• Journal of Korean Society of Forest Science
• /
• v.107 no.4
• /
• pp.412-421
• /
• 2018

The objective of this study was to analyze the effects of forest management activities on canopy fuel characteristics for Pinus densiflora stands in South Korea. We used 1,085 managed stands data and 349 unmanaged stands data of the National Forest Inventory for this study, and it was estimated by using the Weibull function for the growth of stand and canopy fuel characteristics. Comparing the canopy fuel characteristics for the managed stands and unmanaged stands shows that the average canopy fuel load is about 14% higher than that of managed stands, and the canopy bulk density is also approximately 16% higher. The results of comparing growth projections for 40 years, 50 years and 60 years with the Weibull function are as follows: Over time, managed stands was predicted the maximum number of medium and large class diameter, while unmanaged stands was predicted maximum number of small and medium class diameter. From a fire fuel perspective, unmanaged stands are predicted to be of the type small class diameter and high density, which is a good condition for crown fire. In addition, Canopy fuel load, Canopy bulk density is relatively higher than managed stands, indicating that the possibility of high crown fire hazard.

• Journal of Forest and Environmental Science
• /
• v.39 no.2
• /
• pp.73-80
• /
• 2023

Little is known of the life history of Garcinia kola; the objective of this study, therefore, was to assess the fruiting age and tree size of the species in a coastal humid tropical climate plantation condition. A total 103 trees were used in the study viz; 80 ten-year-old trees at reproductive maturity onset and 13 thirty-year-old trees with several cycles of reproduction that constitute two independent variables. Data collected were age of onset of flowering and size at reproductive maturity onset. Relative size at reproductive maturity onset (RSOM) was estimated as size at reproductive maturity onset (SOM) divided by asymptotic maximal size (AMS). Data analysis was conducted using pairwise t-test and principal component analysis (PCA). Reproductive maturity onset (flowering) was recorded in the ten-year-old stand eight (8) years after planting. Mean size at reproductive maturity onset (SOM) was height 5.32±1.7 m, dbh 0.11±0.03 m, total number of branches was 29.6±7.3, crown depth 5.24±1.05 m, crown diameter was 4.78±0.7 m, branch diameter 0.098±0.01 m, leaf length 0.13±0.02 m, leaf breadth 0.37±0.01 m, twig length 0.35±0.11 m and leaf per twig 6±0.84 and asymptotic maximal size (AMS) was height 19.85±0.76 m, dbh 0.95±0.09 m, total number of branches 62±5, crown depth 18.83±0.7 m, crown diameter 12.5±1.64 m, branch diameter 0.5±1.6 m, leaf length 0.16±0.023 m, leaf breadth 0.45±0.12 m, twig length 0.37±0.11 m and leaf per twig 19±7.5. Pairwise t-test analysis showed there was significant differences between SOM and AMS in all growth factors except leaf length, leaf breadth, and twig length. Highest relative size at reproductive maturity onset (RSOM) was recorded in leaf length 0.82, twig length 0.82, and leaf breadth 0.80, while, the lowest was branch diameter 0.11. Four components out of the total of eleven were extracted to explain the relationship in RSOM: Principal component one (PC1) explained 37.23%; PC2 26.4%, PC3 22.73%, and PC4 13.64%.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2022.06a
• /
• pp.78-80
• /
• 2022

Strawberry (Fragaria × ananassa) cultivation methods are rapidly changing from traditional soil cultivation to high bed hydroponics, which are easy to agricultural working. The objective was to evaluate the growth characteristics of three strawberry cultivars cultivated high bed system. The "Seolhyang", "Altaking", and "Keumsil" strawberry plants were transplanted in a glass-type greenhouse at Kyungpook National University Gunwi Agricultural Field. The cultivation period was approximately seven months from September 17, 2021 to April 21, 2022. Growth parameters measured including the number of leaves, plant height, petiole length, leaf length, leaf width, and crown diameter at two-week intervals. The environmental parameters for each location in the greenhouse were collected. Plant height in all cultivars continued to decrease from the early stage to the late stage of growth. The crown diameter was increased by 50 DAT, and then gradually decreased until late growth stage in all cultivars. Results indicated that the growth parameters represented to vary according to the cultivar of strawberry plants.

• Korean Journal of Dental Materials
• /
• v.45 no.4
• /
• pp.287-300
• /
• 2018

The aim of this study was to compare the morphological characteristics of two types of stainless steel permanent molar crowns using three-dimensional scanners and the morphological changes of these crowns after crimping. Two types of stainless steel permanent molar crowns, PO-96 and PERMACROWN were scanned using three-dimensional scanner. Crown size, crown index (ratio of buccolingual diameter to mesiodistal diameter at height of contour), cervical convergency of crown were measured. Stainless steel crowns were crimped and re-scanned with three-dimensional scanner. Morphological changes of stainless steel permanent molar crowns were analyzed. As for the crown index, maxillary PERMACROWN was larger buccolingually and smaller mesiodistally than maxillary PO-96 and mandibular PERMACROWN was smaller buccolingually and larger mesiodistally than mandibular PO-96. Maxillary PO-96 was more convergent to cervical mesiodistally than maxillary PERMACROWN and mandibular PO-96 was more convergent to the cervical mesiodistally, buccolingually than mandibular PERMACROWN. Both types of stainless steel permanent molar crowns showed reduction of cervical circumference after crimping. Two products were morphologically different in crown size, shape and cervical convergence. Although both types of stainless steel permanent molar crowns are pre-contoured type, additional crimping is needed to achieve better marginal adaptation.

• Journal of agriculture & life science
• /
• v.45 no.2
• /
• pp.51-59
• /
• 2011

This study was conducted to analysis the growth characteristics and the diameter at breast height (10 cm) reached ages in natural stand and platation for the optimal planting density and planting timing of Acer mono for. rubripes. There was high correlation between the DBH and crown diameter (E-W: r=0.82, S-N: r=0.76) in natural stand, and between the DBH and crown diameter (E-W: r=0.76, S-N: r=0.90) in plantation. In natural stand, average reached age on DBH 10 cm was $21.1{\pm}7.0$, and was $9.2{\pm}1.3$ in plantation. Therefore, the collectable timing of sap in artificial planting short approximately 2.3 times over the natural regeneration.

• Journal of Forest and Environmental Science
• /
• v.37 no.3
• /
• pp.193-205
• /
• 2021

The importance of forests and trees in climate change mitigation and soil nutrient cycling cannot be overemphasized. This study assessed the above-ground carbon stock of two exotic and two indigenous tree species - Gmelina arborea, Tectona grandis, Khaya grandifoliola and Nauclea diderrichii and their litter impact on soil nutrient content of an arboretum within the University of Port Harcourt, Nigeria. Data were collected from equal sample plots from the four species' compartments. Tree growth variables including total height, diameter at breast height, crown height, crown diameter and merchantable height were measured for the estimation of above-ground carbon stock. Soil samples were collected from a depth of 0-30 cm from each compartment and analyzed for particle size distribution, organic carbon, total nitrogen, available phosphorus, exchangeable bases, exchangeable acidity, cation exchange capacity, base saturation, pH, Manganese, Iron, Copper and Zinc. Analysis of Variance (ANOVA) was used to test for significant difference (p<0.05) in the carbon contents of the four species and the soil nutrient contents of the different species' compartments. Pearson correlation was used to assess the relationships between the carbon contents, growth parameters and soil parameters. The highest and lowest carbon stock per hectare was observed for G. arborea (151.52 t.ha^-1) and K. grandifoliola (45.45 t.ha^-1) respectively. Cation exchange capacity and base saturation were highest and lowest for soil under G. arborea and K. grandifoliola respectively. The pH was highest and lowest for soil under G. arborea and T. grandis respectively. Carbon stock correlated positively with dbh, crown diameter, merchantable height and Zn and negatively with base saturation. The study revealed that G. arborea and N. diderrichii can effectively be used for reforestation and afforestation programmes aimed at climate change mitigation across Nigeria. Therefore, policies to encourage and enhance their planting should be encouraged.

• Journal of Technologic Dentistry
• /
• v.30 no.2
• /
• pp.87-92
• /
• 2008

Purpose: In this study, we tried to compare marginal accuracy when produce ceramic crown using all ceramic materials and existent metal-ceramic system. Material and methods: All-ceramic systems were E-max (Ivoclar/Vivadent, Lichtenstein), Lava(3M, U.S.A.) and Wol-ceram(Teamziereis, Germany). Metal-ceramic system(PFG) was composed of Au-Pt alloy (Metalor, Switzerlandand) and overlying ceramic(D-sign, Ivoclar/Vivadent, Lichtenstein). We fabricated metal master die with upper diameter of 7.95mm, bottom diameter of 9.00mm, height of 5.00mm, and taper of $6^{\circ}$. All ceramic system used 0.5mm thickness ceramic coping, while metalceramic system used 0.3 thickness metal coping. By adding dentin and enamel ceramics on each coping, a crown with a proximal thickness of 1.0 mm and occlusal thickness of 2.0mm was fabricated. Pressure of 2kg was applied for 10 seconds on each crown with static load compressor. Before and after cementation, we measured the marginal gap at 4 points of each crown using optical microscope. The data was analyzed using a Student's t test and repeated-measures of analyses of variance(ANOVA) followed by a Bonferroni test. A p value<0.05 was considered significant. Results: As experiment results, marginal accuracy of wol-ceram and Lava is no good when compared with marginal accuracy of PFG. But marginal accuracy of E.max is good when compared with PFG. This result showed not significant. The marginal accuracy of E.max is good when compared with marginal accuracy of wol-ceram and Lava. Conclusion: The marginal accuracy of E.max is very good when compared with marginal accuracy of another group.

• Horticultural Science & Technology
• /
• v.32 no.1
• /
• pp.41-45
• /
• 2014

This study was conducted to investigate the effects of crown numbers on growth and yield of ever-bearing strawberry (Fragaria ${\times}$ ananassa Duch.) 'Goha' cultivar. Strawberry seedlings were planted with $55{\times}30cm$ distance on April 29, and the randomized block experimental was designed by putting the crown numbers by 1, 3, 5 and crown-unremoved as the control. At the early growth stage, as the numbers of crown decreased, the size of leaf became larger and inflorescence diameter became thicker. Plant height became higher as the number of crown increased at the final harvesting time. Fresh weight of crown-unremoved plants was 118 g, showing 77.2 g higher than that of plants with one crown. Numbers of the developed inflorescence of plants with five crowns and crown-unremoved was 20.1, whereas 6.8 of plants with one crown, resulted in 13.3 more crowns. However, crown number did not significantly affect the fruit quality. As the crown number increased, the average fruit weight was lighter and the marketable fruit rate was shown to decrease significantly. The marketable yield of crown-unremoved plants was $17,372kg{\cdot}ha^{-1}$, showing 68% higher than plants with one crown. Therefore, crown management without thinning crowns was recommended and inflorescence thickness less than 3 mm should be removed for successful production of ever-bearing strawberry 'Goha' cultivar during summer season.

• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.41-44
• /
• 2008

In this paper, major species of tree were discriminated in compartment by using LiDAR data and optic imagery. This is an important work in forest field. A current digital stock map has created the aerial photo and collecting survey data. Unlike high resolution imagery, LiDAR data is not influenced by topographic effects since it is an active sensory system. LiDAR system can measure three dimension information of individual tree. And the main methods of this study were to extract reliable the individual tree and analysis techniques to facilitate the used LiDAR data for calculating tree crown 2D parameter. We should estimate the forest inventory for calculating parameter. 2D parameter has need of area, perimeter, diameter, height, crown shape, etc. Eventually, major species of tree were determined the tree parameters, compared a digital stock map.

• Journal of Technologic Dentistry
• /
• v.42 no.3
• /
• pp.220-227
• /
• 2020

Purpose: This study aims to investigate the cusp variation pattern of the Korean mandibular second premolar and to determine the difference in tooth diameter and surface area using a virtual three-dimensional model. Methods: Dental casts from 69 students were scanned as a virtual dental models with a three-dimensional dental model scanner. Tooth diameter, absolute and relative individual areas, total crown area, the number of lingual cusps and central groove pattern were analyzed using RapidForm 2004. The Mann-Whitney U-test and the Kruskal-Wallis test were performed to verify sexual dimorphism, the difference in tooth diameter and surface according to the cusp variation pattern (α=0.05). Results: There was no significant difference except in buccolingual diameter (p<0.05) and buccolingual diameter at the cervix (p<0.05). The relative surface area of the total clinical crown was 65.76% for the buccal half and 34.24% for the lingual half, with a ratio of 2:1. In the case of the presence of two lingual cusps, the ratio was 21.47% for the mesiolingual half and 14.12% for the distaolingual half, with a ratio of 3:2. The dominant central groove patterns of the second premolar were the H-pattern (42.0%), followed by the Y-pattern (37.7%), then the U-pattern (20.3%). The relative buccal half was largest in the U-pattern central groove and the relative lingual half was largest in the Y-pattern central groove (p<0.05). Conclusion: This study is significant in that it measured quantitative surface areas and the findings could be a meaningful reference to comprehend dental anatomy in Koreans.