean Science Journal
• /
• 제42권2호
• /
• pp.89-102
• /
• 2007

The surface circulation of northern South China Sea (hereafter SCS) for the period 1987-2005 was studied using the data of more than 500 satellite-tracked drifters and wind data from QuikSCAT. The mean flow directions in the northern SCS except the Luzon Strait (here after LS) during the periods October_March was southwestward, and $April{\sim}September$ northeastward. A strong northwestward intrusion of the Kuroshio through the LS appears during the $October{\sim}March$ period of northeasterly wind, but the intrusion became weak between April and September. When the strong intrusion occurred, the eddy kinetic energy (EKE) in the LS was $388cm^2/s^2$ which was almost 2 times higher than that during the weak-intrusion season. The volume transport of the Kuroshio in the east of the Philippines shows an inverse relationship to that of the LS. There is a six-month phase shift between the two seasonal phenomena. The volume transport in the east of the Philippines shows its peak sis-month earlier faster than that of the LS. The strong Kuroshio intrusion is found to be also related to the seasonal variation of the wind stress curl generated by the north easterly wind. The negative wind stress curl in the northern part of LS induces an anticyclonic flow, while the positive wind stress curl in the southern part of LS induces a cyclonic flow. The northwestward Kuroshio intrusion in the northern part of LS happened with larger negative wind stress curl, while the westward intrusion along $20.5^{\circ}N$ in the center of the LS occurred with weaker negative wind stress curl.

• The Journal of Korean Physical Therapy
• /
• 제25권3호
• /
• pp.149-154
• /
• 2013

Purpose: Spinal instability due to weakness of abdominal muscles is one of the major causes that induces low back pain (LBP). The purpose of this study was to investigate any differences in abdominal muscle activity during curl up, roll out, and jack knife exercises using a swiss-ball or sling. Methods: Twenty healthy subjects were randomly assigned into either a swiss-ball exercise group (SBEG) or a sling exercise group (SEG). Subjects performed curl up, roll out and jack knife exercises using the swiss ball or sling. Activity of abdominal muscles (rectus abdominis and external oblique muscle) was assessed using surface EMG and normalized maximal voluntary isometric contraction (MVIC). The significance of differences between the sling exercise group and the swiss-ball exercise group was evaluated by the independent t-test. Results: These Results indicated that activities of rectus abdominis on right and left of the SEG during the curl up exercise were significantly greater than the SBEG. During the roll out exercise, activity of the abdominal muscle was not significantly different between the SEG and SBEG. In addition, during the jack knife exercise, activities of the right rectus abdominis and left external oblique muscle in the SEG were significantly greater than the SBEG. Conclusion: In conclusion, activity of the abdominal muscles was maximized when curl up and jack knife exercise were performed using the sling rather than the swiss-ball. Therefore, if increased activation of the abdominal muscle is the goal of an exercise program, curl up and jack knife exercises may be useful.

• 소성∙가공
• /
• 제22권1호
• /
• pp.11-16
• /
• 2013

Despite its importance the control of roller leveling has primarily relied on the operator's experience and on operation tables. In order to effectively eliminate various shape defects, the optimal leveling condition for a specific mode of plate deformation needs to be determined as well as a careful evaluation as to whether or not the condition is still appropriate for other modes or not. A numerical model, which considers both computation efficiency and accuracy, has been developed. The variations of residual stress are studied according to the entry and the delivery intermeshes, respectively. The camber deformation decreases linearly as the entry intermesh increases. In contrast the curl deformation does not vary directly with the entry intermesh. Therefore, the optimum intermesh values need to be determined in order to simultaneously minimize both the camber and the curl deformation.

• The Plant Pathology Journal
• /
• 제25권4호
• /
• pp.328-332
• /
• 2009

Diseases caused by Pepper yellow leaf curl virus infection is considered to be emerging plant diseases in Indonesia in the last five years. One key factor for disease management is the availability of accurate detection of the virus in plants. Polyclonal antibody for Pepper yellow leaf curl Indonesia virus-Bogor (PYLCIV-Bgr) was produced for detection of the virus using I-ELISA and DIBA methods. The antibody was able to detect PYLCIV-Bgr from infected plants up to dilution 1/16,384 and cross reaction was not observed with Cucumber mosaic virus (CMV), Tobacco mosaic virus (TMV), and Chilli veinal mottle virus (ChiVMV). Positive reaction was readily detected in membrane containing Begomovirus samples from Yogyakarta (Kaliurang and Kulonprogo) and West Java (Bogor and Segunung). Infection of PYLCIV-Bgr in chillipepper, tomato, and Ageratum conyzoides was also confirmed using polyclonal antibody for PYLCIV-Bgr in DIBA. Polyclonal antibody for PYLCIV-Bgr is suggested to be included in disease management approach due to its good detection level.

• 반도체디스플레이기술학회지
• /
• 제8권4호
• /
• pp.7-13
• /
• 2009

The slender device(long length and thin width) manufactured by stereolithography process suffers from large curl distortion. This paper adapts two control parameters such as a critical exposure and a penetration depth. The measurement of the test parts dimension are carried out by reverse engineering method with the optical 3-dimensional measurement equipment. We investigate how each parameter contributes to the part accuracy and estimates the optimal set of parameters which minimizes the dimensional error of the test parts. Finally, As being an the RAM slot as being an example of the slender device, the RAM slot is made with the optimal values of control parameter and the results are investigated

• 소성∙가공
• /
• 제12권8호
• /
• pp.718-723
• /
• 2003

Tn order to develop springback control technology for high-strength steel sheets, several studies have been conducted: dome stretching test, stepped s-rail forming and springback measurement, and optimally shaped initial blank design. First, to find out the formability of TRIP60, dome stretching test was performed. Next, the stepped s-rail die, which was designed to form a channel type panel with large twist and wall curl, was manufactured and used to evaluate the effect of controlling forming variables, such as blank holding force and flange amount on the springback. Furthermore, new measurement method of the springback was introduced to define wall curl and twist in geometrically complex panels. Finally, the optimally shaped initial blank was employed to verify one of the best ways to control the springback in channel type. high-strength sheet panels.

• 한국공작기계학회논문집
• /
• 제15권3호
• /
• pp.32-38
• /
• 2006

During stereolithography processes, the shape errors such as curl distortion and distortion of side face are generated due to the shrinkage of liquid resins. In this study, the effects of dimension of part and structure of supports on the shape error are examined. Cubic specimens which have different thicknesses are manufactured and their deformations are measured with CMM. Thicker part generates smaller curl distortion of top face and larger of bottom face. Also thicker part generates larger distortion of side face until part thickness increases to about 20mm. Larger stiffness of supports which is obtained by shorter spacing of the supports and line type contact instead of point type contact generates smaller shape error of the part.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.326-329
• /
• 2009

In order to analyze the effect of leveling conditions on residual stress evolution of hot rolled high strength steels, a numerical algorithm was developed. It was able to implement the effect of plastic fraction (intermesh) in leveling, line tension, work roll bending, and initial residual stress and curl distribution. The effect of work roll bending on residual stress and curl were studied by using the developed program. The validity of simulated results was verified from comparison with the experimentally measured residual stress and curl in a sheet.

• 물과 미래
• /
• 제19권3호
• /
• pp.239-248
• /
• 1986

Monthly wind stress, wind stress curl and volume transport stream functions are computed in the Eastern Sea(Japan Sea) based upon observed wind and atmospheric pressure data respectively. The presented two results show different distributios on locality and season but as common features the results reveal the northwesterly surface wind stress \ulcorner 새 the monsoon in winter, south to southwesterly wind stress \ulcorner 새 the southerly wind in summer and strond anticyclonic curl in the northern part on the Eastern Sea(Japan Sea) in winter. In the distributions obtained from the sea level atmospheric pressure data, the maximum value of the wind stress and of curls of small scales are shown off the southeast coast of Siberia and northeast coast of Korea. Volume transport distributions obtained from the Sverdrup relationship suggest that the strong northward boundary current can be formed along the northeast coast of Korea in winter and weak southward boundary current in summer.

• 한국공작기계학회논문집
• /
• 제14권6호
• /
• pp.61-67
• /
• 2005

During stereolithography processes, one of the main sources of dimensional error of prototype is the distortion effect owing to the shrinkage of resin. In this study, the effects of dimension of specimen, such as length, width, and thickness, on the curl distortion is examined. During the SL processes, the variation of curl distortion ewer is measured according to the number of layers, Through this study, it is verified that there is a big difference of the distortion error in both direction and magnitude between before and after the supports are removed. It Is also observed that end profile of the test part and the upper side around the border are also distorted due to the shrinkage of the resin.