• Journal of the Korean Chemical Society
• /
• v.39 no.1
• /
• pp.66-70
• /
• 1995

The soil humic acid was subdivided into four subfractions by molecular weight (F1: >100.000 dalton; F2: >100.000 dalton; F3: >10.000 dalton; F4: >2.000 dalton) using MP-dual hollow fiber ultrafiltration system. The characterization using IR, 1H and 13C NMR spectroscopy, showed similar spectroscopic features of HA, demonstrating that the bulk properties of HA subfractions are very similar to one another. IR spectral data showed a decrease in polysaccharide contents and increase in carboxylate functionality as molecular weight become smaller.functions. The structure of (NO) can be described by two interactions (N${\cdot}{\cdot}{\cdot}$N, N${\cdot}{\cdot}{\cdot}$O). One is the ONNO structure with an (N${\cdot}{\cdot}{\cdot}$N) interaction. In this structure, acyclic cis-ONNO with $C_{2v}$-symmetry, acyclic trans-ONNO with $C_{2h}$, and cyclic ONNO with trapezoidal structure ($C_{2v}$) are optimized at the MP2 level. The other structure is the ONON structure with an (N${\cdot}{\cdot}{\cdot}$O) interaction. In the structure, acyclic cis-ONON with Cs$^{-symmetry}$ and cyclic ONON of the rectangular ($C_{2h}$), square $(D_{2h})$, rhombic $(D_{2h})$, and parallelogramic $(D_{2h})$ geometries are also optimized. It is found that acyclic cis-ONNO $(^1A_1$) is the most stable structure and cyclic ONNO ($^3A_1$) is the least stable. Acyclic trans-ONNO ($^3A_1$) with an (N${\cdot}{\cdot}{\cdot}$N) interaction, acyclic trans-ONON and bicyclic ONON $(C_{2v})$ with (N${\cdot}{\cdot}{\cdot}$O) interaction, and acyclic cis- and trans-NOON with an (O${\cdot}{\cdot}{\cdot}$O) interaction can not be optimized at the MP2 level. Particularly, acyclic trans-ONNO with $C_{2h}$-symmetry can not be optimized at the CCSD(T) level. Meanwhile, acyclic NNOO ($^1A_1$, $C_s)$ and trianglic NNOO ($^1A_1$,$C_{2v})$ formed by the (O${\cdot}{\cdot}{\cdot}$N) interaction between $O_2$and $N_2$are optimized at the MP2 level. The binding energies and the relative energy gaps among the isomers are found to be relatively small./sec. Spiral CT scans during the arterial phase were obtained 35 seconds after the injection of contrast medium. CT findings of 78 lesions less than 4cm in diameter were correlated with angiographic findings. Results : The attenuation of lesions was high(n = 69), iso(n = 5), and low(n = 4) compared with liver parenchyma during the arterial phase of spiral CT. In lesions with high-, iso-, and low-attenuation during the arterial phase of spiral CT, hypervascularity on angiograms was found in 63 of 69(91.3%), three of five(60%), and three of four lesions(75%), respectively. Six lesions with high-attenuation on the arterial phase of spiral CT were not seen on angiography. Two iso-attenuated and one low-attenuated lesion were hypovascular on angiograms. Conclusion : The results of this study suggest that with some exceptions there was good correlation between the arterial phase of spiral CT and angiography.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.14 no.2
• /
• pp.164-170
• /
• 1985

Yellowish modified wool, dithiocarbamate(DTC) wool, was synthesized by partial hydrolysis in 0.2 N-NaOH reacting with carbon disulfide to use as ${\alpha}-amylase$ immobilization matrix. ${\alpha}-amylase$ was immobilized reacting with sulfide group of DTC-wool by covalent binding within 1 hour. 0.5 gram of this preparation, $DTC-wool-{\alpha}-amylase$, contained 150 ug of enzyme protein and its specific activity was about 90% of the native one. General properties of $DTC-wool-{\alpha}-amylase$ were a little different from optimum temperature, optimum pH, heat stability, kinetic constants and activation energy. An apparent Michaelis constant and maximum velocity of $DTC-wool-{\alpha}-amylase$ were 5.56 mg/ml and 0.37 mg/ml. $min^{-1}$ respectively, while activation energy was 16.6 kcal/mole.

• Journal of Ginseng Research
• /
• v.1 no.1
• /
• pp.33-50
• /
• 1976

As a continuation of series of works on the pharmacological actions of Panax ginseng. three kinds of behavioral experiments were carried out using rats and mice. The occurrence of component Posterns of general behavioral activity in rat was examined by visual scanning using the ting sample method in the ad lib. And he hunger deprivated situation. In normal ad lib. situation, the eating behavior of rat treated with 100mg/kg of ginseng saponin was significantly more frequent than that of saline control at the night and throughout the 24 hr period. But grooming was less frequent than the control at the same period. In the hunger situation followed by 90~120 hrs of feed deprivation, the locomotive activity and rearing awe significantly more often and sleeping was less frequent in the two dosage g roups of ginseng saponin (10 and 100 mg/kg) than in the saline group though out the observation period. Training of avoidance conditioning in rats was done in a two-way shuttle box. The number of conditioned response (CR) in which the animal avoided sucessfully an electric shock by running in to the other compartment of the hex was regarded as an index of learning performance. Ginseng saponin in doses of 2.5 mg/kg Produced a significantly increased CR in total avoidance tria1s compared with the control. Although other dosage groups of ginseng saponin (5.0, 50mg and 100 mg/kg) showed no significant statistical difference from the normal control, it tended to increase in CR in the ginseng groups than in the control. An aggressive behavior in mice was observed in n shock-generating fighting box. The occurrence of reflexive fighting between two animals induced by an electric shock applied to the feet war checked as an index of aggression. The occurrence of reciprocal fighting episode immediately after the onset. Of the shock was significantly decreased in the dosage group of 400 mg/kg ginseng saponin, but it did net differ in the 100 mg/kg group of ginseng saponin from the control group. The dose, 400 mg/kg of ginseng saponin, inhibited fighting behavior in more than 80% of the Pairs. but 100 mg/kg of ginseng did inhibit it in less than 20% of the pairs.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.6
• /
• pp.1060-1067
• /
• 2001

Effect of various thickening agents on kakdugi fermentation was investigated by measuring physicochemical and sensory properties during fermentation at 2$0^{\circ}C$. Paste of seven kinds of thickening agents (wheat flour (WF), waxy rice flour (WR), corn starch (CS), acid modified starch (AM), aretylated distarch adipate (AA), hydroxypropyl distarch phosphate (PP) and xanthan gum (XG) ) at 0.25% concentration was added to kakdugi. Total acidity during fermentation was not different among thickening agents, but slightly lower in XG than control at the 7th day of fermentation. At 0 day of fermentation, free sugar amount were higher in thickening agent addition groups than control, but rapidly decreased to below control at the 7th day of fermentation, except XG. Glucose and fructose which were the major free sugars, decreased rapidly during fermentation, whereas mannitol increased in all samples. Viscosity of kakdugi liquid was much higher in thickening agent addition groups than control at 0 day of fermentation, but rapidly decreased from 1 day of fermentation. However, initial viscosity was maintained only in XG. Hardness at the 7th day of fermentation was higher in WR, PP, XG than control. The result of sensory evaluation shows that there were no significant difference in sour odor, sour taste and savory taste among samples. Moldy odor was higher in WR, WF and AM, but was not significantly different in XG, PP, AA compared to control. Viscosity of XG and PP, and starchy taste of XG were higher than those of control. Overall preference of XG, AM, PP were not significantly different from that of control. Xanthan gum was considered to be a good thickening agent for kakdugi but it is necessary to find a minimum concentration for kakdugi since starch taste of xanthan gum.

• The Journal of the Petrological Society of Korea
• /
• v.6 no.1
• /
• pp.19-33
• /
• 1997

This study reports the results about the petrography and geochemical characteristics of 10 representative volacanic rocks. The Cretaceous volcanic rocks distributed in the vicinity of the Kageo island composed of andesitic rocks, dacitic welded tuff, and rhyolitic rocks in ascending order. Sedimentary rock is the basement in the study area covered with volcanic rocks. Andesitic rocks composed of pyroclastic volcanic breccia, lithic lapilli tuff and cryptocrystallin lava-flow. Most dacitic rocks are lapilli ash-flow welded tuff. Rhyolitic rocks consists of rhyolite tuff and rhyolite lava flow. Rhyolite tuff are lithic crystal ash-flow tuff and crystal vitric ash-flow tuff with somewhat accidental fragments of andesitic rocks, but dacitic rocks. The variation of major and trace element of the volcanic rocks show that contents of $Al_2O_3$, FeO, CaO, MgO, $TiO_2$ decrease with increasing of $SiO_2$. On the basis of Variation diagrams such as $Al_2O_3$ vs. CaO, Th/Yb vs. Ta/Yb, and $Ce_N/YB_N$ vs. $Ce_N$, these rocks represent mainly differentiation trend of calc-alkaline rock series. On the discriminant diagrams such as Ba/La and La/Th ratio, Rb vs. Y + Nb, the volcanic rocks in study area belongs to high-K Orogenic suites, with abundances of trace element and ternary diagram of K, Na, Ca. According to the tectonic discriminant diagram by Wood, these rocks falls into the diestructructive continental margin. K-Ar ages of whole rocks are from andesite to rhyolite $97.0{\pm}6.8~94.5{\pm}6.6,\68.9{\pm}4.8,\61.5{\pm}4.9~60.7{\pm}4.2$ Ma, repectively. Volcanic rocks in study area show well correlation to the Yucheon Group in terms of rock age dating and geochemcial data, and derived from andesitic calc-alkaline magma that undergone low pressure fractional crystallization dominated plagioclase at <30km.

• Journal of Korea Water Resources Association
• /
• v.40 no.11
• /
• pp.887-898
• /
• 2007

A physically based semi-distributed model, SWAT was applied to the Chungju Dam upstream watershed in order to investigate the spatial and temporal characteristics of watershed sediment yields. For this, general features of the SWAT and sediment simulation algorithm within the model were described briefly, and watershed sediment modeling system was constructed after calibration and validation of parameters related to the runoff and sediment. With this modeling system, temporal and spatial variation of soil loss and sediment yields according to watershed scales, land uses, and reaches was analyzed. Sediment yield rates with drainage areas resulted in $0.5{\sim}0.6ton/ha/yr$ excluding some upstream sub-watersheds and showed around 0.51 ton/ha/yr above the areas of $1,000km^2$. Annual average soil loss according to land use represented the higher values in upland areas, but relatively lower in paddy and forest areas which were similar to the previous results from other researchers. Among the upstream reaches, Pyeongchanggang and Jucheongang showed higher sediment yields which was thought to be caused by larger area and higher fraction of upland than other upstream sub-areas. Monthly sediment yields at the main outlet showed same trend with seasonal rainfall distribution, that is, approximately 62% of annual yield was generated during July to August and the amount was about 208 ton/yr. From the results, we could obtain the uniform value of sediment yield rate and could roughly evaluate the effect of soil loss with land uses, and also could analyze the temporal and spatial characteristics of sediment yields from each reach and monthly variation for the Chungju Dam upstream watershed.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.16 no.2
• /
• pp.183-193
• /
• 2018

Currently, the Korea Atomic Energy Research Institute (KAERI) is planning to build the Ki-Jang Research Reactor (KJRR) in Ki-Jang, Busan. It is important to safely dispose of low-level radioactive waste from the operation of the reactor. The most efficient way to treat radioactive waste is cement solidification. For a radioactive waste disposal facility, cement solidification is performed based on specific waste acceptance criteria such as compressive strength, free-standing water, immersion and leaching tests. Above all, the leaching test is important to final disposal. The leakage of radioactive waste such as $^{137}Cs$ causes not only regional problems but also serious global ones. The cement solidification method is simple, and cheaper than other solidification methods, but has a lower leaching resistance. Thus, this study was focused on the development of cement solidification for an enhancement of cesium leaching resistance. We used Zeolite and Loess to improve the cesium leaching resistance of KJRR cement solidification containing simulated KJRR liquid waste. Based on an SEM-EDS spectrum analysis, we confirmed that Zeolite and Loess successfully isolated KJRR cement solidification. A leaching test was carried out according to the ANS 16.1 test method. The ANS 16.1 test is performed to analyze cesium ion concentration in leachate of KJRR cement for 90 days. Thus, a leaching test was carried out using simulated KJRR liquid waste containing $3000mg{\cdot}L^{-1}$ of cesium for 90 days. KJRR cement solidification with Zeolite and Loess led to cesium leaching resistance values that were 27.90% and 21.08% higher than the control values. In addition, in several tests such as free-standing water, compressive strength, immersion, and leaching tests, all KJRR cement solidification met the waste acceptance or satisfied the waste acceptance criteria for final disposal.

• Restorative Dentistry and Endodontics
• /
• v.35 no.2
• /
• pp.88-95
• /
• 2010

The purpose of this study was to compare the root canal shaping ability of 4 rotary NiTi instruments in simulated root canals. For the preparation of thirty two curved root canals, Mtwo instruments using "single length"technique, and Profile, ProTaper Universal, and K3 using crown-down technique (N = 8) were used. All canal samples were prepared by reaching an apical canal size of #30. Pre- and post-instrumentation digital images were recorded and an assessment of canal shape was determined using a computer image analysis program SigmaScan Pro (Systat Software Inc., San Jose, CA, USA). The changes of the dimension of inner walls of canals, (2) the changes of the dimension of outer walls of canals, and (3) the centering ratio were measured at 7 measuring points, and then data were statistically analyzed using one-way ANOVA and Duncan's test. The results were as below; 1. The root canal shaping ability of Profile was significantly faster than that of other rotary NiTi instruments (p < 0.05). 2. The deformation and fracture of all instruments used for this study were not experienced. 3. In the degree of changes of the dimension of inner walls of canals, Profile demonstrated the lowest changes of the dimension of inner walls of canals except at the measuring points of the 1 and 2 mm (p < 0.05). However, the ProTaper Universal showed the highest changes of the dimension of inner walls of canals at all measuring points (p < 0.05). 4. In the degree of changes of the dimension of outer walls of canals, Mtwo demonstrated the lowest changse of the dimension of outer walls of canals except at the measuring point of the 1 mm (p < 0.05). However, Profile exhibited the highest changes of the dimension of outer walls of canals at the measuring points of 3 and 4 mm and ProTaper Universal and K3 showed the largest changes of the dimension of outer walls of canals at the measuring points of 1, 2, 6, and 7 mm (p < 0.05). 5. In degree of centering ratio, Profile demonstrated the least centering ratio comparing with the centering ratio shown by other NiTi instruments at the measuring points of 1, 4, 5, and 6 mm. Results suggest that in the coronal part of canal preparation, active cutting files such as ProTaper Universal may efficiently flare the canal orifice and form a better taper, and in the apical part of the canal, files which have a better centering ability such as Profile may maintain the original canal curvature and reduce the shaping time.

• Radiation Oncology Journal
• /
• v.13 no.3
• /
• pp.259-266
• /
• 1995

Purpose : The aim of this study is to analyze the survival rate, treatment failure and complication of radiation therapy alone in stage III uterine cervical cancer. Materials and Methods : From January 1980 through December 1985, 227 patients with stage III uterine cervical cancer treated with radiation therapy at Kosin Medical Center were retrospectively studied. Among 227 patients, 72 patients($317{\%}$) were stage IIIa, and 155 patients($68.3{\%}$) were stage IIIb according to FIGO classification. Age distribution was 32-71 years (median: 62 years). Sixty nine patients($95.8{\%}$) in stage IIIa and 150 patient ($96.8{\%}$) in stage IIIb were squamous cell carcinoma. pelvic lymph node metastasis at initial diagnosis was 8 patients($11.1{\%}$) in stage IIIa and 29 patients($18.7{\%}$) in stage IIIb, Among 72 patients with stage IIIa, 36 patients ($50{\%}$) were treated with external radiation therapy alone by conventional technique (180-200 cGy/fr.) and 36 patients($50{\%}$) were treated with external radiation therapy with intracavitary radiotherapy(ICR) with $Cs^{137}$ sources, and among 155 patients with stage IIIb, 80 patients ($51.6{\%}$) were treated with external radiation therapy alone and 75 patients ($48.4{\%}$) were treated with external radiation therapy with ICR. Total radiation doses of stage IIIa and IIIb were 65-105 Gy(median: 78.5 Gy) and 65-125.5 Gy (median 83.5 Gy). Survival rate was calculated by life-table method. Results : Complete response rates were $58.3{\%}$(42 patients) in stage IIIa and $56.1{\%}$(87 patients) in stage IIIb. Overall 5 year survival rates were $57{\%}$ in stage IIIa and $40{\%}$ in stage IIIb. Five year survival rates by radiation technique in stage IIIa and IIIb were $64{\%},\;40{\%}$ in the group treated in combination of external radiation and ICR, and $50\%,\;40\%$ in the group of external radiation therapy alone(P=NS). Five year survival rates by response of radiation therapy in stage IIIa and IIIb were $90\%,\;66\%$ in responder group and $10\%,\;7\%$ in non-responder group (P<0.001) There were statistically no significant differences of 5 year survival rate by total radiation doses and external radiation doses(40 Gy vs 50 Gy) of whole or true pelvis in stage IIIa and IIIb(P=NS). Treatment failures rates were $40.3\%$(29 patients) in stage IIla and $57.4\%$(89 patients) in stage IIIb. 17 patients ($23.6\%$) in stage IIIa and 46 patients ($29.7\%$) in stage IIIb experienced complications. Total radiation doses more than 85 Gy produced serious complication in both stage IIIa($50\%$) and IIIb($50\%$). Serious complication rates were higher in group received external radiation doses of 50 Gy than 40 Gy to whole or true pelvis in stage IIIa and IIIb. Serious rectal complication developed in rectal doses more than 65 Gy, and serious bladder complication developed in bladder doses more than 75 Gy. Major cause of death was cachexia due to locoregional failure in both stage IIIa($34.7\%$) and IIIb($43.9\%$). Conclusion : From this study, we found that external radiation therapy with ICR was found to have a tendency to be superior to external radiation therapy alone in survival rate, local control rate and complication rate but not different in statistics, and external radiation doses of 50 Gy than 40 Gy to whole or true pelvis produced serious rectal and bladder complications in stage III uterine cervical cancer.

• Journal of Animal Environmental Science
• /
• v.13 no.3
• /
• pp.211-218
• /
• 2007

This study was carried out to develop the technique for manufacturing activated carbon from livestock manure and to analyse it's odor absorptiveness. Each of layer manure(LM), litter from broiler house(BL) and litter from dairy barn(DL), compost from layer manure(LC) and pig manure(PC), and coconut shell(CS) was used as a raw material. Activated carbon by grinding the raw material, adding the coal tar as a binder, palletizing, drying, heating with $N_2$ gas at $400^{\circ}C$ for 1 hour, activating by reaction with steam at a temperature of $750^{\circ}C$ for 1 hour. Moisture contents of raw material was 44.9% in layer compost, 71.9% in layer manure, 24.4% in broiler litter, 47% in pig manure compost and 33.9% in dairy litter. Volatile matter in layer compost, layer manure, broiler litter, pig manure compost and dairy litter was 18.8%, 31.0%, 49.8%, 22.3% and 11.6%, respectively. Surface area(BET) of activated carbon from layer compost, layer manure, broiler litter, pig manure compost, dairy litter and coconut shell was 259.8, 209.8, 63.5, 442.3, 812.9 and $1,040\;m^2/g$, respectively. Activated carbon made by livestock manure or litter were examined with scanning electron microscope, and micropore was a type of sponge like particles honeycombed with chambers. Pore size of activated carbon was ranged from 0.39 to $5.02\;{\AA}$, but coconut shell was $0.30\;{\AA}$. Iodine absorptiveness of activated carbon from livestock manure was $530{\sim}580mg/g$. But activated carbon made by coconut shell was 1000 mg/g. Each activated carbon could absorb odor compound very well. Absorptiveness of activated carbon from layer manure for hydrogen sulfide and trimethyl amino was 74.5% and 73.9% at the accumulated flux of 60,000 ml, but, in the case of ammonia was only 15.2% at the accumulated flux of 10,000 ml