• 제목/요약/키워드: Cupper

검색결과 59건 처리시간 0.03초

팔당호 연안대 초지생태계에서 낙엽 구성성분의 유실률 VI. Cu, Fe 및 Zn (The Removal Rates of the Constituents of Litters in the Littoral Grassland Ecosystems in the Lake Paldangho VI. Cu, Fe and Zn)

  • 윤신선;이인숙;장남기
    • 아시안잔디학회지
    • /
    • 제10권4호
    • /
    • pp.297-304
    • /
    • 1996
  • The investigation was performed to reveal the removal rate of metal constituents of litters in a Phragmites communis Miseanthus sacchariflorus, Typha angastata and Seirpas tabernaemontani grasslands in the lake Paldangho. The removal rates of metal constituents are determined by the mathematical models. The removal rates and time required to decay up to a percentage of each metal constituent were calculated using these model. The removal rates of Cu, Fe and Zn were 0.61, 0.58 and 0.79 in Phragmites communis 0.39, 0.47 and 0.68 in Miseanthus saccharflorus; 0.26, 0.09 and 0.23 in Typha angustata: 0.56, 0.27 and 0.67 in Seirpus tabernaemontani respectively. The periods required to reach half time to the stedy state of the removal and accumulation for Cu, Fe and Zn were 1,13,1.19 and 0.79 years in Phragmites communis; 1.79, 1.49 and 1.02 years in Miscanthus sacchariflorus; 2.70, 7.43 and 2.96 years in Typha angustata ; 1.23, 2.58 and 1.04 years in Scirqus tabernaemontani, re-spectively. Key words: Phragmites communis, Miscanthus sacchariflorus, Typha angustata and Scirpus tabernaemontani, lake Paldangho, Removal rate, Cupper, Iron, Zinc.

  • PDF

전류변화에 따른 Over Cut에 관한 실험적 연구

  • 신근하
    • 한국공작기계학회:학술대회논문집
    • /
    • 한국공작기계학회 1996년도 추계학술대회 논문
    • /
    • pp.58-63
    • /
    • 1996
  • A study is drawn up its result's tables and graphs by measuring tools(outside micrometer cylinder gauge and dial caliper gauge) on the difference of diameter volumes from before-discharge and after-discharge under 52 Kind's experimental condition by cupper and graphite electrode of CNC EDM. The EDM is attached with A.V.R. and memory scope for keep up accuracy and the fixed table of work piece is used in order to eliminate the noise by the internal resistance of it and forcing to eradicate the discharge liquid. It is analyzed cutting conditions to compare its wave value and pulse time.(Ton Toff) through voltage and current for decreasing working error.

  • PDF

품질에 의한 커피 원두의 분류

  • 김종욱
    • 식품문화 한맛한얼
    • /
    • 제1권4호
    • /
    • pp.93-96
    • /
    • 2008
  • 커피원두의 품질평가는 커피가 생산되는 나라마다 규격이 다르고 매우 다양한 원두가 생산되고 있어 오랜 기간 동안 숙련을 거친 사람만이 할 수 있는 작업이다. 원두의 품질을 제대로 평가할 능력이 없을 경우 저가의 원두를 고가를 지불하고 구매하는 경우도 발생하며 일정한 품질의 원두를 구매할 수 없어 균일한 품질의 제품을 생산할 수 없게 되므로, 커피 제조업체에서는 원두 품질평가자가 매우 중요한 역할을 담당하게 된다. 커피가 재배되는 산지에서는 커퍼(Cupper)라고 불리는 품질평가자들이 엄청난 양의 품질을 평가하고 가격을 결정하는 일을 담당하고 있다.

  • PDF

생강 근경부패병의 약제방제 (Chemical Control of Rhizome Rot of Ginger by Seed-Rhizome and Soil Treetment)

  • 최재을
    • 농업과학연구
    • /
    • 제26권1호
    • /
    • pp.1-5
    • /
    • 1999
  • 본 시험은 생강의 안정적 재배에 위험을 주고 있는 생강근경부패병의 방제법을 개발하기 위하여 실시하였다. 근경부패병은 종자소독만으로 충분한 방제가 곤란하였다. 그러나 다조멧으로 토양소독을 하고 메타실 입제로 토양처리한 결과 무처리에 비하여 생장을 촉진시켰으며 95.5%의 방제가로 본 병의 방제에 매우 효과적이고 수량도 무처리에 비하여 39%의 증수효과를 갖어왔다. 메타실동수화제와 스트레토마이신을 혼합하여 3회 관주처리한 결과 87.1%의 방제효과가 있어 토양 소독보다는 방제효과가 낮았으나 근경부패병의 방제에 효과적이었다.

  • PDF

Neurotoxicant (fenitrothion) alters superoxide dismutase, catalase, and peroxidase activities in Chironomus riparius Mg. (Diptera, Chironomidae) larvae

  • Park, Jin-Hee
    • 한국환경성돌연변이발암원학회지
    • /
    • 제21권2호
    • /
    • pp.67-71
    • /
    • 2001
  • Effects of exposure to a neurotoxicant, fenitrothion on antioxidant enzyme activities in Chironomus riparius Mg. (Diptera, Chironomidae) larvae were evaluated under laboratory conditions. Exposure to this chemical led to an increase of cupper, zinc type superoxide dismutase and manganese type superoxide dismutase activities and to a decrease of glutathion peroxidase activity. An activation of catalase was observed in the larvae exposed to high fenitrothion concentration. The response of superoxide dismutase was rapid and sensitive to low chemical concentrations, but changes in catalase, total peroxidase and glutathion peroxidase were less sensitive. In this study, antioxidant enzyme activities in Chironomus riparius larvae were identified as pertinent biomarkers for environmental monitoring.

  • PDF

PID 제어기에 의한 소형 로봇용 그리퍼의 힘 제어 (PID Force Control of a miniature robot Gripper)

  • 홍동표
    • 한국생산제조학회지
    • /
    • 제8권2호
    • /
    • pp.44-49
    • /
    • 1999
  • This paper is concerned with the theoretical and experimental study on the force conrtrol of a miniature robotic gripper. The gripper is an uniform flexible cantilever equipped with a distributed set of compact force sensor. As an actuator piezoelectric acturator, piezoelectric acturator is fixed with cupper plate at which the beam is clamped. The mathematical model of the assembled electro-mechaincal system is developed. The force sensor is described by a set of concentrated mass-spring system. The formulated equations of motion are applied to he study of a control problem where the gripper is commanded to grip an object The usefulness of the PID control technique is verified by experiment.

  • PDF

수종 유황환원균주의 분리, 동정 및 그의 생리적 특성에 대하여 (Isolation Identification and Physiological Characteristics of Some Sulfur-Reducing Microbes)

  • 이민재;오명수
    • 미생물학회지
    • /
    • 제10권4호
    • /
    • pp.175-190
    • /
    • 1972
  • This work was designed to illustrate physiological effects on the elimination of sulfur and its compounds in petroleum using sulfur-reducing bacteria. Deulfurizing bacteria were collected from sewage and soil at several areas in Soul and Ulsan, Korea. Seven supecies of sulfur-reducing microbes isolated were identified as : Pseudomonas marginata, Ps.effusa, Ps. putrefaciens, Ps.pseudcmcnelli, Ps. xanthochlora, Ps.bowlesiae, and Ps.aeruginosa. And some experiments were performed to define the growing characteristics of the Pseudomonads and the results obtained are as follows : 1) Shaking culture method was more effective for the growth of the cells than stagnant culture. 2) Beef peptone medium was better for the growth than other media. 3) Cuprous chloride of 50 ppm and cupper sulfate of 300 ppm treated, respectively, in the medium were effective for the growth. 4) Benzene of toluene of 5,000 ppm and petroleum ether of 50,000 ppm did not show remarkable inhibitory effects on the growth.

  • PDF

경면가공용 고정밀 CNC 선반 개발 (Development of a high precision CNC lathe for mirror surface machining)

  • 박청홍;이후상;신영재;이군석;김춘배
    • 한국정밀공학회지
    • /
    • 제14권3호
    • /
    • pp.82-88
    • /
    • 1997
  • In this paper, the development of a precision CNC lathe prototype for mirror surface machining is presented. To obtain high precision machining accuracy, a hydrostatically supported precision spindle and a sliding guideway with turcite pad are adopted as the motion elements. The machining accuracy of the prototype machine, and the motional accuracy of its motion elements are tested and evaluated to confirm the validity of the application of these elements on the prototype. The hydrostatic spindle shows 0.09 .mu. m of rotational accuracy and the guideway shows about 0.8 .mu. m/170mm of horizontal straightness. The sur- face roughness of cupper and aluminium cylinder machined by the prototype machine with diamond tool are 0.07 .mu. m and 0.10 .mu. m Rmax respectively. From these results, it is verified that the prototype lathe is avail- able for high precision machining.

  • PDF