• Journal of Life Science
• /
• v.7 no.1
• /
• pp.59-65
• /
• 1997

In this experiment, gene actions were analysized for seven barley parents in order to obtain basic information on their genetic improvement by diallel crosses. The results obtained were summarized as follows. In analysis of variance, additive, dominant, maternal and reciprocal effects were observed significantly for culm length, tiller number, number of spiked per plant, culm diameter, awn length, leaf width, number of grains per spike, and 1000 grain weight. Over-dominance was shown by Vr-Wr graphic analysis in five characters such as tiller number, number of spikes per plant, length of flag leaf, number of grains per spike, and 1000 grain weight, and partial dominance in four characters such as culm length, culm diameter, awn length, and leaf width. Component of genetic varience analyzed for four characters such as culm diameter, awn length, length of flag leaf, and leaf width showed that additive effects were higher than dominant effects. Culm length, tiller number, number of spikes per plant, number of grains per spike, and 1000 grain weight showed dominant effects higher than additive effects. The narrow-sense heritability for awn length, leaf width, and number of grains per spike showed high values as more than 0.62, while broad-sense heritability for culm length, number of spikes per plant, culm diameter, awn length, leaf width, number of grains per spike, and 1000 grain weight showed high values as more than 0.65.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.43 no.1
• /
• pp.32-37
• /
• 1998

The objective of this study was to analyze lodging-related traits using different cultivars from Korea, Japan, and the U.S. in direct seeded rice on dry paddy field. Stem diameter and culm wall thickness were highest in 'Caloro' followed by 'Nongan', 'M202', and 'Calrose'. All the U.S. cultivars were higher than the others in stem diameter and culm wall thickness. These two traits were important with regard to lodging. The highest breaking strength (1442g) was observed in Caloro. 'Gancheoek', 'Dongjin', and transplanted 'Hatsuboshi' showed more than 1000g in breaking strength. Lodging index was lowest in Hatsuboshi followed by Nongan and Gancheok. Even though breaking strength of the U.S. cultivars was higher than others, their lodging index values were high. There were no statistically significant differences in starch content. However, Calrose, Caloro, Dongjin, and Koshihikari were relatively higher than others in starch content. Positive correlations were found between culm base weight, lignin and breaking strength. High contents of lignin and cellulose were observed in Nongan, transplanted Hatsuboshi, Calrose, and Caloro. Traits such as stem diameter, culm wall thickness, bending moment, culm length, breaking strength, cellulose, lignin, and culm base weight were closely related to a lodging index. According to path coefficient analysis, most important traits were culm length, stem diameter, thickness of clum wall, and top plant weight.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.36 no.4
• /
• pp.319-323
• /
• 1991

To determine how closely related to field lodging for several characters affecting the field lodging for several characters affecting field lodging, and to obtain the basic information for selection of lodging resistance genotype, an experiment was conducted with 10 varieties from May to Oct., 1990 at the experimental field in Sunchon Xational University. Culm length, dry weight per unit culm length (W/1), bending moment per unit culm diameter (W1/d), lodging index (L), bending load ratio (W1/P), and index of critical lodging load(W$_{s}$$^{2}$/1$^4$) were the most closely related characters to field lodging. Culm length showed highly significant positive correlation coefficient with field lodging(r=0.7607), but it may be undesirable to judge lodging resistance of genotype by culm length itself without consideration of culm stiffness. Considering the difficulty and time-consuming to measure the character, clum length, W/1, W1/d, and W$_{s}$$^{2}$/1$^4$ were easy to measure and hence would be the most useful variables to judge the lodging resistance of genotype. Culm diameter, cross sectional area of culm, thickness of culm wall, and the second inertia moment of cross section of culm were not correlated with field lodging at all. Breaking strength of culm showed significantly negative correlation coefficient (r=-0.3986) with field lodging.ing.

• Journal of the Korean Wood Science and Technology
• /
• v.15 no.3
• /
• pp.14-23
• /
• 1987

This study was carried out to investigate the anatomical characteristics, the radial and axial variation of the cell dimension and bulk density for four bamboo species used as the major material of bamboo products in Korea; Phyllostachys(P.bambusoides, P.edulis, P.nigra var.henonis, and Pnigra). The results obtained were summarized as follows; 1) In the outer part of culm, the mophological difference of cell diameter and distribution were not acknowledged. However, gum-like substance was occurred In the epidermis, hypodermis, cortex and metaxylem vessel of P.nigra, while it was occured only in the metaxylem vessel of P.edulis. 2) The protoxylem vessel in the central zone of culm-wall could be in the two types; the first type consisted of 4-5 small cell pieces occurred in P.edulis and P.nigra var. henonis, the second type of 1-2 large cell pieces in P.bambusoides and P.nigra. And transition of cell diameter from the vascular bundle sheath to the ground tissue was gradually enlarged in P.nigra and P.edulis but abruptly in P.bambusoides and P.nigra var. henonis. 3) Thin-wall tyloses were well developed in the outer and central zone of culm-wall in four species. 4) Compared with the central part of culm-wall, the number of parenchyma cells and the amount of the vascular bundle sheaths per unit area were a few in the inner part. The inner part nearest to the pith cavity was consisted of thick-well parenchyma cell. 5) The dimensional variations of metaxylem vessel and parenchyma cell in the radial direction were decreased from the inner part to the epidermis in all species observed. 6) The fiber length was the maximum in the central zone and its diameter was increased from the inner part to the outer part. In the axial variation. fiber length was slightly increased from the base and then decresed slowly toward the top, and its diameter was reverse. 7) The axial variation of the bulk density was continuously increased from the base toward the top and its radial variation was rapidly increased from the inner part to the epidermis.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.1
• /
• pp.123-130
• /
• 1996

Experiments were conducted to effect of seeding rates and growth regulator (KIM-112) application on lodging resistance and yield in direct seeding on flooded paddy surface. The number of seedlings per $m^2$ were ranged from 61 to 143, and seedling ratios were from 71.7 to 76.1％. The culm length was increased with the higher seeding rates. The culm length was significantly shortened by KIM-112 application, and the shortened effect of internodes were various with application times. The leaf angles with the culm and top leaves were errected and position of light reception by KIM-112 application, also the weight of culm base was increased. The bending moment at breaking of culm and culm diameter were decreased according to the higher seeding rates. The number of panicles per $m^2$ were increased according to the higher seeding rates. The ripened grain rate and 1, 000 grains weight became higher than the untreated control.

• Journal of Korean Society of Forest Science
• /
• v.26 no.1
• /
• pp.13-18
• /
• 1975

This study was intended to clarify interrelations among seven characters of bamboo and their influences upon its culm-volume. The analysis of covariance was used to obtain phenotypic correlations, genotypic correlations and environmental correlations among some characters of Phyllostachys bambusoides Sieb. et Zucc., and thereby path-coefficients were calculated based on Dewey's method. The characters considered here included the breast height diameter, culm-height, clear-length, subterranean stem, number of bamboo joints, butt-end diameter and culm-volume of bamboo. Average values, standard errors, variances and standard deviations for the characters mentioned above are shown in Table 1, and phenotypic correlations, genotypic correlations and environmental correlations among seven characters are shown in Table 2, according to the results, there are highly significant relationships among lines but not among some replications. According to Table 4, heritability values in the breast height and butt-end diameters are higher than those in other characters mentioned above. On the other hand, environmental correlations among general characters appear to have lower values than phenotypic and genotypic correlations do. It also appears that the butt-end diameter and breast height diameter are highly correlated with the culm-volume of bamboo. The path-coefficients of individual characters to the culm-volume of bamboo are computed from the correlations (Table 4) and presented in Figure 1 and Table 5, where it could shown the direct and indirect effects on the bamboo culm-volume of each character.

• Journal of Life Science
• /
• v.13 no.1
• /
• pp.29-33
• /
• 2003

The study was conducted to get genetic information on quantitative characters of $F_1$ in barley through diallel crosses using seven malting barley. The results obtained were summarized as follows. Additive, dominant, maternal, and reciprocal effort were observed in culm length, spike length, awn length, culm diameter, grain length, grain width, ]lumber of grains per spike, and 1000 grain weight. Based on the Vr-Wr graphical analysis, culm length, spike length, awn length, grain length, and number of grains per spike were found to be inherited over dominance. Dominant effects were higher than additive effects in culm length, spike length, awn length, culm diameter, grain length, grain width, number of grains per spike, and 1000 grain weight. The narrow- sense heritability showed high value as 40.06% for spike length.

• Korean Journal of Agricultural Science
• /
• v.12 no.2
• /
• pp.183-190
• /
• 1985

To determine anti-lodging effect of paclobutrazol and its influence on yield of rice, paclobutrazol was applied at 12 and 18g ai/10a to cv. Nakdongbyeo and cv. Seomjinbyeo 20, 15, and 10 days before heading under 12 and 20kg/10a nitrogen conditions. 1. Paclobutrazol reduced internode length of rice, especially internode N3. Higher suppression of stem of both cultivars and reduction of ear length in cv. Nakdongbyeo were observed when paclohutrazol was applied at 18g ai/10a 15 and 20 days before heading. 2. Paclobutrazol increased culm cross-section area, culm diameter, linear density and stem flexure resistance which affected anti-lodging efficacy. Although actual lodging was not occurred in field, less stem inclination was observed at paclobutrazol treated plots. 3. There were significant correlation between stem flexure resistance and culm cross-section area, culm diameter and linear density, and negative correlation between straw inclination angle and culm cross-section area and culm diameter. 4. Slight yield reduction was observed when paclobutrazol was applied at 18g ai/10a 20 days before heading. However, when paclobutrazol was applied at 12g ai/10a 10 and 15 days before heading, rice yield was not decreased compared to untreated control.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.11
• /
• pp.105-117
• /
• 1972

This experiment has been made to study the relationship between several characters affecting the field lodging and to establish some useful standards for selection of lodging resistant varieties and to classify the degree of lodging resistance in wheat and barley varieties of different sources. The experiment was carried at the Crop Experiment Station, Suwon in 1968. The results obtained are summarized as followings. a. The lodging index modified with bending moment of culm at breaking seemed to be the most useful character in checking the lodging resistance. Highly significant positive correlation (Barley; r=0.40-0.67, Wheat; r=0.46-0.68) was obtained between the lodging index and actual field lodging. b. Between two essential components expressing bending stiffness of the culm, the bending moment at breaking and secondary moment of inertia, a highly significant positive correlation (Barley; r=0.59, wheat; r=0.46-0.53) was observed. c. The bending stiffness of culm got stronger as the dry weight per unit culm, which express the quantity of accumulated dry matters in culm, increased. The correlation coefficient between those two factors was 0.35 to 0.40 in barley and 0.33 to 0.76 in wheat respectively. d. In both wheat and barley, highly significant negative correlation between lodging index and the other factors such as dry weight per unit culm (Barley; r=-0. 51 to -0.70, Wheat; r=-0.65 to -0.83) and bending moment of culm at breaking (Barley; r=-0.29 to -0.69, Wheat: r=-0.54 to -0.89) were observed. Particulary, weight of culm at breaking, secondary moment of inertia and section modulus showed significant negative correlation with lodging index in wheat. e. Outside diameter of culm expressed more intimate relationship with physical characteristics of culm than inside diameter and also showed highly significant correlation with weight of culm at breaking (Barley; r=0.42-0.56, Wheat; r=0.39-0.44) and with bending moment of culm at breaking (Barley; r=0.40-0.41, Wheat; r=0.38-0.49) and with secondary moment of inertia (Barley; r=0.56-0.57, Wheat; r=0.28-0.98) and with section modulus (Wheat; r=0.22-0.96). Between the thickness of culm and physical characteristics of culm also showed the positive correlation. f. There was positive correlation between the culm length and actual field lodging in several groups of variety among the varieties tested. But the culm length seemed to undesirable as a selection measure for the selection of the lodging resistant variety considering the stiffness of culm. g. In classification of lodging resistance for the varieties tested, many Korean barley varieties expressed excellent lodging resistant than wheat, but most of the wheat and barley varieties from Japan considered quite resistant to lodging. h. In selection of lodging resistant varieties, lodging index lower than 1.67 in barley and 1. 76 in wheat considered highly resistant to actual field lodging.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.21-21
• /
• 2017

Severe lodging has recurrently occurred at strong typhoon's hitting in recent climate change. The identification of quantitative trait loci (QTLs) and their responsible genes associated with a strong culm and their pyramiding are important for developing high-yielding varieties with a superior lodging resistance. To identify QTLs for lodging resistance, the tropical japonica line, Chugoku 117 and the improved indica variety, Habataki were selected as the donor parent, as these had thick and strong culms compared with the temperate japonica varieties in Japan such as Koshihikari. By using chromosome segment substitution lines (CSSLs) in which chromosome segments from the japonica variety were replaced to them from Habataki, we identified the QTLs for strong culm on chrs. 1 and 6, which were designated as STRONG CULM1 (SCM1) and STRONG CULM2 (SCM2), respectively. By using recombinant inbred lines (BILs) derived from a cross between Chugoku 117 and Koshihikari and introgression lines, we also identified the other QTLs for strong culm on chrs. 3 and 2, which were designated as STRONG CULM3 (SCM3) and STRONG CULM4 (SCM4), respectively. Candidate region of SCM1 includes Gn1 related to grain number. SCM2 was identical to APO1, a gene related to the control of panicle branch number, and SCM3 was identical to FC1, a strigolactone signaling associated gene, by performing fine mapping and positional cloning of these genes. To evaluate the effects of SCM1~SCM4 on lodging resistance, the Koshihiakri near isogenic line (NIL) with the introgressed SCM1 or SCM2 locus of Habataki (NIL-SCM1, NIL-SCM2) and the another Koshihikari NIL with the introgeressed SCM3 or SCM4 locus of Chugoku 117 (NIL-SCM3, NIL-SCM4) were developed. Then, we developed the pyramiding lines with double or triple combinations derived from step-by-step crosses among NIL-SCM1 NIL-SCM4. Triple pyramiding lines (NIL-SCM1+2+3, ~ NIL-SCM1+3+4) showed the largest culm diameter and the highest culm strength among the combinations and increased spikelet number due to the pleiotropic effects of these genes. Pyramiding of strong culm genes resulted in much increased culm thickness, culm strength and spikelet number due to their additive effect. SCM1 mainly contributed to enhance their pyramiding effect. These results in this study suggest the importance of identifying the combinations of superior alleles of strong culm genes among natural variation and pyramiding these genes for improving high-yielding varieties with a superior lodging resistance.