• Journal of The Korean Society of Agricultural Engineers
• /
• v.54 no.3
• /
• pp.19-28
• /
• 2012

Greenhouse cultivation has been increasing for high quality and four season crop production in South Korea. For the cultivation in a greenhouse, maintaining adequate soil moisture at each crop growth stage is quite important for yield stability and quality while the behavior of moisture movement in the soil has complexity and adequate moisture conditions for crops are vary. Drip irrigation systems have been disseminated in the greenhouse cultivation due to advantages including irrigation convenience and efficiency without savvy consideration of the soil moisture redistribution. This study aims to evaluate soil moisture movement of drip irrigation according to the soil moisture uniformity assessment. Richards equation and finite difference scheme were adapted to simulate soil moisture behavior in soil. Soil container experiment was conducted and the model was validated using the data from the experiment. Two discharge rate (1 ${\ell}/hr$ and 2 ${\ell}/hr$) and three spaces between the emitters (10 cm, 20 cm, and 30 cm) were used for irrigation system evaluation. Christiansen uniformity coefficient was also calculated to assess soil moisture redistribution uniformity. The results would propose design guidelines for drip irrigation system installation in the greenhouse cultivation.

• Horticultural Science & Technology
• /
• v.32 no.5
• /
• pp.614-622
• /
• 2014

Melons (Cucumis melo L.) are generally grafted onto Cucurbita rootstocks to manage soilborne pathogens such as Monosporascus root rot and v ine decline (MRR/VD) and Fusarium wilt. However, g rafting onto Cucurbita rootstocks reportedly results in the reduction of fruit quality. In this study, the resistance to MRR/VD, yield, and fruit quality of melons grafted onto melon rootstocks were evaluated under greenhouse conditions. Eight melon rootstocks (R1 to R8) were used and the inodorus melon 'Homerunstar' was used as scion. Melon rootstocks R1 to R6 were selected based on resistance to MRR/VD under greenhouse conditions. Non-grafted 'Homerunstar' and plants grafted onto squash interspecific hybrid 'Shintozwa' rootstock (Cucurbita maxima D. ${\times}$ C. moschata D.) served as controls. Grafted melons were cultivated in the greenhouse infested with Monosporascus cannonballus during two growing seasons (summer and autumn). The responses to MRR/VD, yield, and fruit quality differed depending on the rootstocks and growing season. The melons grafted onto 'Shintozwa' exhibited less severe disease symptoms and higher survival rates than non-grafted melons in both seasons. While the melon rootstocks in the summer cultivation did not increase the survival rate compared to non-grafted melons, the melon rootstocks R1 and R2 in the autumn cultivation led to higher survival rates. The melon rootstocks resistant to MRR/VD increased the percentage of marketable fruits and marketable yields. Grafting onto the melon rootstocks caused little or no reduction of fruit quality such as low calcium content, fruit softening, and vitrescence, especially in lower-temperature autumn season. Accordingly, these results suggest that grafting onto the melon rootstocks may increase the tolerance to MRR/VD and the marketable yield without a reduction of fruit quality.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.32 no.1
• /
• pp.92-96
• /
• 1987

A sweet corn hybrid. ‘Golden Elite 70’ was grown at four plant densities of 4.500, 5.500, 6,500 and 7,500 plants per 10 ares under early and ordinary season cultivations, respectively, to determine effects of plant density on growth and yield of sweet corn. Plant and ear heights and ear size were greater, and ear number per plant was less at ordinary season cultivation compared to early season cultivation. However. ear weight per 10 ares were similar between two cultural practices. There were no significant interactions between cultural practice and plant density for plant height, yield and yield components except ear length. Plant density did not affect silking date, and plant and ear heights and did not show consistent trend in ear size. Ear number per plant decreased with increasing plant density. Ear number and weight per 10 ares increased as plant density increased up to 6,500 plants per 10 ares and tended to decrease at 7,500 plants per 10 ares. The results indicate that the optimum plant density for sweet corn would be around 6,500 plants per 10 ares.

• Korean Journal of Environmental Agriculture
• /
• v.38 no.4
• /
• pp.314-320
• /
• 2019

BACKGROUND: As consumption of unripe mandarin increases, its cultivation has increased in open field cultivation areas. Because unripe mandarin must be harvested before ripening and color change, the optimum harvest time must be determined. This study investigated the effect of the harvest season on the yield of unripe fruit and biennial flowering of 'Miyagawa' satsuma mandarin. METHODS AND RESULTS: Two areas of unripe mandarin orchard were selected, and the yield, fruit growth, working time, and flowering of trees the following year were investigated. Fruit was harvested at 40, 60, 80, 100, and 120 days after full bloom and at general ripening. Fruit yield of unripe mandarin increased with later harvest time from 100^th to 120^th day except normal ripening. The next year, biennial occurred with normal ripening and harvesting, but not at the 120^th day after full bloom. At the 40^th day (earliest harvest time), summer and autumn shoots were present, but not after the 100^th day. The 40^th day required the most harvesting time; because the time gradually decreased with later harvest, the harvest time was shortest on the 120^th day, and general ripening occurred shortly after the 120^th day. CONCLUSION: Harvesting of unripe mandarin 100-120 days after full bloom was ideal to reduce harvesting time, enhance yield, and enable flowering the following year.

• The Korean Journal of Mycology
• /
• v.12 no.2
• /
• pp.53-58
• /
• 1984

This experiment was performed to select the most suitable species of oyster mush­room for cultivation during summer season in Korea. The selection was made based upon mycelial growth on the ricestraw substrates, fruiting under hot weather conditions during the summer season in Korea and potential high productivity using six cultures from South-east Asia. The newly selected strain of Pleurotus sajor-caju (ASI 2070) grew well on the rice straw substrates and produced the higher yields of sporophores than other cultures tested. The primordia of the mushroom were formed between 10 to $35^{\circ}C$. The optimal temperature for fruiting ranged from 20 to $25^{\circ}C$.

• Journal of Biosystems Engineering
• /
• v.41 no.4
• /
• pp.294-303
• /
• 2016

Purpose: This study aimed to evaluate the profitability of four selective mechanization systems in rice cultivation. Methods: Field experiments were conducted in the farmers' field during the wet season (June to November) of 2015 in Bangladesh. Mechanization systems were applied to evaluate four different selective levels (treatment) in eleven consequent operations. Seedlings were raised in a traditional seedbed and trays for manual and mechanical transplanting, respectively. Land preparation, irrigation, fertilizer, pesticide, carrying, and threshing and cleaning operations were performed using the same method in all the experimental plots. The mechanical options in the transplanting, weeding, and harvesting operations were changed. The mechanization systems were $S_1$ = hand transplanting + hand weeding + harvesting by sickle, $S_2$ = mechanical transplanting + Bangladesh Rice Research Institute (BRRI) weeder + reaper, $S_3$ = mechanical transplanting + BRRI power weeder + reaper, and $S_4$ = mechanical transplanting + herbicide + reaper. This experiment was performed in a randomized complete block design with four replications. Power tiller, rice transplanter, BRRI weeder, BRRI power weeder, self-propelled reaper, BRRI open drum thresher, and BRRI winnower were used in the respective operations. Accordingly, the techno-economic performances of the different technologies were calculated and compared with those of the traditional system. Results: The mechanically transplanted plot produced 6-10% more yield than the hand transplanted plot because of the use of tender-aged seedlings. Mechanical transplanting reduced 61% labor and 18% cost compared to manual transplanting. The BRRI weeder, BRRI power weeder, and herbicide application reduced 74, 91, and 98% labor, respectively. The latter also saved 72, 63, and 82% cost, respectively, compared to hand weeding. Herbicide application reduced the substantial amount of labor and cost in the weeding operation. Mechanical harvesting also saved 96% labor and 72% cost compared to the traditional method of harvesting using sickle. Selective mechanization saved 15-17% input cost compared to the traditional method of rice cultivation. Conclusions: Mechanical transplanting with the safe use of herbicide and harvesting by reaper is the most cost- and labor-saving operation. The method might be the recommended set of selective mechanization for enhancing productivity.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.31 no.1
• /
• pp.31-44
• /
• 1989

In the vinyl house cultivation, the water consumption, evapotnanspirafion ratio, growth condifion by the growing stages and yields of tomato and cucumber were investigated when they cultivated by nutriculture, rice hull charcoal culture and NFF culture. The results obtained are summarized as follows: 1. The mean air temperature in the vinyl house during the experimental perica j was 1.9$^{\circ}$C higher than the outdoor air temperature, the rrnocirnum and minimum air temperature in the vinyl house was 4.6C and 1.7$^{\circ}$C higher than the outdoor temperature, respectively, and the mean daily evaporation in the vinyl house during the experimental period was 4.3rnm that is 02rnrn more than the outdoor evaporation 2. In the tomato cultivation, the growth of rice hull charcoal culture was the best among the three methods, and the growth of NFT culture and nutriculture were worse than the soil cultivation which is standard, and among the nutriculture, the growth of EC 1.3m.mho plot was the best. 3. In the cucumber cultivation, the growth of rice hull charcoal culture was the best, and while the growth condition of NFT culture was worse than the standard soil cultivation, the growth of nutriculture was better than the standard soil cultivation, and the growth of EC 1.3m.mho plot was the highest among the different treatments in the nutriculture. 4. In the tomato cultivation, the total water consumption of rice hull charcoal culture plot was 1107.5rnm which is the highest amount among the three methods, and in the nutriculture, the total water consumption of EC 1.3m.mho plot was 22lAmm which is the highest among the three different treatments. 5. In the cucumber cultivation, the total water consumption of rice hull charcoal culture was 11762rnm which is the highest, and the total water consumption of EC 1.3m.mho plot was 284.9rnm which is more than the 278.9mm of EC 1.Smmho plot and 262.9mm of EC 1.7rnmho plot. 6. The crop coefficient(Kc) of tomato was 0.82 in NFT culture, 4.67 in rice hull charcoar culture and 0.86~0.91 in nutriculture. 7. The crop coefficient(Kc) of cucumber was higher than tomato as 1.13 in NFT culture, 520 in rice hull charcoal culture and 1.08~1.19 in nutriculture. 8. The evapotranspiration ratio in the mid and late season were higher than the beginning and elongation stage, and the average evaportranspiration ratio of tomato and cucumber was 3.81 and 424, respectively, in the rice hull charcoal culture plot. 9. In the tomato cultivation, the total yield per plant of rice bull charcoal culture was 1443.Og which is the highest, and in the nutriculture, their yields were worse because of the damage of downy nidew disease. 10. In the cucumber cultivation, the total yield per plant of rice hull charcoal culture was 1965.7g which is the highest, and while the yield of NFT culture was ahout 25% lower than the stadard soil cultivation, the yield of nutriculture was higher than the standard soil cultivation, and among the treatments in the nutriculture, the yield of EC 1.3m.mho plot was the highest.

• Journal of Bio-Environment Control
• /
• v.15 no.2
• /
• pp.125-137
• /
• 2006

Pleurotus eryngii is one of the most promising mushrooms produced on the domestic farms. The quality as well as quantity of Eryngii is sensitively affected by micro climate factors such as temperature, relative humidity, $CO_2$ concentration, and light intensity. To safely produce high-quality Eryngii all the yew round, it is required that the environmental factors be carefully controlled by well designed structures equipped with various facilities and control systems. At the commercial mushroom cultivation houses of permanent frame type (A, B), this study was carried out to find out reasonable range of each environmental factor and yield together with economic and safe structures influencing on the optimal productivity of Eryngii. This experiment was conducted for about two-year ken Nov. 2003 to Dec. 2005 in cultivation house. Ambient temperature during the experiment period was not predominantly different from that of a normal year. The capacity of the hot water boiler and the piping systems were not enough. Because the capacity of electric heater and air circulation were not enough, air temperatures in cultivation house before improvement of system were maintained somewhat lower than setting temperature, and maximum air temperature difference between the upper and lower growth stage during a heating time period was about 5.1. But the air temperatures after system improvement were maintained within the limits range of setting temperature without happening stagnant of air. Air temperature distribution was generally distributed uniform. Relative humidity in cultivation house before , improvement was widely ranged about $44{\sim}100%$. But as the relative humidity after improvement was ranged approximately $80{\sim}100%$, it was maintained within the range of relative humidity recommended. And $CO_2$ concentration was maintained about $400{\sim}3,300mg{\cdot}L^{-1}$ range. The illuminance in cultivation house was widely distributed in accordance with position, and it was maintained lower than the recommended illuminance range $100{\sim}200lx$. The acidity of midium was some lower range than the recommend acidity range of pH $5.5{\sim}6.5$. The yield was relatively ununiform. In case of bottle capacity of 1,300cc, the mushroom of the lowest grade was less than 3%. The consumption electric energy was quite different according to the cultivation season. The electric energy consumed during heating season was much more than that of cooling season.

• Journal of Korean Society of Forest Science
• /
• v.94 no.6
• /
• pp.468-475
• /
• 2005

To understand spatiotemporal changes of temperature and humidity in Lentimula edodes cultivation sheds, temperature, relative humidity were measured with HOBO H8 series sensors in log cultivation sheds and sawdust cultivation sheds. The results obtained from October in 2003 to October in 2004 were as follows; 1. Horizontal temperature changes were smaller at center of cultivation shed inside than comer of cultivation shed inside, while relative humidity changes were greater about 3% at center of cultivation shed inside than corner of cultivation shed inside. 2. Vertical temperature changes showed that the temperature was higher at above than at below when the temperature rises, while the temperature was lower at above than at below when the temperature falls. Thus close to soil surface temperature showed a little fluctuation. Vertical relative humidity changes showed that the relative humidity was lower at above than at below when the temperature rises, while the relative humidity was higher at above than at below when the temperature falls. After all temperature and relative humidity was the opposite in cultivation shed. 3. It's showed in log cultivation shed that the minimum temperature was a subzero temperature until the end of April, while the minimum temperature did above zero after the beginning of the May. Besides a winter was the greatest at daily temperature range during the four season, about $30^{\circ}C$. On the other hand the minimum relative humidity was less than 20% at April, May and June but more than 40% after May.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.35 no.6
• /
• pp.487-491
• /
• 1990

This experiment was conducted to investigate the cultural practices for improvement of rice grain quality under different cultivation times and fertilizer levels at panicle initiation, heading and different drainage times after heading. The obtained results could be summarized as follows. In consideration of brown rice whole kernel form, and analyzed physico-chemical properties cultivation time required the optimum season before June 5. Feltilizer level at panicle initiation and heading needed 3kg/10a or less. Drainage time desired late drainage at 30-40 days after heading.