• Applied Chemistry for Engineering
• /
• v.3 no.4
• /
• pp.663-669
• /
• 1992

Chromium oxide/zirconia catalysts were prepared by dry impregnation of $Zr(OH)_4$ powder with aqueous solution of $(NH_4)_2CrO_4$ followed by calcining in air. The redox behavior of prepared catalysts were investigated by reacting cumene as test material over catalysts. As a result it was found that $Cr^{6+}$ species(as chromate) on the surface of catalyst was responsible for the formation of strong acid site and the catalytic activity for the dealkylation of cumene. However, much of the $Cr^{6+}$ species was reduced to $Cr^{3+}$ species by $H_2$ formed during the catalytic reaction of cumene and the reduced $Cr^{3+}$ species was an active site for dehydrogenation of cumene to form ${\alpha}$-methyl styrene. The reduced $Cr^{3+}$ species was also reoxidized to a $Cr^{6+}$ species after treatment with $O_2$ and consequently the deoxidized catalyst exhibited catalytic activity for the dealkylation reaction of cumene.

• Applied Chemistry for Engineering
• /
• v.1 no.1
• /
• pp.35-43
• /
• 1990

A series of $TiO_2-SiO_2$catalysts were prepared by coprecipitation from the mixed solution of titanium tetrachloride and sodium silicate. Some of the samples were treated with 1N $H_2SO_4$ and used as modified catalysts. The catalytic activities of modified catalysts were higher than those of unmodified catalysts, and the effect of modification on the catalytic activity was higher for 2 - propanol dehydration than for cumene dealkylation. The catalytic activity of unmodified catalysts was correlated with their acid amount for the above two reactions. As $TiO_2-SiO_2$ catalysts had relatively large amount of weak acid sites and small amount of strong acid sites, the catalytic activity for 2 - propanol dehydration was higher than that for cumene dealkylation. The effect of modification on catalytic activity increased with increasing $TiO_2$content of the catalysts. Actually, $92-TiO_2-SiO_2/SO_4{^2}$had the highest increment in catalytic activity and $10-TiO_2-SiO_2/SO_4{^2}$had the lowest increment for the 2 - propanol dehydration.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.12
• /
• pp.1309-1315
• /
• 2001

Zirconium sulfate supported on zirconia catalysts were prepared by impregnation of powdered $Zr(OH)_4$ with zirconium sulfate aqueous solution followed by calcining in air at high temperature. The characterization of prepared catalysts was performed using Fourier transform infrared (FTIR), X-ray diffraction (XRD), differential scanning calorimetry (DSC), and by the measurement of surface area. The addition of zirconium sulfate to zirconia increased the phase transition temperature of $ZrO_2$ from amorphous to tetragonal due to the interaction between zirconium sulfate and zirconia, and the specific surface area and acidity of catalysts increased in proportion to the zirconium sulfate content up to 10 wt% of $Zr(SO_4)_2$. Infrared spectra of ammonia adsorbed on $Zr(SO_4)2}ZrO_2$ showed the presence of Bronsted and Lewis acid sites on the surface. $10-Zr(SO_4)_2}ZrO_2$ calcined at $600^{\circ}C$ exhibited maximum catalytic activities for 2-propanol dehydration and cumene dealkylation. The catalytic activities for both reactions were correlated with the acidity of catalysts measured by ammonia chemisorption method.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.2
• /
• pp.159-160
• /
• 2003

• Applied Chemistry for Engineering
• /
• v.7 no.2
• /
• pp.245-251
• /
• 1996

A series of $BeO-SiO_2$ catalysts were prepared by coprecipitation from the mixed solution of berylium chloride and sodium silicate. The addition of BeO to $SiO_2$ caused the increased of acidity, acid strength, specific surface area, and acid catalytic activity, giving a maximum at 20 mol% of BeO. On the basis of x-ray diffraction pattern, the catalysts calcined at $400{\sim}500^{\circ}C$ were found to be amorphous, having both $Br{\ddot{o}}nsted$ and Lewis acid sites. Catalytic activities for cumene dealkylation were closely correlated with the acidity of catalysts.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.5
• /
• pp.657-664
• /
• 2004

Titanium sulfate supported on $TiO_2$was prepared by impregnation of powdered $TiO_2$with an aqueous solution of titanium sulfate followed by calcining in air at high temperature. For Ti$(SO_4)_2/TiO_2$ samples calcined at 300 $^{\circ}C$, no diffraction lines of titanium sulfate are observed at $Ti(SO_4)_2$loading up to 30 wt%, indicating good dispersion of $Ti(SO_4)_2$ on the surface of $TiO_2$. The acidity of the catalysts increased in proportion to the titanium sulfate content up to 20 wt% of $Ti(SO_4)_2$. 20 wt% $Ti(SO_4)_2/TiO_2$ calcined at 300 $^{\circ}C$ exhibited maximum catalytic activities for 2-propanol dehydration and cumene dealkylation. The catalytic activities for these reactions, were correlated with the acidity of catalysts measured by ammonia chemisorption method.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.12
• /
• pp.1785-1792
• /
• 2003

Zirconia modified with $MoO_3$ was prepared by impregnation of powdered $Zr(OH)_4$ with ammonium heptamolybdate aqueous solution followed by calcining in air at high temperature. Spectroscopic studies on prepared catalysts were performed by using FTIR, Raman, XRD, and DSC and by measuring surface area. Upon the addition of molybdenum oxide to zirconia up to 15 wt%, the specific surface area increased in proportion to the molybdate oxide content, while acidity measured by irreversible chemisorption of ammonia exhibited a maximum value at 3 wt% of $MoO_3$. Since the $ZrO_2$ stabilizes the molybdenum oxide species, for the samples equal to or less than 30 wt%, molybdenum oxide was well dispersed on the surface of zirconia and no phase of crystalline $MoO_3$ was observed at any calcination temperature above $400^{\circ}C$. The catalytic activities for cumene dealkylation were roughly correlated with the acidity of catalysts measured by ammonia chemisorption method, while the catalytic activities for 2-propanol dehydration were not correlated with the acidity because weak acid sites are necessary for the reaction.

• Bulletin of the Korean Chemical Society
• /
• v.11 no.5
• /
• pp.403-406
• /
• 1990

Two types of new silica catalysts modified with benzenesulfonic acid derivatives were prepared by esterification or phenylation followed by sulfonation. Both catalysts thus prepared were tested as acid catalysts for 2-propanol dehydration and cumene dealkylation reactions. B catalyst () were more active than A catalyst (). Highter catalytic activity for B catalyst may be accounted for by higher resistance to water, higher acid strength, more acidity, and better thermal stability as compared with A catalyst.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.6
• /
• pp.821-829
• /
• 2006

A series of catalysts, $NiO/La_2O_3-ZrO_2/WO_3$, for acid catalysis was prepared by the precipitation and impregnation methods. For the $NiO/La_2O_3-ZrO_2/WO_3$ samples, no diffraction lines of nickel oxide were observed, indicating good dispersion of nickel oxide on the catalyst surface. The catalyst was amorphous to X-ray diffraction up to 300 ${^{\circ}C}$ of calcination temperature, but the tetragonal phase of $ZrO_2$ and monoclinic phase of $WO_3$ by the calcination temperatures from 400 ${^{\circ}C}$ to 700 ${^{\circ}C}$ were observed. The role of $La_2O_3$ in the catalyst was to form a thermally stable solid solution with zirconia and consequently to give high surface area and acidity. The high acid strength and high acidity were responsible for the W=O bond nature of complex formed by the modification of $ZrO_2$ with $WO_3$. For 2-propanol dehydration the catalyst calcined at 400 ${^{\circ}C}$ exhibited the highest catalytic activity, while for cumene dealkylation the catalyst calcined at 600 ${^{\circ}C}$ showed the highest catalytic activity. 25-$NiO/5-La_2O_3-ZrO_2/15-WO_3$ exhibited maximum catalytic activities for two reactions due to the effects of $WO_3$ modifying and $La_2O_3$ doping.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.8
• /
• pp.1265-1272
• /
• 2007

A solid acid catalyst, NiSO4/CeO2-ZrO2 was prepared simply by promoting ZrO2 with CeO2 and supporting nickel sulfate on CeO2-ZrO2. The support of NiSO4 on ZrO2 shifted the phase transition of ZrO2 from amorphous to tetragonal to higher temperatures because of the interaction between NiSO4 and ZrO2. The surface area of 10-NiSO4/1-CeO2-ZrO2 promoted with CeO2 and calcined at 600 oC was very high (83 m2/g) compared to that of unpromoted 10-NiSO4/ZrO2 (45 m2/g). This high surface area of 10-NiSO4/1-CeO2-ZrO2 was due to the promoting effect of CeO2 which makes zirconia a stable tetragonal phase as confirmed by XRD. The role of CeO2 was to form a thermally stable solid solution with zirconia and consequently to give high surface area and acidity of the sample, and high thermal stability of the surface sulfate species. 10-NiSO4/1- CeO2-ZrO2 containing 1 mol% CeO2 and 10 wt% NiSO4, and calcined at 600 oC exhibited maximum catalytic activities for both reactions, 2-propanol dehydration and cumene dealkylation.