• Journal of Advanced Marine Engineering and Technology
• /
• 제32권5호
• /
• pp.698-706
• /
• 2008

Performance improvement of Small hydro turbine is a very important subject to solve in the stage of introduction and development of the turbine. Cross-flow hydro turbine should be also studied more in detail for the turbine performance in order to extend the sites of application. In order to improve the turbine performance, the effect of the turbine shape on the turbine performance should be examined. Therefore, the effect of runner blade number on the turbine performance is investigated by use of a commercial CFD code. The results show that runner blade number gives remarkable effect on the efficiency and output power of the turbine. Pressure on the surface of the runner blade changes considerably by the blade number at Stage 1, but relatively small change of velocity distribution occurs in the flow passage.

• Journal of Advanced Marine Engineering and Technology
• /
• 제37권2호
• /
• pp.163-169
• /
• 2013

In order to make the vertical-axis cross flow wind turbine commercially feasible, a guide vane is adopted and the effect of the guide vane shape is examined in order to improve the wind turbine performance. CFD analysis on the performance and internal flow of the turbine is carried out for the wind turbine model. The result shows that when the guide nozzle is installed, almost over two times of power coefficient are achieved in comparison with the case of no guide nozzle installation. The guide nozzle acts as a role of suppressing the flow resistance at the blade passage, which is found when the guide nozzle is installed. Moreover, in this study, two kinds of the guide vane with a straight type and a curved type are adopted and compared. The curved guide vane nozzle produces higher power coefficient in comparison with that of straight guide vane nozzle.

• Geomechanics and Engineering
• /
• 제14권5호
• /
• pp.407-419
• /
• 2018

In order to investigate flow characteristics after water inrush from the working face in process of karst tunnel construction, numerical calculation for two class case studies of water inrush is carried out by using the FLUENT software on the background of Qiyueshan tunnel. For each class water inrush from the tunnel face, five cases under different water-inrush velocity are simulated and researched. Three probing lines are selected respectively in the left tunnel, cross passage, right tunnel and in the height direction of the tunnel centerline. The variation characteristics of velocity and pressure on each probing line under the five water-inrush velocities are analyzed. As for the selected four groups probing lines in the tunnels, the change rules of velocity and pressure on each group probing lines under the same water-inrush velocity are discussed. Finally, the water flow characteristics after inrush from the tunnel face are summarized by comparing the case studies. The results indicate that: (1) The velocity and pressure change greatly at the intersection area of the cross passage and the tunnels. (2) The velocity nearby the tunnel side wall is the minimum, while it is the maximum in the middle position. (3) The pressure value of every cross section in the tunnels is basically fixed. (4) As water-inrush velocity increases, the flow velocity and pressure in the tunnels also increase. The former is approximately proportional to their respective water-inrush velocity, while the latter is not. The research results provide a theoretical basis for making scientific and rational escape routes.

• 대한기계학회논문집
• /
• 제17권6호
• /
• pp.1621-1632
• /
• 1993

본 연구에서는 모델 냉각통로 내에 대한 유동장 및 열전달 계수분포를 구하기 위하여 수치적 방법에 의한 접근을 시도하였고 이를 위하여 본 연구실에서 개발한 유한체적법 유동해석 프로그램인 TURBO-3D를 사용하였다. 계산 영역은 터빈날개 내의 냉각유로를 단순화한 ㄹ자 형태의 유로를 설정하였으며 등온상태의 유동에 대하여 해를 구하였다.실제 고온의 터빈날개내에서는 큰 온도구배에 의한 강한 부력효과가 예상되어 이를 무시할 수는 없으나 등온 가정하의 유동장으로부터 Reynolds analogy 에 의한 열전달특성의 유추가 가능하다. 그러므로, 본 연구에서는 특히 회전수의 변화에 따른 Coriolis효과의 변화 및 2차 유동의 구조를 파악하였고 또한 이들에 의한 주 유동장과 압력분포 및 국부 열전달 특성을 파악하였다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2007년도 하계학술발표대회 논문집
• /
• pp.97-97
• /
• 2007

• Structural Engineering and Mechanics
• /
• 제52권1호
• /
• pp.173-203
• /
• 2014

The cross-section warping due to the passage of high-speed trains can be a relevant issue to consider in the dynamic analysis of bridges due to (i) the usual layout of railway systems, resulting in eccentric moving loads; and (ii) the use of cross-sections prone to warping deformations. A thin-walled beam formulation for the dynamic analysis of bridges including the cross section warping is presented in this paper. Towards a numerical implementation of the beam formulation, a finite element with seven degrees of freedom is proposed. In order to easily consider the compatibility between elements, and since the coupling between flexural and torsional effects occurs in non-symmetric cross-sections due to dynamic effects, a single axis is considered for the element. The coupled flexural-torsional free vibration of thin-walled beams is analysed through the presented beam model, comparing the results with analytical solutions presented in the literature. The dynamic analysis due to an eccentric moving load, which results in a coupled flexural-torsional vibration, is considered in the literature by analytical solutions, being therefore of a limited applicability in practice engineering. In this paper, the dynamic response due to an eccentric moving load is obtained from the proposed finite element beam model that includes warping by a modal analysis.

• 한국컴퓨터정보학회논문지
• /
• 제24권6호
• /
• pp.175-182
• /
• 2019

This study aims to identify causal variables by examining the mutual influences of community consciousness and life satisfaction. We used some data of KCYPS. A longitudinal study of 1952 adolescents selected as a sample was conducted using the Aautoregressive crossover delay model. The results of this study are as follows: First, it showed that life satisfaction is consistently affecting the later life satisfaction with the passage of time. Second, community consciousness showed that the previous community consciousness has a constant influence on the subsequent community consciousness as time passes. Third, the effect of previous life satisfaction on community consciousness was significant. Therefore, the cross-delay effect of life satisfaction on community awareness was stable with time. In other words, life satisfaction level was a causal variable that takes precedence over community consciousness, and the higher the life satisfaction of the previous time, the higher the level of community consciousness in the future. Fourth, the cross-delay effect of community consciousness on life satisfaction was not significant because community consciousness at previous time had no meaningful effect on life satisfaction at later time, so consciousness of community at previous time affects life satisfaction. This study provided some implications basing on this results.

• 한국터널지하공간학회 논문집
• /
• 제17권3호
• /
• pp.249-256
• /
• 2015

현재 목포-제주간 해저터널은 타당성 검토를 위한 기본계획 중에 있으며, 노선의 길이가 108 km인 고속여객 전용선으로 단면형태는 유로터널과 같은 서비스터널을 설치한 단선쌍굴터널로 검토되고 있다. 또한 교통량은 10량 1편성의 열차가 일일 76편/편도 운행하는 것으로 계획하고 있다. 이에 본 연구에서는 터널의 피난연결통로의 적정 간격을 정량적 위험도 평가기법에 의해서 검토하는 것을 목표로 정량적 위험도 평가기법을 정립하였다. 또한 터널의 단면형태를 복선터널(Type 3), 쌍굴터널(Type 1) 및 복선터널을 격벽으로 분리하는 형태의 터널(Type 2)을 대상으로 단면형태별로 적정 피난연결통로 간격을 산정하였다. 본 연구결과, Type 2의 단면이 대피안전확보에 가장 효과적이며, 현행 국내 사회적 위험도 평가기준을 만족하기 위해서는 단면형태별로 350 m (Type 1), 400 m (Type 2), 1,500 m (Type 3)의 피난연결통로 간격이 요구되는 것으로 나타나고 있다.

• 설비공학논문집
• /
• 제16권4호
• /
• pp.368-373
• /
• 2004

A flow field in a passage with periodically converging-diverging cross-section is investigated experimentally by PIV measurement. A tube with a sinusoidally wavy cross section is one of several devices employed for enhancing the heat and mass transfer efficiency due to turbulence promotion and unsteady vortical motion. While the numerical flow visualization results have been limited to the fully developed cases, existing experimental results of this flow were simple qualitative ones by smoke or dye streak test. Therefore, the main purpose of this study is to produce quantitative flow data for fully developed and transient flow regime by the Correlation Based Correction PIV (CBC PIV) and to conjecture the analogy between flow characteristics and heat transfer enhancement with low pumping power. Another purpose of this paper is to examine the onset position of the transition and the global mixing, which results in transfer enhancement. At Re=2000, evidences of the global mixing are captured at 2.5 wavy module through the variation of RMS values and instantaneous velocity plot.

• 한국유체기계학회 논문집
• /
• 제16권4호
• /
• pp.28-34
• /
• 2013

Centrifugal pump consists of a axis, a impeller and a spiral casing. The impeller is the most important component in centrifugal pump. But to minimize flow loss in discharge passage including spiral casing, the shape of spiral casing is very important also. So, to investigate the effect of shape of the spiral casing on performance curve of pump, the characteristics of spiral casing were studied through numerical analysis for centrifugal pump used on industry field. From the results the rectangular model was showed more loss than the others because of asymmetric flow field.