• 천문학논총
• /
• 제30권2호
• /
• pp.599-601
• /
• 2015

The short time scale X-ray variability associated with the accretion disk around compact objects is complex and is vaguely understood. The study of the cross correlation function gives an insight into the energy dependent behavior of the variations and hence connected processes. Using high resolution RXTE data, we investigate the dynamical cross correlation function of an observation of a black hole source XTE J1550-564 in the steep power law state. The cross correlation between soft and hard X- ray energy bands revealed both correlated and anti-correlated delays (${\leq}{\pm}15s$) on a correlation time scale of 50 s. It was noticed that the observed delays were similar to the delays between X-ray and optical/IR bands in other black hole and neutron star sources. We discuss the possible mechanisms/processes to explain the observed delays in the dynamical CCF.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2007년도 공동학술대회 논문집
• /
• pp.209-214
• /
• 2007

In Korean geology that crystalline rock is dominant, the properties of subsurface including the anisotropy are distributed complexly and changed abruptly. Because of such geological environments, cross-hole seismic traveltime tomography is widely used to obtain the high resolution image of the subsurface for the engineering purposes in the geotechnical sites. However, because the cross-hole tomography has a wide propagation angle coverage relatively, its data tend to include the seismic velocity anisotropy comparing with the surface seismic methods. It can cause the misinterpretation that the cross-hole seismic data including the anisotropic effects are analyzed and treated with the general processing techniques assuming the isotropy. Therefore, we need to consider the seismic anisotropy in cross-hole seismic traveltime tomography. The seismic anisotropic tomography algorithm, which is developed for evaluation of the velocity anisotropy, includes several inversion schemes in order to make the inversion process stable and robust. First of all, the set of the inversion parameters is limited to one slowness, two ratios of slowness and one direction of the anisotropy symmetric axis. The ranges of the inversion parameters are localized by the pseudo-beta transform to obtain the reasonable inversion results and the inversion constraints are controlled efficiently by ACB(Active Constraint Balancing) method. Especially, the inversion using the Fresnel volume is applied to the anisotropic tomography and it can make the anisotropic tomography more stable than ray tomography as it widens the propagation angle coverage.

• 한국지반공학회논문집
• /
• 제21권1호
• /
• pp.105-114
• /
• 2005

이 연구에서는 지반의 동적물성치 계측 기술로 시도된 인홀 시험법을, 경제성과 실용성 측면에서 개선하였다. 이전 연구에서 개발된 인홀 장비의 수동식 트리거(trigger) 시스템을 전기식 시스템으로 개량하였고, 발진기와 수신기 사이에 최적의 연결재를 개발하였다. 이로써, 암반뿐만 아니라 토사층에서도 이 기법을 사용하게 되었다. 이 장비를 여러 현장에서 크로스홀 시험과 인홀 시험을 통하여 그 성능을 검증하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.14-21
• /
• 2001

An experimental study has been conducted to investigate the heat/mass transfer characteristics within a square film cooling hole with asymmetric inlet flow conditions. The asymmetric inlet flow condition is achieved by making distances between side walls of secondary flow duct and film cooling hole different; one side wall is $2D_h$ apart from the center of film cooling hole, while the other side wall is $1.5D_h$ apart from the center of film cooling hole. The heat/mass transfer experiments for this study have been performed using a naphthalene sublimation method and the flow field has been analyzed by numerical calculation using a commercial code. Swirl flow is generated at the inlet region and the heat/mass transfer pattern with the asymmetric inlet flow condition is changed significantly from that with the symmetric condition. At the exit region, the effect of mainstream on the inside hole flow is reduced with asymmetric condition. The average heat/mass transfer coefficient is higher than that with the symmetric condition due to the swirl flow generated by the asymmetric inlet condition.

• 대한기계학회논문집B
• /
• 제26권7호
• /
• pp.937-944
• /
• 2002

An experimental study has been conducted to investigate the heat/mass transfer characteristics within a square film cooling hole with asymmetric inlet now condition. The asymmetric inlet now condition is achieved by making distances between side walls of the secondary now duct and the film cooling hole different; one side wall is $2D_h$ apart from the center of the film cooling hole, while the other side wall is $1.5D_h$ apart from the center of the film cooling hole. The heat/mass transfer experiments for this study have been performed using a naphthalene sublimation method and the now field has been analyzed by numerical calculation using a commercial code. Swirl now is generated at the inlet region and the heat/mass transfer pattem with the asymmetric inlet now condition is changed significantly from that with the symmetric condition. In the exit region, the effect of mainstream on the inside hole now is reduced with the asymmetric condition. The average heat/mass transfer coefficient is higher than that with the symmetric condition due to the swirl now generated by the asymmetric inlet condition.

• 한국지진공학회논문집
• /
• 제10권4호
• /
• pp.1-13
• /
• 2006

지반의 동적 변형 특성인 전단파 속도$(V_s)$, 압축파 속도$(V_p)$, 그리고 그에 따른 포아송 비(v)는 내진 설계나 내진 성능 평가 외에도 구조물의 거동 평가에 필요한 매우 중요한 지반 정수이다. 지난 수십 년 동안 이러한 지반 정수를 효율적이고 정밀하게 측정하기 위하여, 여러 가지 공내 탄성파 시험 기법들이 개발 및 적용되어 왔다. 본 연구에서는 가장 신뢰성이 높은 현장 탄성파 기법인 크로스홀 탄성파 시험을 지반 동적 물성 획득 기법으로 선정하였다. 지하수위 존재 여부에 관계 없이 토사뿐만 아니라 암반을 대상으로 크로스홀 시험을 성공적으로 수행할 수 있도록, 연직 시추공 안에서 지반을 대상으로 횡방향 가진이 가능한 스프링식 발진 장치를 개발하고, 두 곳의 기존 항만 부두 부지와 신규 LNG 저장 시설 두 부지로 구성된 국내 세 지역을 대상으로 크로스홀 탄성파 시험을 실시하였다. 대상 부지에서의 개발 발진 장치 적용을 통한 크로스홀 시험으로부터 지표 부근 토사부터 하부 공학적 기반암 및 지진학적 기반암으로 구성된 암반까지의 깊이별 $V_s,\;V_p$ 및 v와 같은 지반 동적 특성을 매우 효율적으로 결정하였으며, 적용 대상 시설물인 기존 항만 부두 시설물의 내진 성능 평가 그리고 신규 LNG 저장 시설물의 내진 설계를 위한 근본 자료로 제시하였다.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2005년도 제7회 특별심포지움 논문집
• /
• pp.155-175
• /
• 2005

지반의 동적 변형 특성인 전단파 속도(Vs), 압축파 속도(Vp), 그리고 그에 따른 포아송 비(v)는 내진 설계나 내진 성능 평가 외에도 구조물의 거동 평가에 필요한 매우 중요한 지반 정수이다. 지난 수 십 년 동안 이러한 지반 정수를 효율적이고 정밀하게 측정하기 위해 여러 가지 검측공 탄성파 시험 기법들이 개발 및 적용되어 왔다. 본 연구에서는 가장 신뢰성이 높은 현장 탄성파 기법인 크로스홀 탄성파 시험 기법을 지반 동적 물성을 획득하기 위한 기법으로 선정하였다. 지하수위 존재 여부에 관계없이 토사뿐만 아니라 암반을 대상으로 크로스홀 시험을 성공적으로 수행할 수 있도록 연직 시추공 안에서 지반에 대한 횡방향 가진이 가능한 스프링식 발진 장치를 개발하고, 두 곳의 기존 항만 부두 부지와 두 곳의 신규 LNG 저장 시설 부지로 구성된 국내 세 지역을 대상으로 크로스홀 탄성파 시험을 실시하였다. 대상 부지에서의 횡방향 가진의 크로스홀 시험으로부터 깊이별 Vs, Vp 및 v와 같은 지반 동적 특성을 효율적으로 결정하였으며, 적용 대상 시설물인 기존 항만 부두 시설물의 내진 성능 평가 그리고 신규 LNG 저장 시설물의 내진 설계를 위한 근본 자료로 제시하였다.

• 한국유체기계학회 논문집
• /
• 제9권3호
• /
• pp.36-43
• /
• 2006

Recently, micro hydropower and it's useful utilization are taking a growing interest as a countermeasure of global worming by carbon dioxide and exhaustion of fossil fuel. The purpose of this study is to investigate the possibility of extracting micro hydropower wasted by a valve in water supply system using micro cross-flow hydraulic turbine. In order to fulfill the functions of controlling flow rate and pressure in substitute for the valve, air and water are supplied into an air suction hole which is installed on the side wall of micro cross-flow hydraulic turbine. The results show that in case of supplying a lot of air into the air suction hole, about 50% of flow rate and relatively high value of loss coefficient are controlled by the turbine. Moreover, including high possibility of applying the micro cross-flow turbine to water supply system, extended application of the turbine to the water discharge system of drainage and irrigation canal.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.215-215
• /
• 2014

Red color light emitting diodes (LEDs) were fabricated using CdSe/CdZnS quantum dots (QDs). During the device fabrication process, oxygen plasma treatment on the ITO surface was performed to improve the interfacial contact between ITO anode and the hole injection layer. CdSe/CdZnS quantum dots were cross-linked to remove their surrounded organic surfactants. The device shows red emission at 622 nm, which is consistent with the dimension of the QDs (band gap=1.99 eV). The luminance shows 6026% improvement compared with that of LEDs fabricated without oxygen plasma treatment and quantum dots cross-linking process. This approach would be useful for the fabrication of high-performance QLEDs with ITO electrode and PEDOT:PSS hole injection layers.

• EDISON SW 활용 경진대회 논문집
• /
• 제6회(2017년)
• /
• pp.424-427
• /
• 2017

This study investigated the effect of strain on hole mobility and hole effective mass in a p-channel rectangular nanowire with two-dimensional confinement. We obtained the valence energy band structure using the six-band k.p method and calculated the mobility and effective mass of the hole in the [100] direction taking the strain effect into account in the inversion region. The hole mobility of strained silicon was calculated using Kubo-Greenwood formalism. As a result, it showed good performance compared to relaxed silicon, but its magnitude was insignificant.