• Korean Journal of Food Science and Technology
• /
• v.37 no.3
• /
• pp.345-351
• /
• 2005

Physicochemical properties and functionalities of sodium caseinate, whey protein, skim milk, and whole milk with or without transglutaminase (TGase, 200 : 1) at $38^{\circ}C$ were determined. After crosslinking by TGase, whey protein was effective in improving heat stability compared to native protein at over $70^{\circ}C$. Whole milk was stable with lower turbidity compared to native solution. Whey protein showed low hydrolysis degree, fewer than sodium caseinate, during early activation time and increased slightly thereafter Emulsifying activities of sodium caseinate at pH 2 and 8, and whey protein at pH 7 and 8 improved. Emulsion stability of sodium caseinate improved at entire pH range studied. Foam expansion and foam stability of samples improved with TGase-treatment. Viscosities of TGase-treated samples were higher than those of untreated ones.

• Biomolecules & Therapeutics
• /
• v.13 no.3
• /
• pp.190-197
• /
• 2005

Advanced glycation end products (AGE) have been implicated in the pathogenesis of diabetic complications including nephropathy. However, the role of AGE in the activation of mesangial cells cultured under high glucose has not been elucidated. The effects of aminoguanidine, which prevents formation of AGE and protein cross-linking, on the synthesis of $TGF-{\beta}1$ and fibronectin by rat mesangial cells cultured under high glucose for 2 weeks were examined and compared with the effects of $N^G$-nitro-L-arginine methyl ester (NAME), a selective nitric oxide synthase inhibitor, because aminoguanidine also inhibits the inducible nitric oxide synthase. Culture of mesangial cells in 30 mM (high) glucose for 2 weeks induced 1.5-fold (ELISA) and 1.9-fold (Western blot analysis) increase in AGE in the culture media compared to 5.6 mM (control) glucose. Northern blot analysis revealed 1.5-fold increase in $TGF-{\beta}1$ and 1.7-fold increase in fibronectin mRNA expression in cells cultured under high glucose compared to control glucose. Increases in mRNA expression were followed by increased protein synthesis. Mink lung epithelial cell growth inhibition assay revealed 1.4-fold increase in $TGF-{\beta}1$ protein in high glucose media compared to control. Fibronectin protein also increased 2.1-fold that of control glucose by Western blot analysis. Administration of aminoguanidine suppressed AGE formation in a dose dependent manner and at the same time suppressed $TGF-{\beta}1$ and fibronectin synthesis by mesangial cells cultured in both control and high glucose. In contrast, NAME did not affect high glucose-induced changes. These findings support a role for AGE in high glucose-induced upregulation of $TGF-{\beta}1$ and fibronectin synthesis by mesangial cells.

• IMMUNE NETWORK
• /
• v.2 no.4
• /
• pp.195-201
• /
• 2002

Background: IgE is closely related to the development of allergies. However, the poor relationship between the specific IgE level and the severity of allergic diseases suggests the possibility of functionally different IgE isoforms. With this in mind, rat basophilic leukemia (RBL)-2H3 activation was analyzed with each type of rat IgE for two parameters, exocytosis and IL-4 mRNA production. RBL-2H3 has been well documented in the rat mucosal mast cell line. Methods: RBL-2H3 cells sensitized with each kind of rat IgE was activated by cross-linking FcRI with B5 (monoclonal anti-rat IgE mouse IgG antibodies). The RBL-2H3 exocytosis was measured by analyzing the ${\beta}$-hexosaminidase level, and the level of IL-4 mRNA synthesis was analyzed using semiquantitative RT-PCR. Rat IgE, which was produced by a parasite infection (REP), was prepared using either Paragonimus westermani metacercariae (REP-PW) or Anisakis simplex third stage larvae (REP-AS). A rat IgE prototype of IR162 was prepared by a peritoneal injection of immunocytoma. Results: The level of exocytosis showed a linear relationship with the rat IgE concentration when REP-PW or REP-AS was applied. However, it exhibited a biphasic response with IR162. In addition, the time course of heating at $56^{\circ}C$ illustrated the similarity between REP-PW and REP-AS, which differed from that of IR162. In contrast, the level of IL-4 mRNA synthesis in the RBL-2H3 cells with IR162 was comparable to that of either REP-PW or REP-AS. Conclusion: These results suggest that functionally different rat IgE isoforms exists in RBL-2H3 exocytosis.

• Composites Research
• /
• v.15 no.6
• /
• pp.8-15
• /
• 2002

In this work, the effect of biodegradable poly(butylene succinate)(PBS) in difunctional epoxy(21:P) resin was investigated in terms of rheological properties, cure kinetics, thermal stabilities, and mechanical interfacial properties. Rheological properties of the blend system were measured under isothermal condition using a rheometer. Cross-linking activation energies($\textrm{E}_c$) were determined from the Arrhenius equation based on gel time and curing temperature. The $\textrm{E}_c$ was increased in the presence of 10 wt% PBS as compared with neat 2EP. From the DSC results of the blends, the cure activation energies($\textrm{E}_a$) showed a similar behavior with $\textrm{E}_c$ due to the increased intermolecular interaction between 2EP and PBS. The decomposed activation energies($\textrm{E}_t$) for the thermal stability derived from the integral method of Horowitz-Metzger equation, were also increased in 10 wt% PBS. In addition, 20 wt% PBS showed the highest critical stress intensity factor($\textrm{E}_{IC}$). which was explained by increasing the fracture toughness of the 2EP/PBS blend systems.

• Journal of the Korean Society for Heat Treatment
• /
• v.19 no.4
• /
• pp.200-207
• /
• 2006

In addition to the basic properties of the base and top coating agents, corrosion resistance of non-chrome magni 565 coating and characteristics of coating film when coated to steel substrate were studied. The system had a good wettability at room temperature. Moreover, both the contact angle and surface tension were affected little by the viscosity of coating agent and surface roughness of the steel substrate. And the samples coated with optimal conditions showed a great corrosion resistance in salt spray test with 1500 hours or longer of initial appearance time of rust. The coating film was composed of overlapping layer of zinc and aluminium flakes, and the thickness of base coat increased with an increase of base coat viscosity. Based on the C-F peaks of 1,1-Difluoroethaen homo-polymer, it was thought that the base coat was an inorganic polymer bond layer. Meanwhile, the top coat showed C-F peaks of polytetrafluoroethylene with C-H peaks of phenol in FT-IR analysis. From the lower weight loss of base coat in TG analysis, it was thought that cross linking density of base coat was larger than that of top coat. It was thought that the small exothermic reactions observed in DSC curves were due to the thermosetting resins contained in the coating agents. Compared to the non-coated specimen, the coated sample showed more higher polarization resistance and corrosion potential with lower corrosion current density.

• Polymer(Korea)
• /
• v.25 no.1
• /
• pp.15-24
• /
• 2001

In this study, the effects of different glycol molar ratios of unsaturated polyester(UPE) resins on the curing behaviors were investigated. The cross linking process was checked or monitored by differential scanning calorimetry(DSC) and by viscoelastic properties of rigid-body pendulum model. The knife-edge from which the pendulum is suspended, is immersed in a reaction mixture, and the change of the viscoelastic behavior brings on those of the period(T) and logarithmic decrement(${\Delta}$) of the damped free oscillations of the pendulum. The values of T and ${\Delta}$ obtained are related to the dynamic modulus(E') and modulus loss(E'). The information on the viscoelastic behavior of unsaturated polyester(UPE) resins during the curing process are shown to illustrate the usefulness of the techniques. As the content of NPG in a propylene glycol(PG)/NPG glycol mixture increased, both the cycle time during cure and the change of damping during cure of UPE resin decreased.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.59 no.5
• /
• pp.1-15
• /
• 2017

In this study, we visualized the regional migration in Korea from 2001 to 2015 using the Chord diagram which can represents amount of migration and flows at the same time. In addition, we constructed a migration network and analyzed the degree centrality of each region for identifying the main regions linking to various regions. In 2001~2005, most of population moved into Geonggi from various regions. However, the capital function was transferred to Sejong in 2011~2015, and population moving into Sejong and Chungnam was increased significantly. The main outflow of population in migration network were shown at the regions in Jeonbuk and Gyeongbuk province in 2001~2004, and recently the regions in Gyeongnam, Gyeonggi, and Seoul were identified as the main nodes in terms of outflow of population. We also focused on migration in rural area through degree centrality, and cord diagram in Chungnam, Jeonbuk, and Jeonnam where include the representative crop area. In 2015. there was the significant increase of migration from Gyeonggi to Chungnam, and internal migration within Jeonbuk increased rather than cross-border migration. In addition, migration from Jeonam to capital area decreased in 2015 but migration among cities within Jeonman increased. In particular, Yesan-gun showed the significant migration to other cities in Jeonnam. Population is necessary to develop community and sustain economic growth in rural regions. Therefore, migration is important for the transfer of manpower. The strength of this study is to approach the temporal change of migration from the viewpoint on quantitative and structural characteristics.

• Polymer(Korea)
• /
• v.25 no.2
• /
• pp.177-185
• /
• 2001

In this work, the cure kinetics and rheological properties of difunctional epoxy(diglycidylether of bisphenol A, DGEBA)/polysulfone (PSF) blends were investigated using differential scanning calorimeter and rheometer. From the DSC results of the blends, the temperature of the exothermic peak and cure activation energy (E) using a half-width method were increased with increasing the PSF content to neat epoxy resin up to 30 wt%. However, a marginal decrease in the blend system was shown in E. The conversion ($\alpha$) and conversion rate (d$\alpha$/dt) were decreased as the content of PSF increases. Rheological properties of the blend system were investigated under isothermal condition using a rheometer. Cross-linking activation energy (E$_{c}$) was determined from the Arrhenius equation based on gel time and curing temperature. As a result, the E$_{c}$ showed a similar behavior with E which could be resulted from high viscosity of PSF and the phase separation between DGEBA and PSF.PSF.f PSF and the phase separation between DGEBA and PSF.PSF.

• Macromolecular Research
• /
• v.13 no.1
• /
• pp.45-53
• /
• 2005

In this study, a series of highly swelling hydrogels based on sodium alginate (NaAlg) and polymethacryl­amide (PMAM) was prepared through free radical polymerization. The graft copolymerization reaction was performed in a homogeneous medium and in the presence of ammonium persulfate (APS) as an initiator and N,N'-methylenebis­acrylamide (MBA) as a crosslinker. The crosslinked graft copolymer, alginate-graft-polymethacrylamide (Alg-g­PMAM), was then partially hydrolyzed by NaOH solution to yield a hydrogel, hydrolyzed alginate-graft-poly­methacrylamide (H-Alg-g-PMAM). During alkaline hydrolysis, the carboxamide groups of Alg-g-PMAM were converted into hydrophilic carboxylate anions. Either the Alg-g-PMAM or the H-Alg-g-PMAM was characterized by FTIR spectroscopy. The effects of the grafting variables (i.e., concentration of MBA, MAM, and APS) and the alkaline hydrolysis conditions (i.e., NaOH concentration, hydrolysis time, and temperature) were optimized systematically to achieve a hydrogel having the maximum swelling capacity. Measurements of the absorbency in various aqueous salt solutions indicated that the swelling capacity decreased upon increasing the ionic strength of the swelling medium. This behavior could be attributed to a charge screening effect for monovalent cations, as well as ionic cross-linking for multivalent cations. Because of the high swelling capacity in salt solutions, however, the hydrogels might be considered as anti-salt superabsorbents. The swelling behavior of the superabsorbing hydrogels was also measured in solutions having values of pH ranging from 1 to 13. Furthermore, the pH reversibility and on/off switching behavior, measured at pH 2.0 and 8.0, suggested that the synthesized hydrogels were excellent candidates for the controlled delivery of bioactive agents. Finally, we performed preliminary investigations of the swelling kinetics of the synthesized hydrogels at various particle sizes.

• Polymer(Korea)
• /
• v.24 no.3
• /
• pp.287-298
• /
• 2000

In preparing micron-sized monodisperse polystyrene beads by dispersion polymerization, the conversion, and the particle size and its distribution were affected by the reaction temperature, concentration of the monomer, solvent and initiator, molecular weight and concentration of the steric stabilizer, amount of oxygen existing in the reactor, and an appropriate combination of these starting materials. Ethanol as a dispersing agent, styrene as a monomer, PVP as a steric stabilizer, AIBN as an initiator, DVB as a cross-linking agent and toluene as a co-solvent were the basic materials for the synthesis. The reaction rate and the conversion were increased with the reaction temperature and the amount of DVB from 1 to 4%, and the conversion was saturated after 10 hours of the reaction time. The optimum reaction recipe for the preparation of the monodisperse PS beads was 25% styrene monomer, 0.5% DVB, 25% toluene, 10-15% PVP, and 2 and 4% AIBN, thereby, 3.9~4 ${\mu}{\textrm}{m}$ and 3.4~9.3 ${\mu}{\textrm}{m}$ of polystyrene beads, respectively, were successfully synthesized.