• 한국식품과학회지
• /
• 제28권3호
• /
• pp.458-463
• /
• 1996

생강의 저장 전처리 효과를 보기 이ㅜ하여 충남 서산에서 수확한 햇생강을 wounding 처리후 온도조건 25, 30, $35^{\circ}C$및 습도조건 83%, 93% RH에서 $1{\sim}7$일간 curing시켜 실험실용 저장고($12^{\circ}C,$ 95% RH)에 보관하였다. 일정한 온 습도에서 curing 기간이 길수록 생강의 중량은 감소되었고, 온도 및 curing기간이 일정할 때 습도가 높을수록 중량감소는 작아졌다. Curing 기간동안 발아율은 $30^{\circ}C$, 90% RH이상의 조건에서 촉진되었으며, 곰팡이 발생은 전반적으로 나타났으나 특히 $35^{\circ}C$에서 curing기간이 길어질수록 상대적으로 진행이 빨랐다. 상처부위 표면의 경도는 93% RH일 경우가 83% RH보다 모든 온도조건에서 대체로 높은 경향을 보였으나, 전체적으로 볼 때 curing조건에 상관없이 일반적으로 높일 수 있었다. Curing 처리된 생간의 저장기간중(60일간) 수분의 손실로 인한 중량감소는 30일경 $2.0{\sim}8.2%,$ 60일경 $7.2{\sim}14.2%$의 범위를 보였다. 실험 결과들을 종합하여 screening하면 93%RH, $25^{\circ}C$에서 3일간의 curing이 저장기간중 품질변화를 최소화시킬 수 있는 것으로 나타났다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 춘계 학술논문 발표대회
• /
• pp.13-14
• /
• 2016

This study is aimed to analyze temperature history at each section of mat foundation concrete applying double bubble sheets. The results of the study are as follows. Firstly, the results of measuring the temperature history indicate that the lowest external temperature has been recorded at -5.6℃ for the three-day measurement period. For the central section, the result indicates that the lower, center and upper part have all secured the concrete curing temperature of 18℃ or higher. This results are believed to have resulted from excellent heat insulation performance of double bubble sheets. For the edge section between the edge form and the concrete interface, the temperature has been measured, on average, approximately 12℃ lower than the central section. However, all measured sections have indicated the temperature of 5℃ or higher. Meanwhile, an analysis has been conducted through the estimation equation of compressive strength of maturity during the curing period in order to examine the possibility of early frost damage and the aspect of securing strength. It has been confirmed that the compressive strength is higher than 50°D·D, namely, 5MPa, on the 3rd day of the aging process, which allows early frost damage to be avoided.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 추계 학술논문 발표대회
• /
• pp.83-84
• /
• 2018

As the concentration of greenhouse gases in the atmosphere increases, the reduction of CO2 is gaining worldwide attention. In the construction industry, cement replacement materials such as fly ash and blast furnace slag were investigated to reduce CO2 emissions in cement production process. Precast concrete is used in the field after manufacturing in the factory in the form of pipes and bricks because of shortening construction period and cutting construction cost. According to the results of previous research, it is known that early CO2 curing in concrete using OPC or fly ash has an initial strength enhancement effect and can be used for precast concrete production. Therefore, the purpose of this study is to evaluate the strength improvement effect by confirming the initial strength improvement effect when blast furnace slag is mixed.

• 한국연초학회지
• /
• 제21권1호
• /
• pp.10-16
• /
• 1999

Leaves harvested were separated with visual characters into 2 classes such as immature and mature leaves. In the curing process, the prolonged yellowing treatment during yellowing stage was automatically controlled at the different stalk position, and condition of curing process after this period was all the same with conventional ones. In case of prolonged yellowing in immature leaves, increase of price per kg reached to 8 % compared with those of conventional ones. In physical properties, filling capacity and shatter index was decreased with the degree of maturity, and it was equal level in filling capacity of immature leaves between curing method, while shatter index was decreased in prolonged yellowing treatment than that of conventional ones. There was no difference in chemical components between immature leaves of prolonged yellowing and conventional ones. As to the prolonged yellowing of immature leaves, there was decreased in citric and malic acid contents of the nonvolatile organic acids, and it was equal level in all higher fatty acids content of leaves cured by prolonged yellowing treatment compared with in that of conventional curing method. The contents of key compounds such as solanone, damascenone, damascone in the essential oil were lower in prolonged yellowing of immature leaves than those of mature leaves cured by conventional ones.

• 한국초지조사료학회지
• /
• 제13권3호
• /
• pp.228-233
• /
• 1993

Method for the sun curing dehydration of pig excreta by using vinyl house was described. We determined effects of the dehydrated pig excreta on the yields of whole crop corn and proximate chemical composition of whole crop corn. Pig excreta were dehydrated upto 15% of moisture content by the 3-4 days of sun curing dehydration in vinyl house in the summer period. There was no significant difference between the dehydrated pig excreta treatment and the chemical fertilizer treatment on dry matter(DM) content, DM yield and crude protein contents of whole crop corn. Ca and Mg contents by the dehydrated pig excreta treatment were lower than those by thechemical fertilizer treatment. In the contrast, K content by the dehydrated pig excreta treatment was higher than those by the chemical fertilizer treatment. and dehydrated pig excreta treatments were higher in K/Ca+Mg ratio than chemical fertilizer treatment. These results suggested the availability of the sun curing dehydration of pig excreta in vinyl house in small-scale animal industry. In addition, the dehydrated pig excreta treatment showen similar effects to the chemical fertilizer treatment on dry matter yields and contents of chemical composition of whole crop corn. These results suggest that using the sun curing dehydration of pig excreta could reduce the chemical fertilizer cost. However, we need more study to the relationship between the unbalanced mineral contents and animal health.

• Advances in concrete construction
• /
• 제5권4호
• /
• pp.313-330
• /
• 2017

Geopolymer is a sustainable concrete, replaces traditional cement concrete using alternative sustainable construction materials as binders and alkaline solution as alkaline activator. This paper presents the strength characteristics of geopolymer concrete (GPC) developed with fly ash and GGBS as binders, combined Sodium silicate ($Na_2SiO_3$) and Sodium Hydroxide (NaOH) solution as alkaline activators. The parameters considered in this research work are proportions of fly ash and GGBS (70-30 and 50-50), curing conditions (Outdoor curing and oven curing at $600^{\circ}C$ for 24 hours), two grades of concrete (GPC20 and GPC50). The mechanical properties such as compressive strength, split tensile strength and flexural strength along with durability characteristics were determined. For studying the durability characteristics of geopolymer concrete 5% $H_2SO_4$ solutions was used and the specimens were immersed up to an exposure period of 56 days. The main parameters considered in this study were Acid Mass Loss Factor (AMLF), Acid Strength Loss Factor (ASLF) and products of degradation. The results conclude that GPC with sufficient strength can be developed even under Outdoor curing using fly ash and GGBS combination i.e., without the need for any heat curing.

• 한국인쇄학회지
• /
• 제30권2호
• /
• pp.59-68
• /
• 2012

As one of the eletronic device industries has been developed by using a recent printing method, the consumption of Ag paste has been on the rise as well. The printing method has simple processes in comparison with other methods. Also it enables to be large-scaled and to lower price ranges. If UV curing system would be applied to the printing method, energy consumption and dangerousness from curing system can be minimized in a short period of time so that its method can be more eco-friendly. This study conducted an experiment in order to make UV curing Ag paste which is feasible to implement micro patterns with different dispersing agents. The purpose of the study is to analysis the suitable printability for micro pattern and to test dispersibility, hardening properties, conductivity and adhesive stength by measuring viscosity, TI(thixotropy index), G', G", $tan{\delta}$(G"/G') after making paste. We have experimented with four dispersing agents. After We did an analysis of characteristic of rheology, conductivity and adhesive stength, etc, We confirmed that the paste added FP 3060 has excellent dispersibility, conductivity and adhesive stength. If the paste has excellent dispersibility, we will expect that micro pattern is made by that.

• 한국축산식품학회지
• /
• 제43권4호
• /
• pp.580-593
• /
• 2023

The purpose of this study was to analyze whether seawater has positive effects on appearance characteristics, such as CIE a^*, and to determine the gas composition concentration that is suitable for maintaining it. Pork hind meat was cured with four types of curing agent for 5 d at 4℃. The different curing agents comprised the control salt, control nitrite pickling salt (CN), treatment brine, and treatment bittern (BT). The cured hams were cooked at 65℃ for 4 h and packaged at O₂:N₂ gas ratios of 7:3, 8:2, and 9:1 for 3 wk. The physicochemical properties were assessed immediately after heating the sample, and the color properties were measured after a 3 wk storage period. Based on the correlation results of the physicochemical properties, BT had a higher curing and cooking yield than the other treatments, owing to its high salinity. Results of color properties for BT (7:3) and CN (8:2) showed similar color CIE L^*, CIE a^* chroma, and hue angle values. Therefore, BT can be said to be a sous-vide curing agent suitable for preserving the color of ham, and a high nitrogen concentration of 30% helps to maintain the appearance of seawater sous-vide ham.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.783-788
• /
• 2001

Voids created with concrete construction or deterioration result in serious weakness from the aspects of both structural and durable function. Ultrasonic method using image processing technique was used for detecting pattern of voids in concrete in this study Experimental investigation was carried out for three types(patterns) of void in concrete. The effect of curing period of concrete and ultrasonic measurement method was also investigated. As a result it has been verified that the semi-direct measurement method is more effective than the other methods for detecting pattern of voids in concrete in ultrasonic method using image processing technique. The longer the curing period of concrete is, the better the detection accuracy of void pattern can be obtained.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.143-148
• /
• 2002

Recently, to consider economical and constructive aspect, Usage of Admixture, like Blast-Furnace Slag and Fly-Ash, are increased. Blast-Furnace Slag, a by-product of steel industry, have many advantage, to reduce the heat of hydration, increase in ultimate strength and etc. But it also reduces early-age strength, it is prevented from using of Blast-Furnace Slag at cold-weather-concrete. In this study, for the purpose of increasing usage of Blast-Furnace Slag at cold-weather-concrete, it is investigated the strength properties of concrete subjected to time and period of frost damage for early age curing. According to this study, if early age curing is carried out before having frost damage, the strength of concrete, subjected to frost damage, is recovered. And that properties is not connected with the frost cause.