• Korean Journal of Radiology
• /
• v.1 no.3
• /
• pp.127-134
• /
• 2000

Objective: To determine the extent to which thin-section and volumetric three-dimensional CT can depict airway reactivity to bronchostimulator, and to assess the effect of different airway sizes on the degree of reactivity. Materials and Methods: In eight dogs, thin-section CT scans were obtained before and after the administration of methacholine and ventolin. Cross-sectional areas of bronchi at multiple levels, as shown by axial CT, proximal airway volume as revealed by three-dimensional imaging, and peak airway pressure were measured. The significance of airway change induced by methacholine and ventolin, expressed by percentage changes in cross-sectional area, proximal airway volume, and peak airway pressure was statistically evaluated, as was correlation between the degree of airway reactivity and the area of airways. Results: Cross-sectional areas of the bronchi decreased significantly after the administration of methacholine, and scans obtained after a delay of 5 minutes showed that normalization was insufficient. Ventolin induced a significant increase in cross-sectional areas and an increase in proximal airway volume, while the effect of methacholine on the latter was the opposite. Peak airway pressure increased after the administration of methacholine, and after a 5-minute delay its level was near that of the control state. Ventolin, however, induced no significant decrease. The degree of airway reactivity did not correlate with airway size. Conclusion: Thin-section and volumetric spiral CT with three-dimensional reconstruction can demonstrate airway reactivity to bronchostimulator. The degree of reactivity did not correlate with airway size.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.1
• /
• pp.121-131
• /
• 2023

Although the utilization of drone photogrammetry that can generate spatial information using ultra-high-resolution images is increasing in the civil engineering and construction fields, analysis of areas that can be used is insufficient. Therefore, this study attempted to determine how far drone photogrammetry can be used in the civil engineering and construction fields by applying a detailed analysis method. The status map and cross-sectional map were actually vectorized using drone photogrammetry outcomes, compared and analyzed with the results acquired in the field, and the qualitative aspects of traffic safety facilities were analyzed to determine their usability. As a result, the accuracy of the plane position using drone photogrammetry was reliable, but the height accuracy was difficult to trust. Accordingly, although there is a possibility of preparing a status map, the use of it in areas requiring high accuracy such as cross-sectional plans was limited, and it is believed that it can be used in the construction management field where qualitative analysis is conducted.

• Proceedings of the Safety Management and Science Conference
• /
• 2009.04a
• /
• pp.305-308
• /
• 2009

According to the returns of Housing and business cycle over the period 1992 to 2007, it is a measure of the total volatility faced by investors in Housing properties. First, it isn't a distinct difference from business cycle contrary to U.S. Second, the rise of purchase price in total apartments moves up the consumer price index. According to the cross-sectional dispersion of returns and growth in net operating income (NOI) of apartments, industrial, retail and office properties using panel data for U.S. metropolitan areas over the period 1986 to 2002, it is a measure of the total volatility faced by investors in commercial real estate. To the extent that most of that volatility is difficult to diversify, cross-sectional dispersion may be an appropriate measure of risk.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.544-549
• /
• 2003

When a shock wave arrives at an open end of tube, an impulse wave is discharged from the tube exit and causes serious noise and vibration problems. In the current study, the effect of the cross-sectional area of tube on the impulse wave is numerically investigated using a CFD method. The Harten-Yee's total variation diminishing(TVD) scheme is used to solve the axisymmetric, two-dimensional, unsteady, compressible Euler equations. With three different cross-sectional areas of tube, the Mach number of the incident shock wave $M_{s}$ is varied between 1.01 and 1.5. The results obtained show that the directivity and magnitude of impulse wave strongly depend upon the Mach number of incident shock wave and are influenced by the tube area. It is also known that the tube cross-sectional area significantly affects the magnitude of impulse wave at or near the tube axis.

• The Journal of Korean Physical Therapy
• /
• v.22 no.5
• /
• pp.39-47
• /
• 2010

Purpose: The purpose of this study was to characterize changes in back muscles in patients with chronic back pain. Accordingly, we studied 154 patients with chronic low back pain with regard to area, aspect and triggering position of the pain. We also determined muscle atrophy in painful areas. Methods: Subjects were questioned about pain and a pain provoking test was done. On Magnetic Resonance Imaging (MRI), we measured cross sections of the multifidus, erector spinae, iliopsoas and quadratus lumborum muscles at each spinal level. Results: Muscles in painful regions (multifidus and erector spinae muscles) decreased in area significantly more than nonpainful regions, and showed a significant difference (p<0.05) at levels L3, L4, and L5. Painful regions of the iliopsoas and quadratus lumborum did not change significantly more than non-painful regionsexcept at L5 (p<0.05). The group that had unilateral low back pain showed a significant decrease in cross section compared to the group that had central or bilateral pain (p<0.05). Conclusion: Chronic low back pain causes variable decreases in cross-sectional areas of some but not all back muscles, and at some but not all spinal levels.

• The Journal of Korean Physical Therapy
• /
• v.22 no.3
• /
• pp.9-15
• /
• 2010

Purpose: To evaluate, in patients with degenerative disc disease (DDD), the efficacy of using spinal stabilizing exercises for the reversal? of atrophy of the multifidus and psoas major, reductions in pain and disability, and for increases in paraspinal muscle strength. Methods: Nineteen patients diagnosed with DDD participated for 10 weeks in a spinal stabilization exercise program. Pain and disability were measured before and after exercise using, respectively, a visual analogue scale (VAS) and the Oswestry Disability Index (ODI). Paraspinal muscular strength in four directions was evaluated using CENTAUR. Both before and after exercise we used computed tomography (CT) too measure cross-sectional areas (CSAs) of both the left and right multifidus and the psoas major at the upper & lower endplate of L4. Results: After 10 weeks of a spinal stabilization exercise program, pain was significantly decreased from $5.7{\pm}0.9$ to $2.5{\pm}0.9$ (p<0.01); the ODI score decreased from $16.7{\pm}4.9$ to $7.3{\pm}3.1$. Paraspinal muscle strength was significantly increased (p<0.01) and the CSAs of the left and right multifidus and psoas major muscles were significantly increased (p<0.01). Conclusion: Spinal stabilization exercise is effective in reversing atrophy in DDD patients, in reducing pain and disability, and in increasing paraspinal muscle strength. It is an effective treatment foro aiding rehabilitation in these cases.

• Journal of Korean Academy of Nursing
• /
• v.26 no.2
• /
• pp.271-280
• /
• 1996

The purpose of this study was to determine the effect of periodic walking during hindlimb suspension on the mass, relative weight, fiber type distribution and cross-sectional area of Type I and II fibers in the developing Type II plantaris muscle. To examine the effectiveness of periodic walking on mass and fiber size, the hindlimbs of young female Wistar rats were suspended (HS group) and half of these rats walked on a treadmill for 45 min／day(15 min every 4 hours) at 5 meters／min at a 15 degree grade(HS-W group) After seven days of hindlimb suspension, the plantaris muscle wet weight was 28.40％ significantly smaller（P＜0.005） and relative plantaris muscle weight was 26.97％ smaller compared with those of control rats（P＜0.05）. The plantaris muscle wet weight and the relative plantaris muscle weight increased by 46.60％ and 49.23％ respectively with periodic walking, moreover. the plantaris muscle wet weight and the relative plantaris muscle weight of the HS-W rats recovered to the level of the control rats. No change was observed in fiber type percentage of the developing plantaris muscle following one week of hindlimb suspension or periodic walking during hindlimb suspension. Type I and II fiber cross-sectional areas of the developing plantaris muscle were 42.51％ and 43. 68％ lower in the HS group than in the control group（p＜0.0001）, Type I and II fiber cross-sectional areas of the developing plantaris were 30.82％ and 45.97％ greater in the HS-W group than in the HS group（p＜0.0001）, whereas Type I and II fiber cross-sectional area of HS-W group were less than those of the control group（P＜0.0001） The results suggest that periodic walking can attenuate developing plantaris muscle atrophy induced by hindlimb suspension.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.17 no.1
• /
• pp.11-18
• /
• 1980

In the conventional ship's structures, the stiffeners with asymmetric sections have been widely used, in spite of the disadvantage on the point of strength, compared to those with symmetric sections. So far, the stiffened plating was usually analyzed not considering the geometric unsymmetry characteristics of the section, including only the cross sectional area and moment of inertia. In this paper, the stiffened plating is devided into the strips having a thin-walled open cross section by using the concept of the effective width. The geometric characteristics of the sections are also included. The governing equations are derived, which can be applied to the arbitrary cross section beams, and the symmetric and the asymmetric section beams which have the same cross sectional areas are analyzed by using the finite element method. From that result, we obtain the allowable load of the two sections, and compared them.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2003.10a
• /
• pp.123-129
• /
• 2003

Drift design using resizing techniques can be a very practical method in drift design of high-rise buildings since it cannot require sensitivity analysis and structural re-analysis. Resizing techniques has used the cross sectional areas as design variable and supposed that displacement participation factors are inversely proportional to structural weights. Efficiency of resizing techniques based on displacement participation factors may depend on proper selection of sectional properties as design variables. In this study, two different drift design methods with the different sectional properties as design variables are presented and applied to a 20-story structure.

• The Journal of Korean Physical Therapy
• /
• v.24 no.2
• /
• pp.66-72
• /
• 2012

Purpose: The purpose of this study is to explore the importance of the image distortion correction in the cross sectional area measurement for the iliopsas muscle, tensor fasciae latae muscle, gluteus maximus muscle and the knee extensor muscles, by using (magnetic resonance imaging) MRI. Methods: This study was performed using an open 0.32T MRI system. To estimate the image distortion, T1 images for an AAPM homogeneity/linearity phantom were acquired, and the region in which the maximum geometric distortion was less than or equal to the pixel size (1.6 mm) of the images, it was defined as the distortion correction-free region. The T2 images for a human subject's pelvis and thigh in normal positions were obtained. Then, after the regions of interest in the pelvis and thigh were moved into the distortion correction-free region, T2 images for the pelvis and thigh were scanned with the same imaging parameters used in the previous T2 imaging. The cross-sectional areas were measured in the two T2 images that were obtained in the normal position, and the distortion correction-free region, as well as the area error caused by geometric image distortion was calculated. Results: The geometrical distortion is gradually increased, from the magnet center to the outer region, in axial and coronal plane. The cross-sectional area error of gluteus maximus muscle and the knee extensors was as high as 9.27% and 3.16% in before and after distortion correction, respectively. Conclusion: The cross-sectional area of the muscles that suffered from the geometrical distortion is necessary to correct for the estimation of the intervention.