• Korean Journal of Environmental Agriculture
• /
• v.13 no.1
• /
• pp.10-17
• /
• 1994

To investigate differences with the polluted sources on Cu contents in soils and paddy rices under water pollutions, soils with the distance, the surface(0-15㎝ depth) and subsurface(15-30㎝ depth) in 1982 and 1990, and rice plants at the soil sampling sites in 1990 were separately sample at Mangyeong River area under the influence of municipal and industrial waste water from Jeonju city. Soil samples were extracted with $4M-HNO_3$ and plant samples were digested with mixture of $HNO_3$ and $HClO_4$ for analyzing Cu, Cd, Zn, Pb by atomic absorption spectrophotometry. Cu contents in soils ranged from 5.20 to 71.70 mg $kg^{-1}$. Average Cu level in 1990 was higher than that in 1982. Variation of Cu content with the distances from the source of waste water in 1990 was more regularly decreased than that in 1982. A significant correlation was observed between Cu contents in leaf sheath of rice plant and Cu, Zn and Pb contents in soils. Cu contents in soil was correlated with Zn and Pb in soil at area affected by waste water, regardless of years and soil depths. Cu contents in brown rice ranged from 0.4 to 10 mg $kg^{-1}$, and it was the lowest in parts of rice plant, and Cu content in panicle axis was 2.3 times higher than that in brown rice.

• Proceedings of the Korean Magnestics Society Conference
• /
• 1993.11a
• /
• pp.106-107
• /
• 1993

• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.04a
• /
• pp.181.1-181
• /
• 2003

• Journal of Power System Engineering
• /
• v.18 no.5
• /
• pp.106-114
• /
• 2014

For the purpose of development of polyurethane sealing material, polyurethane resins reinforced with CuO were prepared from polyol and MOAC(4,4'-Methylenebis(2-chlorobenzeneamine)). And the effects of compositions on the mechanical properties of the reinforced polyurethane resin were experimentally examined. The polyurethane resin got to be thermally decomposed at $260^{\circ}C$ and completely carbonized around $500^{\circ}C$. Tensile strength, elongation and hardness of the polyurethane resin increased with the content of MOCA. CuO was uniformly dispersed in the polyurethane resin by 1 minute's ultrasonic radiation. Tensile strength, elongation and hardness of the polyurethane resin reinforced with CuO increased with the content of CuO. Tensile strength and hardness of the reinforced polyurethane resin increased with particle size of the CuO, but elongation decreased. CuO showed higher tensile strength and hardness than any other additives, and lowest elongation.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.1
• /
• pp.120-122
• /
• 2010

In this paper the effect of constituent content on superconductivity and phase in BiPbSrCaCuO system was reported. The zero resistance temperature reaches as high as 100k when dophant Sb was decreased dramatically with increasing Sb content in BiPbSrCaCuO system while the corresponding phase was changed fundamentally.

• Korean Journal of Soil Science and Fertilizer
• /
• v.26 no.4
• /
• pp.249-252
• /
• 1993

Water culture studies were conducted in the greenhouse with mulberry plants to investigate the nutrient uptake, especially Zn and Cu, under high phosphrous concentration. Mulberry plants were grown with five phosphorus levels(0, 0.2, 0.5, 2.0, 5.0 mM). Leaves and roots were analyzed for water content, total nitrogen, P, K, Ca, Mg, Fe, Mn, total Zn, soluble Zn, Cu, Cl, $NO_3HPO_4$ and $SO_4$. Dry matter increased upto 2.0mM phosphorus level, and then decreased. Water content, total nitrogen, P, K, and Fe in leaves increased with increasing phosphorus level. Total Zn content in leaves showed little change, whereas soluble Zn increased and Cu decreased with increasing phosphorus level. With increasing phosphous level. $SO_4$ and Cl decreased and then sharply increased above 2.0mM phosphorus. Lower uptake of Cu and higher uptake of $SO_4$ and Cl suggest a cause of mulberry yield decline with high accumulation of soil phosphorus.

• Journal of Korea Foundry Society
• /
• v.39 no.6
• /
• pp.103-109
• /
• 2019

Cu-added SKD11 was manufactured through the casting process and the effects of Cu addition with different contents (0, 1, 2 and 3 wt%) and aging treatment on microstructure, mechanical characteristics such as tensile strength and hardness, and thermal conductivity were investigated. The microstructure was analyzed by FE-SEM and XRD, the mechanical characteristics by Rockwell hardness tester and Tensile tester, and the thermal conductivity by Laser flash. As a result, SKD11 containing Cu had higher hardness than as-received SKD11. The hardness of as-cast SKD11 containing 1 wt% Cu was 42.4 HRC, whereas the hardness of asreceived SKD11 cast alloy was 19.5 HRC, indicating that the hardness was greatly improved when Cu was added. In the case of tensile strength, Cu-added SKD11 cast alloy had lower tensile strength than as-received SKD11, and the tensile strength tended to increase as Cu content increased. After heat treatment, however, tensile strength of as-received SKD11 was significantly increased, whereas in the case of Cu-added SKD11, as the Cu contents increased, the tensile strength increased less and even reduced at 3 wt% Cu. The thermal conductivity of Cu-added SKD11 cast alloy was about 13 W m^-1 K^-1, which was lower than that of the asreceived SKD11 cast alloy (28 W m^-1 K^-1). After the heat treatment, however, the thermal conductivity of as-received SKD11 was reduced, while the thermal conductivity of the SKD11 added with Cu was increased. Thermal conductivity was generally larger with less Cu content, and this tendency became more pronounced after heat treatment.

• Economic and Environmental Geology
• /
• v.23 no.2
• /
• pp.143-159
• /
• 1990

There is clear difference in content of the major and trace elements between Masan granites of Cu province and Yucheon-Eonyang granites of Pb-Zn province in the Yucheon Basin: the former has low content in K(2.08%), Na(2.42%) and Rb (127ppm), and high content in Ca(3.75%), Mg(1.42%) and Sr(304ppm) whereas the latter has high content in K(3.56-3.60%), Na(3.05-3.06%) and Rb(144-161ppm), and low content in Ca(0.62-0.96), Mg(0.21-0.26%) and Sr(136-157ppm). Ore metals in granites also show slight difference between two areas: Masan granites have slightly higher Cu content(18ppm) than Yucheon-Eonyang granites(13, 14ppm), whereas Yucheon granite(29ppm) has slightly higher Pb content than Masan granites(25ppm). Thus, it may be possible to apply geochemical difference of the granites to distinguish whether a Cretaceous granite mass is related to copper or lead-zinc mineralization, and whether it belongs Cu-province or Pb-Zn province in the Yucheon Basin.

• Journal of Korea Foundry Society
• /
• v.41 no.5
• /
• pp.411-418
• /
• 2021

In order to experimentally investigate the effect of Ni or Cu addition on microstructure and mechanical properties of high Si Solution Strengthened Ferritic Ductile cast Iron (SSF DI), a series of lab-scale sand casting experiment were conducted by changing initial concentration of Ni up to 3.0wt% or Cu up to 0.9wt% in the alloy. It was found that increase in Ni or Cu content in the alloy leads to increase in strength properties and hardness as well as decrease in ductility. The higher Ni or Cu content the SSF DI has, the higher fraction of pearlite was observed. At similar levels of Ni or Cu contents in the alloy, higher pearlite area fraction was observed in the Cu-containing SSF DI than that in the Ni-containing SSF DI. When the effect of the microstructure on the mechanical properties of Ni-containing SSF DI was considered, Ni-containing SSF DI was found to have excellent strength and hardness as well as good elongation when the pearlite fraction was controlled less than 10%. As the pearlite fraction in the Ni-containing SSF DI exceeds 10%, however, it shows drastic decrease in elongation. Meanwhile, gradual increase in strength and hardness, and decrease in elongation with respect to increase in pearlite fraction were observed in Cu-containing SSF DI. The different microstructure-mechanical property relationships between Ni-containing and Cu-containing SSF DI were due to the combined effect of the relatively weak pearlite stabilizing effect of Ni compared to that of Cu in high Si SSF DI, and matrix strengthening effect caused by the different amounts of those alloying elements required for similar pearlite fraction.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.22 no.3
• /
• pp.53-59
• /
• 2014

In this study, the sewage sludge dryer is installed before and after dehydration of the sludge and aqueous phase composition, the heavy metal content, and measurement and analysis were investigated. The removal efficiency of water content of sewage sludge was about 95.7% in the sewage sludge dryer. The removal efficiency of water content for primary dryer was designed for 35% of primary drying, secondary drying to remove the water content to 10%, but as the measurement revealed that 20.8% of primary drying, the second dryer 3.3% a better effect to the actual operation respectively. Before the installation of the sewage sludge dryer, the content of heavy metal was as follows, Cu:352~614 ppm, Hg: 1.3~1.44ppm, Cd : 1.1~1.86ppm, Pb : 17.25~ 28.93 ppm, As : 1ppm. And after the installation of the sewage sludge dryer, the content of heavy metal changed to as follows, Cu : 340~350 ppm, Hg : 0 ppm, Cd : 0~0.021 ppm, Pb : 0 ppm, As : 0~0.043 ppm which is Also below the legal limits. Also, the sewage sludge dryer produce 1/4 of the sewage sludge into dried sludge.