• 콘크리트학회논문집
• /
• 제29권2호
• /
• pp.141-148
• /
• 2017

본 연구는 PC부재의 공장생산에 있어서 여러 가지 증기양생 조건의 변수에 따른 고강도 콘크리트의 초기 압축강도 발현성상을 실험적으로 검증하고, 최적 양생조건을 확인하기 위한 것이다. 40 MPa 이상의 고강도 콘크리트 제조에는 보통 포틀랜드 시멘트를 사용하였으며, 콘크리트의 배합조건은 물-시멘트비 3종류(W/C 25%, 35% 및 45%)를 대상으로 하였다. 본 연구의 증기양생 변수로 (1) 전치양생 시간 3종류, (2) 최고 양생온도 3종류, (3) 최고온도 유지시간 3종류, (4) 승온 및 강온양생 온도 1종류 등을 대상으로 재령별 압축강도 시험을 실시하였다. 또한, 증기양생 및 표준양생에 따른 재령별 강도발현을 비교하였다. 실험결과, (1) 전치양생은 콘크리트의 초기 응결시간 이상, (2) 최고 양생온도는 $55^{\circ}C$ 이하, (3) 최고온도 유지시간은 6시간 이하로 하는 것이 증기양생 고강도 콘크리트의 강도발현에 적합한 양생조건으로 나타났다. 또한, 재령 28일에서 증기양생과 표준양생의 압축강도 발현성상의 역전현상이 발생하였다. 따라서 이러한 양생조건으로 PC부재의 생산성 및 현장관리를 위한 기초자료로 제시하고자 한다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2003년도 학술.기술논문발표회
• /
• pp.35-38
• /
• 2003

The purpose of this study is to investigate the manufacture of light weight concrete panel using the artificial light-weight aggregate as a part of the substitution of foamed styrene and polyurethane because of narrow allocable temperature Bone in use. The experimental parameter of this study is 40, 60 and 8$0^{\circ}C$ of curing temperature at 100% relative humidity and the type of admixture such as cement, 6mm glass fiber and St/BA emulsion. Testing item is compressive and flexural strength and strength of specimen cured at standard condition is compared to that of specimen cured at 40, 60 and 8$0^{\circ}C$ of curing temperature at 100% relative humidity. As a result or this, it was revealed that the maximum or strength is developed in 6$0^{\circ}C$ or cure temperature at 100% relative humidity in case of the most of the specimen. Specimens modified by St/BA emulsion show the highest development of strength dependent on the curing tmeperature. So, it seems to be effective that evaporation curing method shoud be considered to curing the specimen as the panel core.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 추계 학술논문 발표대회
• /
• pp.255-256
• /
• 2011

This study investigates the effect of a curing condition on the temperature history and strength development of concrete under -10℃. Combination of various curing methods was applied, i.e. a conventional form was combined with compressed insulation, heat panel and heat cable. Results showed that the concrete cured by a single use of a conventional form resulted in serious deterioration of early strength development. However, other concretes cured by the proposed curing methods maintained the temperature of the concretes between 5 and 20℃, and thus resulted in no frost damage.

• 한국건축시공학회지
• /
• 제3권4호
• /
• pp.87-94
• /
• 2003

This study is to investigate the temperature hysteresis and development of compressive strength due to the curing conditions and to evaluate the optimum curing condition of test specimens showing the same development of strength to that of real structures in cold weather. The results of temperature curve with curing conditions in mock-up tests showed the trend of decrease plain concrete with insulation form, plain concrete with heating, concrete with accelerator for freeze protection, and control concrete in turn. The strength development of plain concrete of inside and outside of shelter showed the very slow strength gains due to early freezing, but that of concrete with accelerator for freeze protection showed the gradual increase of strength with time. From this, it is clear that accelerator for freeze protection has the effects of refusing the freezing temperature and accelerating the hardening under low temperature. Strength test results of small specimens embedded in members and located in insulation boxes at the site are similar to that of cores drilled from the members at the same ages, thus it is clear that these curing methods are effective for evaluating in-place concrete strength

• 콘크리트학회지
• /
• 제8권4호
• /
• pp.141-148
• /
• 1996

기존의 촉진양생 연구는 1960~1970년대에 주로 실행된 것으로, 전체 증기양생기간이 18시간 또는 24시간인 경우에 대하여 연구되었고, 상기 연구 결과는 수동식 항온항습조를 사용하였으므로 온도상승구배의 효과에 대하여 명확한 규명을 할 수 없다고 판단되었다. 따라서 국내 PC공장 여건에서 그 직접적인 적용이 불가능한 실정이다. 본 연구는 효과적인 콘크리트 촉진양생에 대한 기본 자료를 정립할 목적으로, 국내 PC 공장에서 사용하는 배합표를 근거로 시험공시체를 제작한 후, 각 해당 양생주기 조건을 변화시켜 가면서 실험하였다. 탈형시 및 수중양생 재령28일의 측정하고 비교 검토한 결과, 재령 28일 후 설계강도값을 초과하는 가장 효과적인 촉진양생조건, 본 실험조건 하에서 전양생시간은 커다란 영향을 미치지 않았으며, 온도상승구배는 $30^{circ}C/hr$ 이하로, 최고양생온도는 $82^{\circ}C$이하로 양생해야 하며, 또한 촉진양생 후 2차 양생으로 강도증진을 도모함이 촉진양생의 효과를 증대시킬 수 있다고 판단되었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1996년도 봄 학술발표회 논문집
• /
• pp.107-111
• /
• 1996

The testing specimens were made from the standard mix proportion according to those of domestic PC factories to establish a basic data for the Accelerated Curing Effect. The experimental tests were conducted according to the conditions of each sub-curing periods. By comparing the results of compression tests on de-molded and 28-day water-curing specimens, we find that the most effective curing condition to obtain more than the required design strength after 28 days of water curing may be as follwings; the presteaming period does not affect seriously and less than $30^{\circ}C$/hr-the rate of temperature rise and less than $82^{\circ}C$ - maximum temperature are necessary. It seems that post-curing procedure is very important factor to increase the effect of accelerated curing.

• 한국생산제조학회지
• /
• 제21권6호
• /
• pp.976-981
• /
• 2012

In this study, hardness, microstructure and temperature of glass transition are measured respectively by using SEM (Scanning electron microscope) and DSC (Differential scanning calorimeter) to analyze the effects on material properties by after-curing in the epoxy resin. As the result of hardness test according to the after-curing conditions, the higher the temperature of after-curing, hardness and heat resistance are, the higher hardness is. As a result of microstructure for each specimen by SEM, it could be confirmed that the specimen with after-curing has more dense fracture surface. It is also found that temperatures of glass transitions by DSC are comparatively higher in the specimens with after-curing, and the differences between after-curing conditions are negligible.

• 한국해양공학회지
• /
• 제15권2호
• /
• pp.124-129
• /
• 2001

The research on anticorrosive of valve for ship, waterworks, and drainage system is very important. The purpose of this paper is to develop the metal/polyurethan adhesive technique at insider of the value to prevent corrosion in the value. It is performed to the bending strength test by using metal /polyurethan in the metals (SB41, Al6061). It is investigated to the effects of bending strength on curing temperature, preheating time and curing time, and to the fracture mechanism of metal/polyurethan adhensived specimen. As a results, we find that the bending strength is the highest at curing temperature of 11$0^{\circ}C$ and the curing time is 60 minutes in metal/polyurethan adhesive specimen.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.785-788
• /
• 2006

This paper investigates the temperature history of slab mock-up specimens with various surface curing sheets, in order to determine a favorable surface curing method in hot weather condition. Test showed that insulating double bubble sheets+aluminum foil simultaneously on the upper section of a specimen prevented an increase of sudden temperature and a decrease of vaporization when placed during the hot weather condition. It also secured the high strength in early age. Therefore it is found that using the double bubble sheets+aluminum foil on concrete surface declined the plastic and drying shrinkage and inclined the early strength, thus improving the concrete quality.

• 한국식품과학회지
• /
• 제28권3호
• /
• pp.458-463
• /
• 1996

생강의 저장 전처리 효과를 보기 이ㅜ하여 충남 서산에서 수확한 햇생강을 wounding 처리후 온도조건 25, 30, $35^{\circ}C$및 습도조건 83%, 93% RH에서 $1{\sim}7$일간 curing시켜 실험실용 저장고($12^{\circ}C,$ 95% RH)에 보관하였다. 일정한 온 습도에서 curing 기간이 길수록 생강의 중량은 감소되었고, 온도 및 curing기간이 일정할 때 습도가 높을수록 중량감소는 작아졌다. Curing 기간동안 발아율은 $30^{\circ}C$, 90% RH이상의 조건에서 촉진되었으며, 곰팡이 발생은 전반적으로 나타났으나 특히 $35^{\circ}C$에서 curing기간이 길어질수록 상대적으로 진행이 빨랐다. 상처부위 표면의 경도는 93% RH일 경우가 83% RH보다 모든 온도조건에서 대체로 높은 경향을 보였으나, 전체적으로 볼 때 curing조건에 상관없이 일반적으로 높일 수 있었다. Curing 처리된 생간의 저장기간중(60일간) 수분의 손실로 인한 중량감소는 30일경 $2.0{\sim}8.2%,$ 60일경 $7.2{\sim}14.2%$의 범위를 보였다. 실험 결과들을 종합하여 screening하면 93%RH, $25^{\circ}C$에서 3일간의 curing이 저장기간중 품질변화를 최소화시킬 수 있는 것으로 나타났다.