• 한국재료학회지
• /
• 제8권4호
• /
• pp.328-336
• /
• 1998

본 연구에서는 기지금속과의 고상이나 액상의 고용한이 거의 없는 금속-카본(carbon)계에서 고에너지 볼밀공정을 이용하여 고체 윤활 청동베어링용 Cu-C-X계 나노복합금속분말을 제조하고자 하였다. Cu-10wt.%C-5wt.%AI과 Cu-10wt.%C-5wt.%Fe의 혼합분말을 이르곤 분위기의 attritor내에서 기계적 합금화한 후 Cu-C-X의 나노복합금속분말의 미세조직 특성을 조사하였다. AI, Fe를 첨가하였을 때 10시간 이상의 MA공정에서부터 약 $10\mu\textrm{m}$이하의 미세한 Cu-C-X나노복합금속분말을 얻을 수 있었으며, MA 시간에 따른 분말의 형상과 미세구조 변화는 금속-금속계의 MA 과정과 유사하게 진행되는 것을 알 수 있었다. Cu-C-X 나노복합금속분말의 X-선 회절시험 결과, MA 시간에 따라 Cu와 C분말의 회절피크의 폭은 넓어지고 회절강도는 감소하였으며, 특히 흑연피크의 MA시간에 따른 소멸은 흑연의 낮은 원자산란계수 때문에 의한 X-선 흡수 영향으로 고찰하였다. Williamson-Hall식으로 계산된 Cu-C-X 나노복합금속분말내의 Cu의 결정립은 15시간 이상의 MA공정에서부터 약 10nm이하의 크기를 가졌으며, TEM 분석결과로는 불규칙한 형상의 약 10-30nm 크기로 복합화된 Cu결정립을 확인할 수 있었다.

• 한국주조공학회지
• /
• 제41권5호
• /
• pp.411-418
• /
• 2021

Ni 혹은 Cu 첨가에 따른 고규소 고용강화 페라이트계 구상흑연주철의 기계적 성질과 미세조직 변화를 실험적으로 확인하기 위해, Ni 및 Cu 투입량을 3.0wt% 이내 그리고 0.9wt% 이내에서 조절하여 시편단위 사형주조를 진행하였다. 실험 결과 고용강화 페라이트계 구상흑연주철 내 Ni 혹은 Cu 함량이 증가하면 합금 내 강도 특성과 경도가 증가하였고 연성은 감소하였다. 한편, 합금 내 Ni 및 Cu 함량이 비슷한 경우, Ni이 포함된 고용강화 페라이트계 구상흑연주철보다 Cu가 포함된 합금이 더 높은 펄라이트 분율을 나타내었다. Ni이 포함된 고용강화 페라이트계 구상흑연주철의 미세조직에 미치는 기계적 성질의 경우에는 펄라이트 분율이 10% 이내 일 때 강도, 경도, 연신율이 우수하였으나, 펄라이트 분율이 10% 이상 증가할 경우 급격한 연신율 감소를 나타내었다. 한편, Cu가 첨가된 고용강화 페라이트계 구상흑연주철의 경우에는 펄라이트 분율 증가에 따라 강도와 경도는 점점 증가하였으며 연신율은 점점 감소하는것을 확인하였다. 고용강화 페라이트계 구상흑연주철 내 첨가원소에 따른 이러한 미세조직과 기계적 성질 차이는 Cu 대비 Ni의 낮은 펄라이트 안정화 효과와 첨가원소 함량에 따른 기지상 강화효과 차이가 복합적으로 작용하였기 때문으로 판단된다.

• Tribology and Lubricants
• /
• 제9권2호
• /
• pp.49-55
• /
• 1993

The dry sliding wear properties of the sintered Cu-10 wt%Sn bronze alloys reinforced with $SiC_w$ and $SiC_p$ were investigated by a pin-on-disc wear testing machine. The worn surfaces and the cross sections of the wear specimens and the wear debris were observed by SEM to study the effect of the variation of the ceramic phase contents in the composite and the wear condition on the wear behaviors. The wear of bronze matrix was dominated by the adhesive wear. The transition from mild to severe wear was found in the bronze matrix specimens at the applied load higher than 20N where the surface delamination caused the severe wear. The addition of $SiC_w$ and $SiC_p$ reinforcements in the romposites was proved to reduce the wear rate by the matrix strengthening at the applied load higher than 20N. SiC whiskers having a large length to diameter ratio which hold the deformed matrix were effective to hinder the crack propagation near the worn surface. Thus the maximum wear resistance was obtained in the composite reinforced by $SiC_w$ at the higher applied load.

• 한국주조공학회지
• /
• 제14권5호
• /
• pp.429-437
• /
• 1994

Influence of interfacial structure between matrix and particle in A356/coated SiC composite fabricated by squeeze casting method was studied. Experimental variables are types of coated metallic film on SiC particles such as Cu, Ni-P, and applied pressure for squeeze casting. It was found that coating treatment on SiC particles improves the wetting of liquid A356 alloy on SiC particles. SiC particle distribution is very homogeneous in A356 matrix alloy which is fabricated by squeeze casting. Analysing the surface morphology of fractured A356/coated SiC, it was concluded that metallic thin film by coating treatment on SiC particle improves the interfacial bonding between particle and matrix, and so does on mechanical properties such as tensile strength. However, there was on significant difference in hardness between those composite made of as-received SiC particle and coated SiC particle.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.980-981
• /
• 2006

In this study, bottom-up type powder processing and top-down type SPD (severe plastic deformation) approaches were combined in order to achieve full density of Carbon nanotube (CNT)/metal matrix composites with superior mechanical properties by improved particle bonding and least grain growth, which were considered as a bottle neck of the bottom-up method using the conventional powder metallurgy of compaction and sintering. ECAP (equal channel angular pressing), the most promising method in SPD, was used for the CNT/Cu powder consolidation. The powder ECAP processing with 1, 2, 4 and 8 route C passes was conducted at room temperature.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1037-1038
• /
• 2006

The increasing demand of PM parts for automobile and aerospace applications has caused a strong development of the aluminium based metal matrix composites (MMCs).Aluminium alloys are one of most widely used materials as matrix in MMCs, both in research and development as well as in industrial applications. In the present work, the influence of the ceramic reinforcement addition to a 2xxx series aluminium alloy is studied. Several percentages of TiCN have been added to the Al-Cu alloy using PM techniques, in order to analyze its influence on the liquid phase sintering process and on the final properties of the material.

• Journal of Electrochemical Science and Technology
• /
• 제10권1호
• /
• pp.82-88
• /
• 2019

Here, we report on nanocrystalline Si-Al-M (M = Fe, Cu, Ni, Zr) alloys for use as an anode for lithium-ion batteries, which were fabricated via a melt-spinning method. Based on the XRD and TEM analyses, it was found that the Si-Al-M alloys consist of nanocrystalline Si grains surrounded by an amorphous matrix phase. Among the Si-Al-M alloys with different metal composition, Ni-incorporated Si-Al-M alloy electrode retained the high discharge capacity of 2492 mAh/g and exhibited improved cyclability. The superior $Li^+$ storage performance of Si-Al-M alloy with Ni component is mainly responsible for the incorporated Ni, which induces the formation of ductile and conductive inactive matrix with crystalline Al phase, in addition to the grain size reduction of active Si phase.

• 분석과학
• /
• 제11권4호
• /
• pp.297-304
• /
• 1998

무기 priority pollutants의 분석에 미치는 매질의 영향을 살펴보기 위하여 도금, 피혁, 제지, 전기, 염색 sludge에 7종의 무기 priority pollutants(Ni, Cr, Cu, Zn, Pb, Cd, Hg)를 첨가하고 EPA 3050방법, 환경처의 폐기물공정시험방법 및 폐기물공정시험방법을 수정한 본 연구실 방법으로 비교 연구하였다. EPA 3050법에 따라 추출한 경우 Hg를 제외하고 평균회수율은 95.5%, 폐기물공정시험방법의 용출시험 방법에 따라 추출한 경우는 11.1%, 그리고 본 연구실에서 폐기물공정시험방법을 수정한 추출법의 경우는 27.7%의 평균 회수율이 나타났다. 매질에 따른 digestion에 대한 영향을 살펴보기 위하여 추출법에 의해 추출된 용액을 MDS(microwave digestion system)와 $HNO_3+HClO_4$ digestion 방법으로 회수율을 비교하였다. 유기 및 무기 매질에 대한 영향을 살펴보기 위하여 유기 매질인 경우는 triethanol amine, 무기 매질인 경우는 $FeCl_3{\cdot}6H_2O$와 $AlCl_3{\cdot}6H_2O$를 첨가하여 분석용 시료를 조제하고 AAS 및 HG-AAS로 회수율을 구하였다. 유기 및 무기 매질을 첨가한 시료가 첨가 하지 않은 시료 보다 회수율이 낮게 나타남에 따라 매질에 의한 영향을 받는 것으로 조사되었다. Hg는 MDS로 digestion하는 것이 회수율이 높게 나타났으며, Hg를 제외한 다른 원소는 $HNO_3+HClO_4$로 digestion 하는 것이 회수율 증가를 나타냈다.

• 한국주조공학회지
• /
• 제11권3호
• /
• pp.208-216
• /
• 1991

The solidification behavior of the squeeze cast composites of aluminum alloys reinforced with boron fiber($100{\mu}m$) and silicon carbide fibers($140{\mu}m$ and $15{\mu}m$) were investigated. Al-4.5wt%Cu and Al-l0wt%Mg were chosen for the matrix phase of the composites. In the squeeze cast specimen with high thermal difference between fiber and melt, the average secondary dendrite arm spacing(DAS) in reinforced alloy is smaller than that in unreinforced alloy. It was also observed that primary ${\alpha}$ and non-equilibrium eutectic, which seems to be penetrated and solidified at the final stage of the solidification of the matrix, are irregularly distributed around fibers. It is considered that cold fibers serve as heterogeneous nucleation site. While in the remelted and resolidified specimen without temperature difference, the DAS was not changed with reinforcement and microstructure reveals non-equilibrium eutectic with relatively uniform thickness around fibers. It might be evident the nucleation starts at interfiber region. Microsegregation decreases with the decrease in cooling rate and with reinforcement in the as-squeeze cast specimen. Al-10wt% Mg alloy shows less microsegregation than Al-4.5wt%Cu alloy.

• Advanced Composite Materials
• /
• 제18권4호
• /
• pp.381-394
• /
• 2009

The kinetics of centrifugal infiltration of fibrous tubular preform is built theoretically, and simulations are conducted to study the effects of various casting conditions on infiltration kinetics and macrosegregation by combining with the energy, mass and kinetic equations. A similarity way is used to simplify the one-dimensional model and the parameter is ascertained by an iterative method. The results indicate that the increase of superheat, initial preform temperature, porosity tends to enlarge the remelting region and decrease copper solute concentration at the infiltration front. Higher angular velocity leads to smaller remelting region and solute concentration at the tip. The pressure in the infiltrated region increase significantly when the angular velocity is much higher, which requires a stronger preform. It is observed that the pressure distribution is mainly determined by the angular velocity, and the macrosegregation in the centrifugal casting is greatly dependent on the superheat of inlet metal matrix, initial temperature and porosity of the preform, and the angular velocity.