• Journal of Surface Science and Engineering
• /
• v.49 no.3
• /
• pp.265-273
• /
• 2016

The effects of surface modification by nitric acid on the pre-treatment of electroless copper plating were investigated. Copper was electroless-plated on the nitric acid treated graphite activated by a two-step pre-treatment process (sensitization + activation). The chemical state and relative quantities of the various surface species were determined by X-ray photoelectron spectroscopy (XPS) after nitric acid modification or pre-treatment. The acid treatment increased the surface roughness of the graphite due to deep and fine pores and introduced the oxygen-containing functional groups (-COOH and O-C=O) on the surface of graphite. In the pre-treatment step, the high roughness and many functional groups on the nitric acid treated graphite promoted the adsorption of Sn and Pd ions, leading to the uniform adsorption of catalyst ($Pd^0$) for Cu deposition. In the early stage of electroless plating, a lot of tiny copper particles were formed on the whole surface of acid treated graphite and then homogeneous copper film with low variation in thickness was formed after 30 min.

• Korean Journal of Materials Research
• /
• v.15 no.1
• /
• pp.54-60
• /
• 2005

Recently a lots of problems have observed in high densified and high integrated electronic components. One of them is ion migration phenomena, which induce the electrical short of electrical circuit. ion migration phenomena has been observed in the field of exposing the specific environment and using for a long tin e. This study was evaluated the generation time of ion migration and was investigated properly test method through water drop test and high temperature high humidity test. Also we observed direct causes and confirmed generation mechanism of dendritic growth as we reproduced the ion migration phenomena. We utilized PCB(printed circuit board) having a comb pattern as follows 0.5, 1.0, 2.0 mm pattern distance. Cu, SnPb and Au were electroplated on the comb pattern. 6.5 V and 15 V were applied in the comb pattern and then we measured the electrical short time causing by ion migration. In these results, we examined a difference of ion migration time depending on pattern materials, applied voltage and pattern spacing of PCB conductor.

• Bulletin of the Korean Chemical Society
• /
• v.11 no.5
• /
• pp.411-415
• /
• 1990

The dabsylation of amino acids has been applied to resolve their optical isomers with the use of chiral mobile phase in high performance liquid chromatography. The dabsyl amino acids were successfully separated on reversed phase column($C_{18}$) by adding a chiral L-benzylproline-Cu(II) chelate to the mobile phase. The separation selectivity of the dabsyl amino acid enantiomers was not less than that of dansyl amino acids. The retention order of the dabsyl amino acid enantiomers was as those of the dansyl amino acid enantiomers except dabsyl threonine. The optical selectivity of the dabsyl amino acids increase with pH of the mobile phase and concentration of the chelate, but slightly decreases with concentration of buffer and organic solvent composition. However serine, methionine, valine, and leucine showed a slight decrease in the optical selectivity with increase in pH. The retention times of the dabsyl amino acids decreases with increasing pH and acetonitrile concentration but increases with the concentration of the chiral chelate added. The mechanism of the optical resolution is based on a stereospecific interaction including a intramolecular hydrophobic effect and SN-2 reactivity of the ligand exchange chromatography.It is advantageous to detect absorption at 436 nm, which is less interferent them the other detection systems. The derivatized dabsyl amino acids are stable for a month.

• Journal of Electrochemical Science and Technology
• /
• v.9 no.4
• /
• pp.308-319
• /
• 2018

Single step electrodeposition of $Cu_2ZnSnS_4$ (CZTS) for solar cell applications was studied using an aqueous thiocyanate based electrolyte. The sodium thiocyanate complexing agent was found to decrease the difference in the deposition potential of the elements. X-ray diffraction analysis of the samples indicates the formation of kesterite phase CZTS. UV-vis studies reveal the band gap of the deposits to be in the range of 1.2 - 1.5 eV. The thickness of the deposit was found to decrease with increase in pH of the electrolyte. Nearly stoichiometric composition was obtained for CZTS films coated at pH 2 and 2.5. I-V characterization of the film with indium tin oxide (ITO) substrate in the presence and the absence of light source indicate that the resistance decrease significantly in the presence of light indicating suitability of the deposits for solar cell applications. Results of electrochemical impedance spectroscopic studies reveal that the cathodic process for sulfur reduction is the slowest among all the elements.

• ETRI Journal
• /
• v.41 no.3
• /
• pp.396-407
• /
• 2019

Laser-assisted bonding (LAB) is an advanced technology in which a homogenized laser beam is selectively applied to a chip. Previous researches have demonstrated the feasibility of using a single-tier LAB process for 3D through-silicon via (TSV) integration with nonconductive paste (NCP), where each TSV die is bonded one at a time. A collective LAB process, where several TSV dies can be stacked simultaneously, is developed to improve the productivity while maintaining the reliability of the solder joints. A single-tier LAB process for 3D TSV integration with NCP is introduced for two different values of laser power, namely 100 W and 150 W. For the 100 W case, a maximum of three dies can be collectively stacked, whereas for the 150 W case, a total of six tiers can be simultaneously bonded. For the 100 W case, the intermetallic compound microstructure is a typical Cu-Sn phase system, whereas for the 150 W case, it is asymmetrical owing to a thermogradient across the solder joint. The collective LAB process can be realized through proper design of the bonding parameters such as laser power, time, and number of stacked dies.

• Economic and Environmental Geology
• /
• v.54 no.2
• /
• pp.213-232
• /
• 2021

Ore criteria at the Sheba Deposit indicate orogenic mineralization type. Rocks and mineral assemblages suggest low formation-temperature of green-schist facies. Pyrite found in two generations; Type1 is irregular grains, contains higher arsenic and gold contents, compared to the relatively younger phase Type2 pyrite, which is composed of euhedral grains, found adjacent to late quartz-carbonate veins or at rims of type1 pyrite. Two gold generations were identified; type1 found included in sulphides (mainly pyrite). The second gold type was remobilized (secondary) into free-lodes within silicates (mainly quartz). Gold fineness is high, as gold contains up to 95 wt. % Au, Ag up to 3.5 wt. %, and traces of Cu, Ni, and Fe. Pyrite type2 contains tiny mineral domains (rich in Al, Mn, Hg, Se, Ti, V, and Cr). Zoning, and replacement textures are common, suggesting multiple mineralization stages. The distribution and relationships of trace elements in pyrite type2 indicate three formation patterns: (1) Al, Mn, Hg, Se, Ti, V, Cr, and Sn are homogeneously distributed in pyrite, reflecting a synchronous formation. (2) As, Ni, Co, Zn, and Sb display heterogeneous distribution pattern in pyrite, which may indicate post-formation existence due to other activities. (3) Au and Ag show both distribution patterns within pyrite, suggesting that gold is found both in microscopic phases and as chemically bounded phase.

• Journal of Conservation Science
• /
• v.37 no.4
• /
• pp.340-356
• /
• 2021

We have tried the experimental research of lost-wax casting to reconstruct Gilt-Bronze Pensive Bodhisattva; preliminary and reconstruction experiment based on ancient texts. Main object to reconstruct is Korean National Treasure No.83, Gilt-Bronze Pensive Bodhisattva (Maitreya), then we measure alloy ratio and casting method based on the scientific analysis. Other impurities were removed from the base metal components(copper : tin : lead) and their ratio was set to 95.5 : 6.5 : 3 where the ratios for tin and lead were increased by 2.5% each. The piece-mold casting method was used, and piece-mold casting experiments were carried out twice in this study but supplementary research on piece-mold casting was necessary. The microstructure was confirmed to be typical cast microstructure and the component analysis result was similar to that of the prior study. Analysis of the chemical composition is confirmed to copper, tin, lead, and zinc, and the chemical composition of the matrix was 87.8%Cu-7.5%Sn-2.7%Pb-2.1%Zn, and similar to previous experimental research. Also resulted in the detection of small impurity in Zn. Analysis of the mould revealed that the mould was fabricated by adding quartz and organic matter for structural stability, fire resistance, and air permeability. We expect that our research will contribute to provide base data for advanced researches in future.

• Korea Trade Review
• /
• v.47 no.4
• /
• pp.177-195
• /
• 2022

This study analyzed the volatility spillover effect between international non-ferrous metal futures markets using the BEKK-GARCH model. Statistical data are futures price data of copper (CU), aluminum (AL), nickel (NI), tin (SN) from Shanghai Futures Exchange (SHFE) and London Metal Exchange (LME) from April 1, 2015 to December 31, 2021. Combining the research results, first, in the case of copper, aluminum, and nickel, it was found that there was a two-way volatility spillover effect between the Shanghai and London markets, and the international influence of the London market was greater. Second, in the case of the tin, it was found that the Shanghai market has a volatility spillover effect on the London market from stage I, and it is strengthened in stage II. Third, in the case of nickel, it was found that there was a two-way volatility spillover effect in the first stage, but in the second stage, the London market had a unidirectional volatility spillover effect with respect to the Shanghai market. This study confirmed that China's influence in the international non-ferrous metal futures market is gradually increasing. In addition, it suggested that international investors can engage in arbitrage and hedging using China's non-ferrous metal futures market.

• Journal of Food Hygiene and Safety
• /
• v.3 no.1
• /
• pp.7-18
• /
• 1988

In 1987, the level of heavy metals were determined ina total of 200 samples of 9 species of shellfish of Korea. The samples were collected at the fish. markets by 10 Public Institute of Health. The samples were whelk (Buccinum striatiBBimum), oyster (Crassostrea gigas), ark shell(Tegillarca granesa), shartnecked clam (Venerupis semidecussta), hard clam (Meretrix lusoria), top shell (Turbo cornutus), abalone (Haliotis gigantea), ark shell (Scapharea broughtonii), sea-mussel (Mytilus conuscus gould), respectively. The levels of total mercury, lead, cadmium, arsenic, copper, zinc and manganese were determined. The total mercury levels were determined by mercury analyzer using the combustion gold amalgamation method. The arsenic level were determined by spectrophotometry using colorimetric sil ver diethyldithiocarbamate method after dry ash dige8tion of the samples with magnesium oxide and magnesium nitrate. The levels of other metals were determined by inductively coupled pluma spectrophotometry after wet digestion of the samples with nitric acid and su1furic acid. The results were summerized as follows; 1. The overallranges and mean(ppm) were; Hg, ND-O.221 (0.036); Pb, 0.05-1.51 (0.37); Cd, 0.02-1.86 (0.61); As, 0.5-3.97 (1.22); Cu, 0.14-54.16 (4.93); Zn, 7.40-207.17 (30.09); Mn, 0.13-s.72 (3.40). 2. The levels of all 6 metals were found to be below the maximum permissible Iimits set by the Japan lor mercury, the Netherland for lead the Hong Kong for cadmium. The Finland for Arsenic no statutory Iimits for Zn and Mn in shellfish in any countries. 3. The results show that all the 9 species of shellfish studied, none have accumulated levels dangerous enough to pose a health problem.roblem.

• Journal of Conservation Science
• /
• v.36 no.2
• /
• pp.123-142
• /
• 2020

We attempted an experimental study of lost-wax casting to reconstruct the Gilt-bronze pensive Bodhisattva; The main object we aimed to reconstruct was the Korean national treasure No.83, Gilt-bronze pensive Bodhisattva(Maitreya); thus, we scientifically analyzed and measured the alloy ratio and casting method. Initially, the alloy ratio we used during the preliminary experiment was Cu:Sn:Pb = 95.5:4.0:0.5; we then increased tin and lead by 2.5% to consider vaporization during the main experiment. After applying lost-wax casting, we realized that 30% rosin contributed to proper hardness after the wax hardness experiment. The microstructure revealed normal casting character(α-Cu, δ), and the results of the chemical analysis are identical to those of previous studies. The analysis of the mold suggests the presence of quartz powder for structural stability and fire-resistance along with other organic materials whose contribution is still unknown. We expect that our research will serve to provide basic data for advanced studies in the future.