• 대한한의학회지
• /
• 제18권2호
• /
• pp.340-354
• /
• 1997

Background : The stenosis of the coronary artery results in a decrease in the myocardial oxygen supply, ischemia and infarction. Jakamchotang as a drug of liquid is generally regarded to have the effect of arrythmia, palpitation from Heart disease and promoting the flow of Ki and Blood. Methods : The purpose of this experimental study is to find whether Jakamchotang is effective or not in curing ischemia in isolated perfused rat hearts and to measure the degree of its curing effect. In this study, under the Langendorff apparatus, ischemia was induced in isolated Sprague-Dawley rat hearts by ceasing the perfusion for 20 minites. Subjects were divided into a normal saline orally administered group(control group), an Jakamchotang orally 100mg administered group (sample A), an Jakamchotang orally 300mg administered group (sample B), and an Jakamchotang injection perfused group(sample C). The heart rates, left ventricular pressure, myocardial dilatation/contraction, cardiac perfusion flow and cardiac ezyme(LDH, CPK) of the four group were measured and compared in order to assess the influence of Jakamchotang on isolated perfused rat hearts recovering abillity from ischemia and infarction. results : 1. Heart rates were increased significantly in Jakamchotang orally 100mg administered group, Jakamchotang orally 300mg administered group and Jakamchotang injection perfused group on perfusion and reperfusion(p<0.01). 2. Left ventricular pressure were increased significantly in Jakamchotang orally 100mg administered group and 300mg administered and Jakamchotang injection perfused group(p<0.01) in comparison with control group on perfusion, but every group did not significant on reperfusion. 3. While there were no differances in each group's abillities of myocardial dilatation, the ability of myocardial constriction of Jakamchotang 100mg administered group only on perfusion was significantly greater than that of control group(p<0.05). 4. CBF was no significant on perfusion and reperfusion in comparison with control group(N.S.) 5. LDH was not significantly decreased on perfusion, but significactly decreased in Jakamchotang orally 100mg administered group, Jakamchotang orally 300mg administered group on reperfusion. 6. CPK was significantly decreased in Jakamchotang orally 100mg administered group, 300mg administered and Jakamchotang injection perfused group on perfusion(p<0.01), but was not significantly in Jakamchotang 300mg administered group only on reperfusion(P<0.05) Conclusion : According to the result above, Jakamchotang have an effect to recover in the isolated perfused rat hearts. Especially, the effect of Jakamchotang in orally adminstered group is greater than that of Jakamchotang injection perfused group on preischemia. The followings are the two important results of this study: First, the effect of Jakamchotang used traditionally on heart disease was proved statistcally under the Langendorff apparatus. Second, on the basis of this study, the effect of other type medications on myocardial ischemia can be evaluted in further studies.

• Geomechanics and Engineering
• /
• 제24권2호
• /
• pp.115-127
• /
• 2021

This paper investigates the effects of soaking on a lime stabilized high plasticity clay and evaluates the implications for pavement design. In this context, the soil was stabilized by 4%, 6% and 9% hydrated lime. The soil was pulverized in two different gradations so that representative field gradations could be simulated. Both soil pulverization levels passed the relevant field gradation criteria. Curing durations were chosen as 7 days, 28 days and 56 days. Two groups of samples were prepared and were tested in unconfined compression test apparatus to measure the strength and secant modulus at failure values. One of the groups was tested immediately after curing. The other group of samples were first cured and then subjected to soaking for ten days before testing. Visual observations were made on the samples during the soaking period. The results showed the superiority of fine soil pulverization over coarse soil pulverization for unsoaked conditions in terms of strength and modulus values. Soaking of the samples affected the unconfined compressive strength and modulus values based on lime content, curing duration and soil pulverization level. In soaked samples, fine soil pulverization resulted in higher strength and modulus values compared to coarse soil pulverization. However, even with fine soil pulverization, effects of soaking on modulus values were more significant. A new term named as "Soaking Influence Factor (SIF)" was defined to compare the reduction in strength and modulus due to soaking. The data was compared with the relevant design guidelines and an attempt was made to include Soaking Influence Factors for strength and modulus (SIFS and SIFM) into pavement design processes. Two equations which correlated secant modulus at failure to unconfined compressive strength were proposed based on the samples subjected to soaking. The results of this study showed that in order to decrease the diverse effects of soaking for lime stabilized soils, soil pulverization level should be kept as fine as possible in the field. Importance of proper drainage precautions in the pavements is highlighted for better performance of the pavements.

• 한국정밀공학회지
• /
• 제28권8호
• /
• pp.1000-1007
• /
• 2011

For enlarging the applications of microstereolithography, the use of diverse materials is required. In this study, the material switching system (MSS) for projection microstereolithography apparatus is proposed. The MSS consists of three part; resin level control, resin dispensing control, and vat level control. Curing characteristic of materials used in fabrication has been identified. Through repeated fabrication of test models, the critical fabrication error is investigated and a possible solution to this error is suggested. The developed system can be applied to improve the strength of microstructure and extended to fabricate an array of microstructures with multiple materials.

• 대한심미치과학회지
• /
• 제27권2호
• /
• pp.82-96
• /
• 2018

3D 프린팅은 삼차원 이미지 정보를 이용하여 레이어로 분할한 후 선택한 소재를 적층하여 가공하는 방법을 말한다. 소재를 적층하는 방법에 따라 다양한 종류의 3D 프린팅이 존재하는데 최근 치과분야에서는 SLA방식과 DLP방식으로 광원을 이용한 경화를 통해 적층 가공하는 3D 프린팅이 널리 보급되어 사용되고 있다. 전악 범위의 3D프린팅 치과용 모델은 전통적인 인상 채득으로 제작된 스톤모델보다는 다소 정확성이 부족한 것으로 보고되었으나, 같은 STL파일을 이용하여 4분악 범위를 3D 프린팅한 모델은 밀링 방법으로 가공한 모델보다 정확하였다. 디자인 소프트웨어의 활용도에 따라 보철치료의 진단, 임시 보철물의 제작, 의치의 제작이 가능하였다. 교정에서는 투명 교정 모델과 브라켓 간접 부착을 위한 트레이 제작이 가능하였다. 임플란트 수술에 있어서 CT를 기반으로 한 정확한 위치에 임플란트를 식립하는 가이드 제작에 활용하고 있다. 출력 방식의 발전으로 인하여 3D 프린터의 출력시간이 계속적으로 단축되고 있으며, 이로 인해 치과 진료실 내에서 3D 프린터가 기존의 전통적인 가공 방법을 대체할 수 있을 것으로 기대한다.