• Journal of Power System Engineering
• /
• v.14 no.4
• /
• pp.50-55
• /
• 2010

In order to investigate tribological effects of nano copper particles impregnated(CuN) on surface polytetrafluoroethylene(PTFE) on sealing wear and an experimental study was carried out to determine the wear behavior of copper nano-particles impregnation two kind thickness in super critical $CO_2$ liquid. Experimental results showed that the friction coefficients of CuN PTFE at the low sliding speed(0.44m/s) and the oil temperature ($60^{\circ}C$) were higher than that of virgin PTFE. And a thin nano copper particles impreganated thickness was formed on the surface in the PTFE and the specimen with this treatment has much better friction properties than the original one. Fortunately, at the high load(80 N) and the oil temperature, the friction coefficient of CuN PTFE was lower than that of virgin PTFE. This evidenced the load carrying capacity of CuN PTFE was much better than that of virgin PTFE under the high load condition(80 N) specially. Therefore, it can be concluded that the friction coefficient variation of CuN PTFE is very small but its wear rate decreases greatly with increase in sliding speed.

• Korean Journal of Materials Research
• /
• v.4 no.3
• /
• pp.268-279
• /
• 1994

The x-ray powtler pattern of single phase $Bi_2S_2CaCu_2O_{8+x}$ has been identified and fullyindexed using a pseudotetragonal subcell with a= 5.408, c = 30.83 $\AA$ and an incommensurate supercellwith reciprocal lattice vector, X$q^*$, given by $q^*=0.211b^*-c^*$. The x -ray powder pattern of the Pb-free110K superconductor phase "$Bi_2S_2CaCu_2O_{10+x}$" has many lines which belong t.o an incommensuratesupercell. Using elect.ron d~ffraction pImt.ographs as a indexing guide, an indexing scheme for the powderpattern has been obtained. The unit cell has a geometrically orthorhombic subcell a=5.411, b= 5.420, c=37.29(2) $\AA$. Supercell reflections have indices that are derived from the subcell k, 1 indices by addition uf$\pm q^*$, where $\pm q^*=0.211b^*-0.78c^*$The incommensurate con~ponent In the b dwection, $\delta$, is the same for both phases but on going from2212 to 2223 phase, the superlattic component in the c direction changes from commensurate($\varepsilon$=1) toincommensurate($\varepsilon$=0.78).X>$\varepsilon$=0.78).

• Clean Technology
• /
• v.15 no.1
• /
• pp.60-66
• /
• 2009

Adsorptive removal of tetrahydrothiophene (THT) and tert-butylmercaptan (TBM) that were widely used sulfur odorants in pipeline natural gas was studied using various ion-exchanged NaY zeolites at ambient temperature and atmospheric pressure. In order to improve the adsorption ability, ion exchange was performed on NaY zeolites with alkali metal cations of $Li^+,\;Na^+,\;K^+$ and transition metal cations of $Cu^{2+},\;Ni^{2+},\;Co^{2+},\;Ag^+$. Among the adsorbents tested, Cu-NaY and Ag-NaY showed good adsorption capacities for THT and TBM. These good behaviors of removal of sulfur compound for Cu-NaY and Ag-NaY zeolites probably was influenced by their acidity. The adsorption capacity for THT and TBM on the best adsorbent Cu-NaY-0.5, which was ion exchanged with 0.5 M copper nitrate solution, was 1.85 and 0.78 mmol-S/g at breakthrough, respectively. It was the best sulfur capacity so far in removing organic sulfur compounds from fuel gas by adsorption on zeolites. While the desorption activation energy of TBM on the Cu-NaY-0.5 was higher than NaY zeolite, the difference of THT desorption activation energy between two zeolites was comparatively small.

• 한국초전도학회:학술대회논문집
• /
• v.10
• /
• pp.103-106
• /
• 2000

We have studied the magnetic properties in Bi$_2$Sr$_2$CaCu$_2$O$_8$ single crystal with columnar defects using micro Hall-probe array. We found that fold profiles inside sample were similar to the Bean's critical state model from the magnetic hysteresis measurement. In the magnetic relaxation measurement, the normalized relaxation rates were maximum near the center and decreased toward the edge of the sample expect zero gauss. The relaxation rates as a function of the temperature were maximum near the 40K and rapidly decreased both sides of the peak.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.366-367
• /
• 2006

Carbon nanotubes (CNTs) have attracted remarkable attention as reinforcement for composites owing to their outstanding mechanical properties. The CNT/Cu nanocomposite is fabricated by a novel fabrication process named molecular level process. The novel process for fabricating CNT/Cu composite powders involves suspending CNTs in a solvent by surface functionalization, mixing Cu ions with CNT suspension, drying, calcination and reduction. The molecular level process produces CNT/Cu composite powders whereby the CNTs are homogeneously implanted within Cu powders. The mechanical properties of CNT/Cu nanocomposite, consolidated by spark plasma sintering of CNT/Cu composite powders, shows about 3 times higher strength and 2 times higher Young's modulus than those of Cu matrix.

• Corrosion Science and Technology
• /
• v.2 no.3
• /
• pp.127-134
• /
• 2003

In order to explain the effect of alloying Cu on the corrosion resistance of stainless steels in chloride media for both ferritic and austenitic stainless steels, the corrosion behavior of Cu-bearing stainless steels was investigated. Alloying Cu showed beneficial effect in an active potential range and harmful effect in a noble potential range. The beneficial effect of alloying Cu was explained by the stability of deposited Cu on an anodic surface. Difference in the effect of alloying Cu between the ferritic and austenitic steels was ascribed by the differences in their corrosion potentials and the morphology of the deposited Cu.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.12
• /
• pp.1712-1716
• /
• 2004

Copper-bearing montmorillonite (Cu-MMT) was produced by $Cu^{2+}$ cation exchange reaction. X-ray diffraction analysis showed that that the (001) basal spacing of the MMT crystal lattice increased from 1.544 to 1.588 nm after $Cu^{2+}$ exchange. This indicated that $Cu^{2+}$ entered into interlayer position of MMT as a hydrated cation or composite cation. In vitro results indicated that Cu-MMT had antibacterial activity on Escherichia coli $K_{88}$. Cu-MMT had unbalanced positive charge after cation exchange. Its antibacterial activity resulted from two aspects, one was electrostatic attraction which made E. coli $K_{88}$ being adhered on the montmorillonite surface, the other was the $Cu^{2+}$ slowly released, which could kill bacteria. In an in vivo study, four replicates of eight weanling pigs were assigned to each of two dietary treatments to study the effects of Cu-MMT on diarrhea, E. coli in the lumen of the jejunum and morphology of jejunal mucosa. As compared to the control, supplementation of the diet with 0.2% Cu-MMT improved average daily gain by 12.50% (p<0.05) and decreased F/G by 9.42% (p<0.05). The mean diarrhrea incidence was decreased by 71.80% (p<0.05). The viable counts of Escherichia coli in jejunal contents were significantly reduced (p<0.05). Villus height and the villus height to crypt depth ratio at the jejunal mucosa were increased by 19.09% (p<0.05) and 37.10% (p<0.05), respectively.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.4
• /
• pp.1331-1335
• /
• 2011

We report the results of the characterization of Cu oxide thin films deposited by radio frequency (r.f.) magnetron sputtering at different annealing temperatures. The deposited Cu oxide thin films were investigated by scanning electron microscopy, spectroscopic ellipsometry, X-ray diffraction, atomic force microscopy, Xray photoelectron spectroscopy, and contact angle measurements. The thickness of the films was about 180 nm and the monoclinic CuO phase was detected. The $CuO_2$ and $Cu(OH)_2$ phases were grown as amorphous phase and the ratio of the three phases were independent on the annealing temperature. The surface of Cu oxide films changed from hydrophilic to hydrophobic as the annealing temperature increased. This phenomenon is due to the increase of the surface roughness. The direct optical band gap was also obtained and laid in the range between 2.36 and 3.06 eV.

• Korean Journal of Animal Reproduction
• /
• v.25 no.1
• /
• pp.35-42
• /
• 2001

This study was performed to elucidate the patho-physiology of copper-poisoned rats after consecutive oral administrations of the copper sulfate. The changes in feed and water intake, gains of body weight, blood pictures and mineral compositions of several organs were observed to measure the effects of copper poisoning. 1. Compared with control group, every experimental group of which 1,000, 2,000, or 4,000 ppm/kg of copper sulfate was administered displayed a gradual decrease in feed intake in dose-dependent manners. 2. After 1,000, 2,000 or 4,000 ppm/kg of copper sulfate administration, water intake seemed to decrease in every experimental group in dose-dependent manners, but there was little statistical significance. 3. After 1,000, 2,000 or 4,000 ppm/kg of copper sulfate administration, body weight decreased in every experimental group in dose-dependent manners. 4. After 1000, 2,000 or 4,000 ppm/kg of copper sulfate administration, the PLT values and numbers of RBC and WBC significantly increased after copper sulfate administration, but the values of Hb and PCV were lower than those of control group's. 5. After 2,000 or 4,000 ppm/kg of copper sulfate administration, the levels of Cu, Mn, Fe, Pb and Zn in the liver were lowered, but the levels of Mn, Fe, Pb and Zn in the kidneys increased except Cu levels.

• Progress in Superconductivity
• /
• v.6 no.1
• /
• pp.13-18
• /
• 2004

High-.ate in-situ$ YBa_2$Cu$Cu_3$$O_{7-x}$ (YBCO) film growth was demonstrated by means of the electron beam co-evaporation. Even though our oxygen pressure is low, ∼$5 ${\times}$10^{-5}$ Torr, we can synthesize as-grown superconducting YBCO films at a deposition rate of around 10 nm/s. Relatively high temperatures of around 90$0^{\circ}C$ was necessary in this process so far, and it suggests that this temperature at a given oxygen activity allows a Ba-Cu-O liquid formation along with an YBCO epitaxy. Local critical current density shows a clear correlation with local resistivity. Homogeneous transport properties with a large critical current density ($4 ∼ 5 MA/\textrm{cm}^2$ at 77K, 0T) are observed in top faulted region while it is found that the bottom part carries little supercurrent with a large local resistivity. Therefore, it is possible that thickness dependence of critical current density is closely related with a topological variation of good superconducting paths and/or grains in the film bodies. The information derived from it may be useful in the characterization and optimization of superconducting films for electrical power and other applications.