• 제목/요약/키워드: Crust Formation

검색결과 73건 처리시간 0.02초

Effect of Flooding and Soil Salinity on the Growth of Yam (Dioscorea batatas) Transplanted by Seedling of Aerial Bulblet in Saemangeum Reclaimed Tidal Land

  • Sohn, Yong-Man;Song, Jae-Do;Jeon, Geon-Yeong;Kim, Doo-Hwan;Park, Moo-Eon
    • 한국토양비료학회지
    • /
    • 제44권1호
    • /
    • pp.8-14
    • /
    • 2011
  • The effect of flooding and soil salinity on the growth of yam (Dioscorea batatas) were studied on the experimantal site temporally established in the south-eastern part of Saemangeum Reclaimed Tidal Land (near Gwanghwal myun, Gimjae-gun, Jellabukdo, Korea). Yam seedlings planted by using aerial bulblet as alternative of sliced tubers, were grown for 20-days and transplanted in black-vinyl mulched ridges (about 20 cm in height) at 70cm interval by $20{\times}60cm$ spacing in the $4^{th}$ of May, 2010. Soil salinity was maintained at lower than 1.2 ds $m^{-1}$ during the growing period and did not result to salt injury in all plants. However, flooding injury very seriously led to plant death and plant mortality rates at $67{\pm}21$ and $82{\pm}9%$ of yam plants in the compost and no compost treatment, respectively, died by heavy flooding during the rainy summer season. The main reasons of the flooding injury included the decreased rainfall acceptable capacity (RAC) after the rising of water table and a slowdown of water infiltration rate after the formation of an impermeable soil crust in the furrow bottom with continuous and heavy downpour during the rainy summer season. The effect of compost treatment was not statistically observed because of the severe spatial difference caused by wet injury, although yam tuber yield was higher at 30 kg $10^{-1}$ in the compost treatment than in the no-compost treatment at 20 kg $10^{-1}$. However, the size of tuber ranged at 1.23 to 1.60 cm in diameter and 3.7 to 5.0 cm in length in all both treatment, which means they are still reproducible for the next cropping season. Conclusively, proper counter-flooding measure and soil salinity control critically important for successful yam production in Saemangeum Reclaimed Tidal Land.

충주지역 희토류 광상의 성인: 산출상태와 지화학적 특성 (Genesis of the REE Ore Deposits, Chungju District, Korea: Occurrence Features and Geochemical Characteristics)

  • 박맹언;김근수
    • 자원환경지질
    • /
    • 제28권6호
    • /
    • pp.599-612
    • /
    • 1995
  • Some REE ore deposits are located in the middle part the of Korean peninsula. Geotectonically, the REE ore deposits situated on the Kyemyeongsan Formation of northern margin of the Okcheon geosynclinal belt and in the transitional zone between Kyeonggi massif and the Okcheon belt, with a deep-seated fracture separating the two tectonic units. The Kyemyeongsan Formation are different in lithology and metamorphic grade from the Gyeonggi massif and the Okcheon super group. The sequence of Kyemyeongsan Formation is dominantly composed of acidic metavolcanic and volcaniclastic rocks associated with alkaline igneous rocks which are related to volcano-plutonism. The REE ore deposits contain mainly Ce-La, Ta-Nb, Y, Y-Nd and Nd-Th group minerals. More than 15 RE and REE minerals have been found in the deposits, such as allanite, fergusonite, thorite bestnaesite, euxenite, polyclase, monazite, columbite, (Nb)-rutile, okanoganite, sphene, zircon, illmenite and some other unknown minerals. According to the characteristics of the mineral association, the REE ore deposits may be divided into 4 ore types; Zircon-REE, allanite-REE, feldspar-REE and fluorite-REE type. The Sm-Nd isochron age of the REE ore is 330 Ma, and the Sm-Nd model age is 1.11 Ga with ${\varepsilon}_{Nd(t)}$ being - 2.9. This data suggest that the REE ore deposit was formed in the early Carboniferous, and the ore-forming material came from the mantle. The REE ores show distinct light REE enrichment with strong negative Eu anomaly. The REE patterns of schistose rocks from Kyemyeongsan Formation are similar to felsic volcanics from rifts or back arc basins in or near continental crust. The genesis of the REE ore deposit is quite complicated. Different geologic processes are displayed in the studied area; sedimentation, volcanic activity, metamorphism and hydrothermal replacement. Alkali granite has suffered extensive post-magmatic metasomatism of a high temperature to produce alkali metasomatites. Geochemical charateristics show that metasomatism of alkaline fluid was probably the dominant ore-forming process in Chungju district.

  • PDF

Pain clinic에서의 임상경험(臨床經驗) (Clinical Experiences at Pain Clinic)

  • 김인현;안동애;임경임
    • The Korean Journal of Pain
    • /
    • 제1권1호
    • /
    • pp.3-8
    • /
    • 1988
  • Authors have experienced the treatment for the uppermost frequent cases, herpes zoster, frozen shoulder and low back pain among those who visited our pain clinic. 1. Herpes zoster The Patients who received the treatment within 4 weeks of the onset of the disease, not only healed herpes without leaving post herpetic neuralgia but also crust formation was fast. 2. Frozen shoulder Over 90% of the patients who received suprascapular nerve block accompanied with trigger points electric stimulation was very efficient procedure, futhermore, authors felt keenly the necessity each patients co-operation and individual endurance for this treatment. 3. Low back pain An epidural steroid administration to the patients who did not have any organic disturbances was effective treatment. If this non-effective, search other cause of the disease or operation was advisable one.

  • PDF

Possibility of S, O, Si and K in the Earth's Core Composition and its Problems

  • Lee, Han-Yeang
    • 한국지구과학회지
    • /
    • 제25권1호
    • /
    • pp.48-51
    • /
    • 2004
  • The light element candidates such as S, O, Si, and K are discussed for the reasonable compositions in the earth's core since the available data show density difference from pure iron core. These candidates are favored by the some evidences such as depletion in the crust and mantle, and lower eutectic temperature of Fe-FeS melt for sulfur. FeO phase for oxygen, lighter mass than sulfur and solubility in metallic phases for silicon, and partitioning in Fe-FeS melt for potassium. However, other problems such as short experimental data, initial compositions of these elements, and oxidation state during the formation of the earth should be solved simultaneously to confirm these light elements.

Genesis of two contrasting metallogenic provinces in the Cretaceous Gyeongsang Basin, Korea

  • Park, Seon-Gyu;Lee, Sang-Yeol;So, Chil-Sup;Ryu, In-Chang;Wee, Soo-Meen;Park, Sang-Hoon;Heo, Chul-Ho
    • 대한자원환경지질학회:학술대회논문집
    • /
    • 대한자원환경지질학회 2003년도 춘계 학술발표회 논문집
    • /
    • pp.184-185
    • /
    • 2003
  • The Cretaceous magmatism in the Gyeongsang Basin, which intruded into the upper crust or extruded throughout ENE-trending volcanic belts in southern Korea, led to the formation of two contrasting metallogeinic provinces: the Haman-Gunbug-Goseong and the Euiseong. The Haman-Gunbug-Goseong metallogenic province in the southwestern portion of the Gyeongsang Basin consists of dominantly nonmarine sedimentary rocks (e.g., the Sindong and Hayang groups) which are rarely intercalated with andesitic pyroclastics and flows. (omitted)

  • PDF

상압에서 부탄올 젤 연료액적의 증발특성 (Evaporation Characteristics of a Butanol Gel-Fuel Droplet in Atmospheric Pressure Condition)

  • 남시욱;김혜민
    • 한국분무공학회지
    • /
    • 제26권2호
    • /
    • pp.73-80
    • /
    • 2021
  • Evaporation characteristics of single butanol gel fuel were investigated in different mass ratios of gellant and ambient temperatures. Gel fuel was made by adding the pure water and hydroxypropylmethyl cellulose (HPMC) into the 1-butanol. Increase of viscosity was observed when the loading of HPMC increased. The evaporation process of gel droplet could be divided into three stages: droplet heating, micro-explosion and crust formation. Elevation of ambient temperature helped boost the evaporation in all experimental cases, but the effect was mitigated when the mass ratio of HPMC increased. Increase of HPMC weight ratio reduced the evaporation rate.

표면처리에 따른 Hastelloy X 합금의 고온물성 (High temperature properties of surface-modified Hastelloy X alloy)

  • 조현;이병우
    • 한국결정성장학회지
    • /
    • 제22권4호
    • /
    • pp.183-189
    • /
    • 2012
  • 고온 열수송용 재료로 이용되는 Hastelloy X의 표면처리에 따른 고온물성 개선에 대한 연구를 수행하였다. Hastelloy X 기판 상에 각각 PVD법인 Arc discharge 및 Sputtering을 이용하여 TiAlN 및 $Al_2O_3$ 박막을 표면 코팅(overlay coating) 하였고, 분위기 분말을 이용하여 Al을 금속표면을 통해 확산시키는 방법인 Pack cementation법을 이용한 Al 확산코팅(diffusion coating: aluminiding)법을 이용한 표면처리를 수행하였다. 이들 표면처리가 Ni-Cr계 합금의 고온열처리에서 생성되는 두꺼운 불균질 산화물($Cr_2O_3$)형성 억제에 미치는 효과와 조성 및 표면미세구조가 물성에 미치는 영향에 대해 알아보기 위해, 표면처리 된 Hastelloy X 샘플들을 공기 및 헬륨가스 분위기에서 $1000^{\circ}C$로 열처리 하였으며, 열처리된 전후 시편들에 대해 상형성, 미세구조 및 고온 물성 변화를 측정하였다. 이러한 실험결과를 통하여 표면코팅법에 의한 TiAlN 및 $Al_2O_3$ 박막에 비해 Al 확산코팅한 경우 두꺼운 불균질 산화물($Cr_2O_3$)형성이 억제되어 보다 균질한 미세구조와 높은 내마모성 등 높은 고온 안정성을 보여주는 것을 확인할 수 있었다.

울릉분지와 동해 해산의 기원과 발달과정에 대한 해양지구물리학적 연구 (Marine Geophysical Constraints on the Origin and Evolution of Ulleung Basin and the Seamounts in the East Sea)

  • 김진호;박수철;강무희;김경오;한현철
    • 자원환경지질
    • /
    • 제38권6호
    • /
    • pp.643-656
    • /
    • 2005
  • 동해는 일본분지, 야마토 분지, 울릉분지 등 큰 3개의 해양분지와 크고 작은 고지대(topographic hihgs) 등으로 구성되어 있고, 주변해(marginal sea) 또는 후배호 분지 (back-arc basin)로 분류되며 태평양판, 필리핀판 등이 주변해 위치하고 있다. 동해의 남서쪽에 위치한 울릉분지는 평균수심 약 1500 미터, 최대수심 약 2500 미터를 보이며, 2000 미터 등 심선을 따라 동해의 일본 분지와 연결되어 있다. 분지 내에서 해저면 경사는 대체적으로 서쪽이 크게 나타나며, 남쪽과 동쪽의 경사는 이에 비하여 상대적으로 작게 나타난다. 지진계(OBS) 자료와 탄성파 자료 등에 의해 밝혀진 울릉분지의 지각 두께는 북쪽으로 그리고, 한국 연안 쪽으로 갈수록 두꺼워지는 경향을 보이며, 퇴적물의 두께는 울릉분지 남서쪽으로 갈수록 점차 두꺼워져 최대 약 12km에 이른다 울릉분지의 지각은 열개된 대륙지각(rifted continental crust), 신장된 대륙지각, 해저확장 초기단계에 형성된 해양지각 등 다양하게 제시되고 있으나 현재까지 구체적 증거는 없다. 수심 및 중력자료에 의하면, 울릉분지의 축은 북서-남동 방향으로 발달하고 있다. 또한, 후리에어-이상의 분포도 수심 자료와 유사하게 북서-남동 방향의 축을 중심으로 대칭성을 보이고 있으며, 퇴적물의 두께 분포 역시 북서쪽에서 남동 방향으로 진행하면서 일반적으로 두꺼워지는 양상을 보이고 있다. 울릉분지가 상대적으로 절은 연령에 해당하는 지각임에도 불구하고, 전체적으로는 후리에어-이상 값이 $-40\~50mGal$ 정도의 낮은 특징을 보이는데 이것은 울릉분지를 구성하는 지각과 퇴적물의 밀도가 일본분지와 야마토 분지를 구성하는 물질에 비하여 상대적으로 낮다는 것을 의미한다.나타났고, 이에 대한 적극적인 대안으로 의사와 간호사를 위한 교육프로그램 개발과 교육이 절실히 필요한데 일시적이고 일회적인 교육보다는 지속적이고 장기적이고 자동적으로 운영되는 체계가 필요하다.후 32.4$\pm$4.4, 32.1$\pm$4.5, 술 후 1일에 33.4$\pm$5.0, 31.7$\pm$5.1였다(repeated measures ANOVA, p < 0.05). 술 후 출혈량(mL)은 RAP군과 대조군에서 술 후 6시간에 357.2$\pm$ 177.1, 411.7 $\pm$ 279.5, 술 후 24시간에 599.4$\pm$145.6, 678.8 $\pm$256.4였다(t-test, p < 0.05). 동종 수혈은 RAP군에서 34명 중 7명에서(20.6$\%$), 대조군에서는 46명중 16명에서(34.8$\%$) 시행되어, RAP군에서 유의하게 빈도가 낮았다(Chi-square test, p < 0.05). 결론: 역행성 자가 충전법은 심폐바이패스의 충전에 의한 혈액희석을 최소화함으로서, 개심술 후 출혈과 동종수혈을 또한 줄이는 데 효과적인 방법이 될 수 있다고 생각된다.타내지 않았다.성 교사, 가정 전공 교사가 그렇지 않은 교사보다 해석적, 해방적 행동목표를 더 중요하게 인식하고 있었다. 특히 가정교육 철학을 배운 경험이 있는 교사가 그렇지 않은 교사보다 해방적 행동체계 목표를 중요시하는 것으로 나타났다. 이 연구 결과는, 실천 비판적인 가정 교과의 본질을 구현하기 위해서는 주생활 영역의 교육과정에 기술적, 해석적, 해방적 행동에 대한 목표들을 고루 포함하여야 하며 특히

The Effect of Coolant Boiling on the Molten Metal Pool Heat Transfer with Local Solidification

  • Cho, Jea-Seon;Kune Y. Suh;Chung, Chang-Hyun;Park, Rae-Joon;Kim, Sang-Baik
    • Nuclear Engineering and Technology
    • /
    • 제32권1호
    • /
    • pp.34-45
    • /
    • 2000
  • This study is concerned with the experimental test and numerical analysis of the heat transfer and solidification of the molten metal pool with overlying coolant with boiling. In the test, the metal pool is heated from the bottom surface and coolant is injected onto the molten metal pool. Experiments were performed by changing the test section bottom surface temperature of the metal layer and the coolant injection rate. The two-phase boiling coolant experimental results are compared against the dry test data without coolant or solidification of the molten metal pool, and against the crust formation experiment with subcooled coolant. Also, a numerical analysis is performed to check on the measured data. The numerical program is developed using the enthalpy method, the finite volume method and the SIMPLER algorithm. The experimental results of the heat transfer show general agreement with the calculated values. The present empirical test and numerical results of the heat transfer on the molten metal pool are apparently higher than those without coolant boiling. This is probably because this experiment was performed in concurrence of solidification in the molten metal pool and the rapid boiling of the coolant. The other experiments were performed without coolant boiling and the correlation was developed for the pure molten metal without phase change.

  • PDF

Coolant Material Effect on the Heat Transfer Rates of the Molten Metal Pool with Solidification

  • Cho, Jae-Seon;Kune Y. Suh;Chung, Chang-Hyun;Park, Rae-Joon;Kim, Snag-Baik
    • 한국원자력학회:학술대회논문집
    • /
    • 한국원자력학회 1998년도 춘계학술발표회논문집(1)
    • /
    • pp.812-817
    • /
    • 1998
  • Experimental studies on heat transfer and solidification of the molten metal pool with overlying coolant with boiling were performed The simulant molten pool material is tin (Sn) with the melting temperature of 232$^{\circ}C$. Demineralized water and R113 are used as the working coolant. This work examines the crust formation and the heat transfer characteristics of the molten metal pool immersed in the boiling coolant. The Nusselt number and the Rayleigh number in the molten metal Pool region of this study are compared between the water coolant case and the R113 coolant case. The experimental results or the water coolant are higher than those for R113. Also, the empirical relationship of the Nusselt number and the Rayleigh number is compared with the literature correlations measure from mercury. The present experimental results are higher than the literature correlations. It is believed that this discrepancy is caused by the effect of heat loss to the environment on the natural convection heat transfer in the molten pool.

  • PDF