• Korean journal of food and cookery science
• /
• v.24 no.5
• /
• pp.652-664
• /
• 2008

In this study, a Hazard Analysis Critical Control Point (HACCP) plan was developed for the sanitary mass production of commercial Korean rice cake products (Gaepidduk, Injulmi, and Julpyon). The microbiological properties of manufacturing flow were evaluated in order to develop the HACCP Plan. The moisture contents of the rice cakes ranged between 36.2${\sim}$55.3%, whereas the water activity of all samples ranged between 0.954${\sim}$1.0. Microorganisms testing was conducted during various phases of the product flow of Korean rice cake preparation, and included assessments of food equipment, work environment, and cooking employees on a small scale. During the manufacture of Injulmi, Julpyon and Gaepidduk, CCPs were purchasing & storage, steaming and cooling, molding, and holding in the A and B manufactories. At the critical limit of CCPs, storage was conducted below at $5^{\circ}C$ in soybean powder, oil, and paste with redbeans. The steaming process was conducted above at $99^{\circ}C$ for 40 min. Cooling and holding processes were conducted for 2 hours below at $15^{\circ}C$. The molding process included sanitary education for foodhandlers and training for operators. Thus, certain prerequisite programs had to be implemented prior to the implementation of the HACCP system. High levels of bacterial contamination were detected in the aprons worn to work by some employees. Additionally, periodic sanitary education for foodhandlers and training for operators or managers was required. Cross contamination by materials was expected at the place where materials were processed or stored.

• Fire Science and Engineering
• /
• v.29 no.1
• /
• pp.73-79
• /
• 2015

There are three kinds of design method of the fire sprinkler systems. Grid type is connected all branch as a trapezoid. Loop type is connected cross-mains like circle. The last one is a tree type most commonly used. Grid type needs computer program to calculate the friction loss and flow rate apart from very simple form. In loop type, manual calculation is possible. Design engineer can draw up and calculate the demands without computer program. Because water supplies two direction in loop type, friction loss is smaller than tree type. Water distribution in operation area is uniform because of the small differences of sprinklers discharge pressure. Loop type is superior to tree type in respect of total pressure and flow rate. Using the small diameter pipe, the labor and construction cost will be decreased in the end. Loop type sprinkler design is rarely laid out because design engineers don't know the method. This paper is intended to inform that the loop type is better than the tree type in performance and economic point of view. And also this paper intend to use the loop type easily and widely.

• Journal of Biomedical Engineering Research
• /
• v.17 no.4
• /
• pp.449-458
• /
• 1996

Most of the conventional electrocardiowaphs foil to detect signals other than P-QRS-T due to the limited SNR and bandwidth. High-resolution electrocardiography(HRECG) provides better SNR and wider bandwidth for the detection of micro-potentials with higher frequency components such as vontricular late potentials(LP). We have developed a HRECG using uncorrected XYZ lead for the detection of LPs. The overall gain of the amplifier is 4000 and the bandwidth is 0.5-300Hz without using 60Hz notch filter. Three 16-bit A/D converters sample X, Y, and Z signals simultaneously with a sampling frequency of 2000Hz. Sampled data are transmitted to a PC via a DMA-controlled, optically-coupled serial communication channel. In order to further reduce the noise, we implemented a signal averaging algorithm that averaged many instances of aligned beats. The beat alignment was carried out through the use of a template matching technique that finds a location maximizing cross-correlation with a given beat tem- plate. Beat alignment error was reduced to $\pm$0.25ms. FIR high-pass filter with cut-off frequency of 40Hz was applied to remove the low frequency components of the averaged X, Y, and Z signals. QRS onset and end point were determined from the vector magnitude of the sigrlaIL and some parameters needed to detect the existence of LP were estimated. The entire system was designed for the easy application of the future research topics including the optimal lead system, filter design, new parameter extraction, etc. In the developed HRECG, without signal averaging, the noise level was less than 5$\mu$V$_rms RTI$. With signal averaging of at least 100 beats, the noise level was reduced to 0.5$\mu$V$_rms RTI$, which is low enough to detect LPs. The developed HRECG will provide a new advanced functionality to interpretive ECG analyzers.

• Journal of Navigation and Port Research
• /
• v.32 no.10
• /
• pp.771-776
• /
• 2008

The main purpose in having a control surface on a ship is to control the motion of it. It is the important element to determine the maneuvering characteristics of the ship. In this paper, the measured results has been compared with each other to predict the performance characteristics of flapped rudder's 2-dimensional section at $Re=3.0{\times}10^4$ using 2-frame grey level cross correlation PIV method. The side force of the rudder could be mainly improved by the lift force at 10 degrees angle of attack and the drag force at 20 degrees angle of attack. The separation point and boundary layer could be controlled by the change of the only flap's angle at 10 degrees angle of attack.

• Women's Health Nursing
• /
• v.12 no.3
• /
• pp.210-220
• /
• 2006

Purposes: This study examined the relationship between risk behaviors and sexual knowledge, sexual attitudes, and sexual experiences of male high school students. Method: A cross-sectional, descriptive study was conducted. Data were collected from 2 male high schools in metropolitan Gwangju. Five hundred forty-eight boys were enrolled in this study. Descriptive statistics, factor analysis, t-test or ANOVA, and Pearson's correlation were used for data analysis. Results: The mean sexual knowledge and sexual experience scores were relatively low, 0.60 out of 1 point, and 0.75 out of 4 points, respectively. Three attitude types of the students were identified: permissible, conservative and pleasure seeking attitude. The score of the permissible type was affected by the subjects' exposure to pornographic material. The score of the conservative type was affected by alcohol consumption and acquaintances with a heterosexual friend. The score of the pleasure seeking type was affected by their exposure to pornographic material, alcohol consumption, smoking, going to a video-room, and acquaintances with a heterosexual friend. There was a negative correlation between the permissible type and sexual knowledge, and a positive correlation between the conservative and pleasure seeking types and sexual experience. Conclusion: Male high school students who have been exposed to risk behaviors have a higher likelihood of indulging in sexual activity, and the pleasure seeking type appears to be related to sexual experience. An educational program may be needed to prevent risky behaviors and sexual experiences in male high school students considering their sexual attitude type.

• Women's Health Nursing
• /
• v.17 no.5
• /
• pp.463-473
• /
• 2011

Purpose: Cervical cancer can be prevented by regular cervical screening. Embarrassment has been reported as one important barrier to cervical screening uptake. The absence of appropriate instrumentation, however, has limited our understanding of the links between embarrassment and health care outcomes. The purpose of this study was to evaluate psychometric attributes of the uterine cervical cancer screening embarrassment questionnaire. Methods: A convenience sample for field study was recruited from four gynecological clinics in Gyeongju, Korea. Within a cross-sectional descriptive design, 339 women who had cervical screening completed self-administered measures of embarrassment including a visual analogue, general medical embarrassment, dispositional embarrassment, and Pap smear related negative emotion. Results: Rasch analysis of items demonstrated the evidence of one-dimensional construct and good 7-point rating scales functioning. Factor analysis revealed that uterine cervical cancer screening embarrassment was comprised of two domains-bodily manifestations and perceiving an undesirable social face. Construct validity was demonstrated by a high subscale-to-subscale correlation. Convergent and discriminant validity was evidenced by significant correlations with a 100 mm VAS scale, general medical embarrassment, and Pap smear related negative emotion. Known-group validity was established by comparing women with high versus low trait embarrassment. Both two sub-scales and overall scale demonstrated good internal reliability. Conclusion: The Uterine uterine cervical cancer screening questionnaire is a reliable and valid instrument suited to assessing the manifestations of embarrassment during screening. The use of instrument can be extended to understand the client's embarrassment undergoing health examinations which require the exposure of their private parts.

• Korean Journal of Dental Materials
• /
• v.44 no.1
• /
• pp.69-77
• /
• 2017

The aim of this study was to investigate the effects of chitosan powder addition on the strengthening of conventional glass ionomer cement. Two types of chitosan powders with different molecular weight were mixed with conventional glass ionomer cement (GIC): low-molecular weight chitosan (CL; 50~190 kDa), high-molecular weight chitosan (CH; 310~375 kDa). The chitosan powders (CL and CH) were separately added into the GIC liquid (0.25-0.5 wt%) under magnetic stirring, or mixed with the GIC powder by ball-milling for 24 h using zirconia balls. The mixing ratio of prepared cement was 2:1 for powder to liquid. Net setting time of cements was measured by ISO 9917-1. The specimens for the compressive strength (CS; $4{\times}6mm$), diametral tensile strength (DTS; $6{\times}4mm$), three-point flexure (FS; $2{\times}2{\times}25mm$) with flexure modulus (FM) were obtained from cements at 1, 7, and 14 days after storing in distilled water at $(37{\pm}1)^{\circ}C$. All mechanical strength tests were conducted with a cross-head speed of 1 mm/min. Data were statistically analyzed by one-way ANOVA and Tukey HSD post-hoc test. The mechanical properties of conventional glass ionomer cement was significantly enhanced by addition of 0.5 wt% CL to cement liquid (CS, DTS), or by addition of 10 wt% CH (FS) to cement powder. The CL particles incorporated into the set cement were firmly bonded to the GIC matrix (SEM). Within the limitation of this study, the results indicated that chitosan powders can be successfully added to enhance the mechanical properties of conventional GIC.

• Journal of the Korean Dietetic Association
• /
• v.25 no.4
• /
• pp.269-280
• /
• 2019

The purpose of this study was to investigate the relationship between HMR use and eating habits in young Korean adults. This cross-sectional study was conducted on 575 adults (232 men, 343 women) in their 20s and 30s in Korea. Their use of HMRs (classified as ready-to-eat, ready-to-cook, and fresh convenience foods) and eating habits were surveyed. The main reasons for HMR use by men and women were convenience (54.7%, 64.4%) and promptness (24.2%, 24.2%), respectively. The most frequent place for HMR purchase was a convenience store (74.1% and 65.0%, respectively). Regarding the frequency of HMR use, 1~2 times a week was the highest for ready-to-eat (40.9%) and ready-to-cook (30.1%), while no eating was the highest for fresh convenience foods (41.0%). HMR preference was the highest (3.8 out of 5 on a 5-point scale) for ready-to-eat, followed by ready-to-cook (3.3 points) and fresh convenience foods (3.3 points). The use frequency and preference of total HMRs, ready-to-eat foods, and ready-to-eat foods were positively correlated with unfavorable eating habits, including unbalanced eating, overeating, salty eating, spicy eating, skipping, and irregular meals. However, fresh convenience foods showed negative correlations with unbalanced eating, overeating, and salty eating. The use frequency and preference of total HMRs, ready-to-eat foods, and ready-to-cook foods were positively correlated with undesirable eating habits. However, fresh convenience food showed a negative correlation with eating habits such as unbalanced, overeating, and salty eating. These results should be considered for favorable food production and consumer guidance to promote healthy food choices.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.03a
• /
• pp.330-339
• /
• 2008

Ground-based interceptors(GBI) comprise a major element of the strategic defense against hostile targets like Intercontinental Ballistic Missiles(ICBM) and reentry vehicles(RV) dispersed from them. An optimum design of the subsystems is required to increase the performance and reliability of these GBI. Propulsion subsystem design and optimization is the motivation for this effort. This paper describes an effort in which an entire GBI missile system, including a multi-stage solid rocket booster, is considered simultaneously in a Genetic Algorithm(GA) performance optimization process. Single goal, constrained optimization is performed. For specified payload and miss distance, time of flight, the most important component in the optimization process is the booster, for its takeoff weight, time of flight, or a combination of the two. The GBI is assumed to be a multistage missile that uses target location data provided by two ground based RF radar sensors and two low earth orbit(LEO) IR sensors. 3Dimensional model is developed for a multistage target with a boost phase acceleration profile that depends on total mass, propellant mass and the specific impulse in the gravity field. The monostatic radar cross section (RCS) data of a three stage ICBM is used. For preliminary design, GBI is assumed to have a fixed initial position from the target launch point and zero launch delay. GBI carries the Kill Vehicle(KV) to an optimal position in space to allow it to complete the intercept. The objective is to design and optimize the propulsion system for the GBI that will fulfill mission requirements and objectives. The KV weight and volume requirements are specified in the problem definition before the optimization is computed. We have considered only continuous design variables, while considering discrete variables as input. Though the number of stages should also be one of the design variables, however, in this paper it is fixed as three. The elite solution from GA is passed on to(Sequential Quadratic Programming) SQP as near optimal guess. The SQP then performs local convergence to identify the minimum mass of the GBI. The performance of the three staged GBI is validated using a ballistic missile intercept scenario modeled in Matlab/SIMULINK.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.03a
• /
• pp.115-121
• /
• 2008

A core engine for pre-cooled turbojet engines is designed and its component performances are examined both by CFD analyses and experiments. The engine is designed for a flight demonstration of precooled turbojet engine cycle. The engine uses gas hydrogen as fuel. The external boundary including measurement devices is set within $23cm{\times}23cm$ of rectangular cross section, in order to install the engine downstream of the air intake. The rotation speed is 80000 rpm at design point. Mixed flow compressor is selected to attain high pressure ratio and small diameter by single stage. Reverse type main combustor is selected to reduce the engine diameter and the rotating shaft length. The temperature at main combustor is determined by the temperature limit of non-cooled turbine. High loading turbine is designed to attain high pressure ratio by single stage. The firing test of the core engine is conducted using components of small pre-cooled turbojet engine. Gas hydrogen is injected into the main burner and hot gas is generated to drive the turbine. Air flow rate of the compressor can be modulated by a variable geometry exhaust nozzle, which is connected downstream of the core engine. As a result, 75% rotation speed is attained without hazardous vibration and heat damage. Aerodynamic performances of both compressor and turbine are obtained and evaluated independently.