• Radiation Oncology Journal
• /
• v.21 no.1
• /
• pp.75-81
• /
• 2003

Purpose : This study quantitatively evaluated the apoptosis In human peripheral blood lymphocytes using flow cytometry, and investigated the possibility of using this method, with a small amount of blood, and the time and dose dependence of radiation-induced apoptosls. Materials and Methods : Peripheral blood lymphocyes were isolated from the heparinized venous blood of 11 healthy volunteers, 8 men and 3 women, with each 10 ml of blood being divided Into IS samples. The blood lymphocytes were Irradiated using a linear accelerator at a dose rate of 2.4 Gy/min, to deliver doses of 0.5, 1, 2 and S Gy. The control samples, and Irradiated cells, were maintained in culture medium for 24, 48 and 72 hours fellowing the Irradiation. The number of apoptotic cells after the in vitro X-irradiation was measured by flow cytometry after Incubation periods of 24, 48 and 72 hours. We also observed the apoptotic cells using a DNA fragmentation assay and electron microscopy. Results : The rate oi spontaneous apoptosis increased in relation to the time interval following irradiation (1.761 ${\pm}$0.161, 3.563${\pm}$0.554, 11.098${\pm}$2.849, at 24, 48, and 72 hours). The apoptotli cells also increased In the samples irradiated with 0.5, 1, 2 and 5 Gy, In a radiation dose and time interval after Irradiation manner, with the apoptosls being too great at 72 hours after Irradiation. The dose-response curves were characterized by an Initial steep Increase In the number of apoptotic cells for Irradiation doses below 2 Gy, with a flattening of the curves as the dose approached towards 5 Gy. Conclusion :The flow cytometric assay technique yielded adequate data, and required less than 1 mL of blood. The time and dose dependence of the radiation-induced apoptosis, was also shown. It is suggested that the adequate time Interval required for the evaluation of apoptosis would be 24 to 48 hours after blood sampling.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.31 no.4
• /
• pp.281-286
• /
• 2009

Introduction: Enamel matrix derivative (EMD) is a protein which is secreted by Hertwig root sheath and plays a major role in the formation of cementum and attachment of peridontium. Several studies have shown that EMD promoted the proliferation and differentiation of preosteoblasts, osteoblasts and periodontal ligament cells in vitro: however, reports showing the inhibition of osteogenic differentiation by EMD also existed. This study was designed to simultaneously evaluate the effect of EMD on the two cell lines (human mesenchymal stem cells: hMSC, human periodontal ligament derived fibroblasts: hPDLCs) by means of quantitative analysis of some bone related matrices (Alkaline phosphatase : ALP, osteopontin ; OPN, osteocalcin ; OC). Materials and Methods: hMSCs and hPDLCs were expanded and cells in the 4${\sim}$6 passages were adopted to use. hMSc and hPDLCs were cultured during 1,2,7, and 14 days with 0, 50 and 100 ${\mu}g/ml$ of EMD, respectively. ALP activity was assessed by SensoLyte ALP kit and expressed as values of the relative optical density. Among the matrix proteins of the bony tissue, OC and OPN were assessed and quantification of these proteins was evaluated by means of human OC immunoassay kit and human OPN assay kit, respectively. Results: ALP activity maintained without EMD at $1,2^{nd}$ day. The activity increased at $7^{th}$ day but decreased at $14^{th}$ day. EMD increased the activity at $14^{th}$ day in the hPDLCs culture. In the hMSCs, rapid decrease was noted in $7^{th}$ and $14^{th}$ days without regard to EMD concentrations. Regarding the OPN synthesis in hPDLCs, marked decrease of OPN was noted after EMD application. Gradual decrease tendency of OPN was shown over time. In hMSCs, marked decrease of OPN was also noted after EMD application. Overall concentration of OPN was relatively consistent over time than that in hPDLCs. Regarding the OC synthesis, in both of hPDLCs and hMSCs, inhibition of OC formation was noted after EMD application in the early stages but EMD exerted minimal effect at the later stages. Conclusion: In this experimental condition, EMD seemed to play an inhibitory role during the differentiation of hMSCs and hPDLCs in the context of OC and OPN formation. In the periodontium, there are many kinds of cells contributing to the regeneration of oral tissue. EMD enhanced ALP activity in hPDLCs rather than in hMSCs and this may imply that EMD has a positive effect on the differentiation of cementoblasts compared with the effect on hMSCs. The result of our research was consistent with recent studies in which the authors showed the inhibitory effect of EMD in terms of the differentiation of mineral colony forming cells in vitro. This in vitro study may not stand for all the charateristics of EMD; thus, further studies involving many other bone matrices and cellular attachment will be necessary.

• Journal of Periodontal and Implant Science
• /
• v.31 no.1
• /
• pp.1-23
• /
• 2001

Chitosan is biodegradable natural polymer that has been demonstrated its ability to improve wound healing, and calcium metaphosphate(CMP) is a unique class of phosphate minerals having a polymeric structure. In this study, chitosan/CMP and platelet derived growth factor(PDGF-BB) loaded chitosan/CMP sponges were developed, and the effect of the sponges on bone regeneration and their possibility as scaffolds for bone formation by three-dimensional osteoblast culture were examined. PDGF-BB loaded chitosan/CMP sponges were prepared by freeze-drying of a mixture of chitosan solution and CMP powder, and soaking in a PDGF-BB solution. Fabricated sponge retained its 3-dimensional porous structure with $100-200\;{\mu}m$ pores. The release kinetics of PDGF-BB loaded onto the sponge were measured in vitro with $^{125}I-labeled$ PDGF-BB. In order to examine their possibility as scaffolds for bone formation, fetal rat calvarial osteoblastic cells were isolated, cultured, and seeded into the sponges. The cell-sponge constructs were cultured for 28 days. Cell proliferation, alkaline phosphatase activity were measured at 1, 7, 14 and 28 days, and histologic examination was performed. In order to examine the effect on the healing of bone defect, the sponges were implanted into rat calvarial defects. Rats were sacrificed 2 and 4 weeks after implantation and histologic and histomorphometrical examination were performed. An effective therapeutic concentration of PDGF-BB following a high initial burst release was maintained throughout the examination period. PDGF-BB loaded chitosan/CMP sponges supported the proliferation of seeded osteoblastic cells as well as their differentiation as indicated by high alkaline phosphatase activities. Histologic findings indicated that seeded osteoblastic cells well attached to sponge matrices and proliferated in a multi-layer fashion. In the experiments of implantation in rat calvarial defects, histologic and histomorphometric examination revealed that chitosan/CMP sponge promoted osseous healing as compared to controls. PDGF-BB loaded chitosan/CMP sponge further echanced bone regeneration. These results suggested that PDGF-BB loaded chitosan/CMP sponge was a feasable scaffolding material to grow osteoblast in a three-dimentional structure for transplantation into a site for bone regeneration.

• Tuberculosis and Respiratory Diseases
• /
• v.55 no.2
• /
• pp.154-164
• /
• 2003

Background : Until the early 1990's in Korea, treatment outcomes of patients with pulmonary tuberculosis in the private sector were reported to be inferior to those of the public health center under the National Tuberculosis Programme. The purpose of this study was to analyze the clinical characteristics and the treatment efficacy of the patients with pulmonary tuberculosis recently diagnosed at a private general hospital. Materials and Methods : The study included all pulmonary tuberculosis patients diagnosed at Samsung Medical Center and notified to the public health center from August 2000 to January 2001. Results : Of the 232 patients included in the study during a 6-month period, 188 were (81.0%) initial treatment cases and 44 (19.0%) were re-treatment cases. Eighty-three (35.8%) patients had smear-positive sputa, and 27 (11.6%) had smear-negative, culture-positive sputa. Initial sputum examinations were not performed in 47 (20.3%) patients. A six-month, short-course treatment using isoniazid, rifampin, ethambutol and pyrazinamide was prescribed for 31.4% of the patients under the initial treatment. The success rate (cured plus treatment completed) of the initial treatment for the smear-positive patients was 69.1%. Eleven (13.3%) of the 83 patients with smear-positive pulmonary tuberculosis discontinued their treatment without notice. Conclusions : To improve the treatment efficacy and decrease the default rates of the patients with pulmonary tuberculosis in the private sector, further efforts are required in line with the Korean Academy of Tuberculosis and Respiratory Disease Treatment Guidelines and in the implementation of an appropriate model of public-private mix for tuberculosis control in Korea.

• The Journal of Korean Academy of Prosthodontics
• /
• v.52 no.3
• /
• pp.211-221
• /
• 2014

Purpose: The purpose of this study was to evaluate the surface characteristics and response of osteoblast-like cell at SLA surface treated with NaOH. Materials and methods: Three kinds of specimens were fabricated for the experiment groups. Control group was a machined surface, SLA group was a conventionally SLA treated surface, and SLA/NaOH gorup was SLA surface treated with NaOH. To evaluate the surface characteristics, the surface elemental composition (XPS), surface roughness and surface contact angle were evaluated in each group. And the cytotoxicity, cell adhesion, cell proliferation and ATP activity of osteoblast-like cells (MG-63 cells) were compared in each group for evaluatation of the cell responses. Statistical comparisons between groups were carried out via one-way ANOVA using the SPSS software (SPSS Inc., Chicago, USA), and then performed multiple comparisons. The differences were considered statistically significant at P<.05. Results: SLA surface treated with NaOH (SLA / NaOH group) was changed to hydrophilic surface. All groups did not show the cytotoxicity to the MG-63. In cell adhesion studies, SLA / NaOH group showed the higher degree of adhesion than anothers (P<.05), Up to 7 days of incubation, the proliferation was showed the increasing tendency in all groups but SLA / NaOH group showed the highest cell proliferation between the three groups (P<.05). At 7 days of incubation, there was no difference in ALP activities between the three groups, but at 14 days, SLA / NaOH group showed significant increase in ALP activities (P<.05). Conclusion: In this study, SLA surface treated with NaOH promoted cell adhesion, proliferation and differentiation. It means that SLA/NaOH group is possible to promote osseointegration of implants.

• Tuberculosis and Respiratory Diseases
• /
• v.55 no.1
• /
• pp.31-40
• /
• 2003

Background : A CT scan is a useful modality for the diagnosis and evaluation of disease activity in patients with pulmonary tuberculosis. However, the CT diagnosis of pulmonary tuberculosis is sometimes difficult in patients with an atypical CT pattern, especially with lobar consolidation mimicking pneumonia. The aim of this study was to evaluate the clinical and CT features of pulmonary tuberculosis, simulating pneumonia, from a CT scan. Materials and Methods : The clinical and CT features in 21 patients, where the CT diagnosis was pneumonia, or the CT differential diagnosis included pneumonia, were retrospectively analyzed. Results : Of the 21 patients, 6 were immunocompromised, 15 presented with fever or leukocytosis and 15 showed positive sputum smear test for acid fast bacilli. Also, 17 of the 21 patients showed a positive sputum culture test. On the CT scan, consolidation was noted in all patients (100%), volume loss of the involved lobe or segment in 12 (57%), bronchogenic spread in 15 (71%), a cavity in 7 (33%) and bronchial wall thickening also in 7 (33%). The location of the consolidation revealed a relatively even distribution, with no specific predilection site. The other associated pulmonary diseases included ARDS, bronchiectasis, severe pulmonary emphysema, idiopathic pulmonary fibrosis and pulmonary alveolar proteinosis. Conclusion : In the immunocompromised patients, or patients with an underlying pulmonary disease, whose CT scans showed pulmonary consolidation, especially in association with findings of bronchogenic spread, a cavity or bronchial wall thickening, meticulous examination for pulmonary tuberculosis is recommended.

• Journal of the Korean Society of Costume
• /
• v.36
• /
• pp.183-203
• /
• 1998

The wave of Avant-garde swept away all in the unique social background so called 'October Revolution' and the early 1900 Russian society which was able to absorb and accept anything. The Russian avant-garde has been affected by the Cubism and the Futurism those had peculiarly appeared in the early twentieth century, spreaded out to three spheres: the Suprematism, the Rayonism and the Constructivism. The Russian Constructivism has appeared in this background, concretely and ideally ex-pressed the ideology of the revolution into the artistic form and made an huge influence to the whole Russian society. The Constructivist like Tatlin, naum Gabo, Pevaner, Rodchenko, Stepanova, Popova and Exter gave great effect on the Soviet Constructive fashion design in 1920's after the Revolution. The Soviet costume in 1920s hold in common the characteristicss of the Constructive graphic as it is, geometrical and abstractive form, energetic and motility. In fashion design, these graphic qualities have been showed as the application of geometrical form and architectural image, physical distortion and transformation. And in textile design, the simple, dynamical presentation has been appeared. We can classify the Soviet costume at this time into three occasions. The first term is from late 1910 th mid 1920, and it is altered from folk costume design to modern one. With Lamanova as the first on the list, using the folk mitif, the Constructive expression of simple form has been gradually revealed in design. Designers like Makarova, Pribylskaia and Mukhina produced the plane, simple chemise style with the decoration of the Russian traditional motif. From early to late 1920 is the second term, and it is at the pick of the most active processing of the Constructive design. Not only at the costume in daily life but also at the theatrical costume and textile, the con-structive design has been represented all avail-able fields. Many Constructivists including Stepanova, Popova, Exter and Rodchenko took part in the textile design and costume design so as to evlvo their aesthetic concept. The third term is from late 1920 to early 1930. The socialistic realism has dominated over the whole culture and art, the revolutionary dynamic motif has been presented also in textile design. The formative features of Soviet Constructive fashion design are; silhouette, from, motif, color and fabric. The first, the silhouette : a straight rectangular silhouetted has been expressed through the whole period and a volumed one with distorted human body shape has introduced in the theatrical costume design. The second, the form: many lengthened rectangular forms have been made at beginnings, but to the middle period, geometrical, architectural forms have been more showed and there are energy and movement in design. At the last period, only a partial feature-division has been seen. The third, the motif; no pattern or ethnic motif has been partly used at beginnings, a figure like circle, tri-angle has gradually appeared in textile design. At latter period, a real-existent motif like an airplane has been represented with graphing and simplicity. The fourth, the color ; because of insufficient dyeing, neutral color like black or grey color has been mainly covered, but after middle term, a primary color or pastel tone has been seen, contrast of the fabric; without much development of textile industry after the Revolution, thick and durable fabrics have been the main stream, but as time had going to the last period, fabrics such as linen, cotton, velvet and silk have been varously choesn. At the theatrical costume, new materials like plastics and metals that were able to accentuate the form. The pursuit of popularity, simplicity and functionalism that the basic concept of Constructive fashion is one of the "beauty" which has been searching in modern fashion. And now we can appreciate how innovative and epochal this Soviet Constructive fashion movement was.ement was.

• The Korean Journal of Food And Nutrition
• /
• v.25 no.1
• /
• pp.26-31
• /
• 2012

For the purpose of production of GABA-rich tomato paste, this study was carried out to investigate GABA producing lactic acid bacteria from Korean traditional fermented food, Kimchi and optimize the culture conditions. As a result of fermentation, Lactobacillus brevis B3-20 among lactic acid bacteria isolated at the pre-experiments was the best producer of GABA at the tomato paste medium with 50%(wet-base) levels of dionized water. At the result of fermentation on the tomato paste medium with 0.5%(w/w) yeast extract, as a source of nitrogen, 3%(w/w) MSG(monosodium glutamate) and dionized water(the ratio of tomato paste and water was 2:8), Lb. brevis B3-20 produced the maximum GABA concentration, 143.38 mM. GABA-rich tomato paste showed the activity of free radical scavenging. Because GABA-rich tomato paste have functional ingredients such as ascorbic acid, lycopene, carotenoid, as well as GABA by lactic acid bacteria fermentation, GABA-rich tomato paste can be considered high functional materials.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.4
• /
• pp.505-513
• /
• 2009

Streptococcus mutans plays a major role in the formation of dental plaque and it is considered one of the important pathogens in the development of dental caries. Established dental plaque can be more resistant to antimicrobial agents and offers nutrient rich and relatively stable cariogenic conditions for bacteria. Thus bacteria growing in dental plaque have strong resistance to antimicrobial agents and they are not removed easily by the flow of saliva. Many researchers have been performed using natural materials, especially herbal extracts to prevent dental plaque. However, the strains of mutans streptococci used in the researches were not from Koreans. Therefore, it would be necessary to evaluate the antimicrobial activity of herbal extracts against clinical isolates of Streptococcus mutans isolated from saliva of Koreans living in Jeollabuk-do. For this study four clinical isolates were isolated from saliva samples of seventeen Korean people to investigate whether essential oils of Artemisia spp. have antimicrobial activity against them including four reference strains of Streptococcus mutans. Minimum inhibitory concentrations, Minimum bactericidal concentrations and time kill studies were performed and the results showed that Artemisia lavandulaefolia DC, Artemisia scoparia, and Artemisia capillaries have antimicrobial activity against the Streptococcus mutans clinical isolates and reference strains.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.3
• /
• pp.411-418
• /
• 2014

Three mushroom mycelia, Ganoderma lucidum, Hericium erinaceum, and Phellinus linteus, were separately diluted with the natural culture media Acanthopanax senticosus. Solid-state fermentation was used to produce three different A. senticosus-fermented mushroom mycelium groups: G. lucidum mycelia, H. erinaceum mycelia, and P. linteus mycelia. The resulting mycelia were analyzed to assess their efficacies as health functional foods. Optimized fermentation conditions were determined by considering the density and growth speed of mycelia in each A. senticosus-fermented mushroom mycelium group. The cultured mushroom mycelia under the optimized conditions were extracted using water and 70% ethanol. Extraction was followed by filtration, concentration and freeze-drying to produce extract powder of A. senticosus-fermented mushroom mycelia: Water extracts (FM-5111, FM-5121, and FM-5131) and 70% ethanol extracts (FM-5112, FM-5122, and FM-5132). Analysis of extract powder of A. senticosus-fermented mushroom mycelia was performed using the maker compounds eleutheroside B and eleutheroside E. Analysis of ${\beta}$-glucan contents was performed by enzymatic procedures.