• Fibers and Polymers
• /
• v.4 no.4
• /
• pp.182-187
• /
• 2003

Low molecular weight copolymers of maleic anhydride and vinyl acetate were prepared to develop formaldehyde free cross-linking agents. Since lower molecular weight is favorable for efficient penetration of the finishing agent into the cotton fibers in the padding process, the concentration of the initiator, chain transfer agent and the monomer ratios were varied to obtain copolymers of low molecular weights. The prepared polymers were characterized by GPC, $^1{H-NMR}$, FTIR, DSC and TGA. Copolymers of molecular weights of 2 000 to 10 000 were obtained and it was found that the most efficient method of controlling the molecular weight was by varying the monomer ratios. Poly(maleic anhydride-co-vinyl acetate) did not dissolve in water, but the maleic anhydride residue hydrolyzed within a few minutes to form poly(maleic acid-co-vinyl acetate) and dissolved in water. However, the maleic acid units undergo dehydration to form anhydride groups on heating above ${160}^{\circ}C$ to some extent even in the absence of catalysts. The possibility of using the copolymers as durable press finishing agent for cotton fabric was investigated. Lower molecular weight poly(maleic anhydride-co-vinyl acetate) copolymers were more efficient in introducing crease resistance, which appears to be due to the more efficient penetration of the cross-linking agent into cotton fabrics. The wrinkle recovery angles of cotton fabrics treated with poly(maleic anhydride-co-vinyl acetate) copolymers were slightly lower than those treated with DMDHEU and were higher when higher curing temperatures or higher concentrations of copolymer were used, and when catalyst, $NaH_2$$PO_2$, was added. The strength retention of the poly(maleic anhydride-co-vinyl acetate) treated cotton fabrics was excellent.

• Archives of Plastic Surgery
• /
• v.40 no.1
• /
• pp.11-18
• /
• 2013

Background To minimize the inflammatory reaction and improve healing, a new modified dermal substitute composed of an atelocollagen, chondroitin-6-sulfate, and amniotic membrane (AM) was applied to full-thickness skin defects in a pig. Atelocollagen was extracted from bovine skin, and two modified dermal substitutes were generated according to the cross-linking type. Methods The AM-collagen dermal substitutes were characterized and compared with currently used dermal substitutes in a pig skin defect model. There were five experimental groups: dehydrothermal (DHT) cross-linking atelocollagen with the AM on the top (AM-DHT), DHT and chemical cross-linking atelocollagen with the AM on the top (AM-DHT/chemical), Terudermis, Integra, and AlloDerm. After $3{\times}3cm$ full-thickness skin defects on the back of a pig were created, each dermal substitutes dermal substitutes was randomly grafted on the defects. Two weeks after grafting, autologous partial-thickness skin was over-grafted on the neodermis. The take rate of the dermal substitutes, skin, and histological sections were all assessed at 1, 2, and 4 weeks postoperatively. Results More rapid healing and a higher take rate were evident in the AM-DHT and Terudermis groups. Histological examination revealed fewer inflammatory cells and more fibroblast hyperplasia in these two groups. Four weeks after surgery, the amount of newly formed collagen was significantly more appropriate in the AM-DHT group. Conclusions These observations provide supporting evidence that a newly developed amniotic-collagen dermal substitute may inhibit inflammatory reactions and promote wound healing.

• Archives of Plastic Surgery
• /
• v.35 no.1
• /
• pp.7-12
• /
• 2008

Purpose: Since the report of artificial dermis manufacturing method using collagen by Yannas in 1980, collagen has been effectively used as dermal substitute with its merits such as, lower antigeneicity, controllable biodegradation rate, and minimal inflammatory cytotoxic properties in the dermal tissue engineering field. However, weak mechanical durability was the main drawback of collagen dermal substitute. To improve its stability, mechanical or chemical cross-linking was used. Despite of such process, its clinical use was restricted due to weak durability. To improve the durability of collagen matrix, we designed elastin-incorporated collagen matrix and compared its durability with conventional collagen matrix. Methods: 15mm diameter with 4mm thick collagen dermal matrix was made according to Yannas protocol by mixing 0.5% bovine collagen and chondroitin-6-sulfate followed by degassing, freeze drying, dehydrodermal cross-linking and chemical cross-linking procedure. In elastin incorporated collagen matrix, same procedure was performed by mixing elastin to previous collagen matrix in 4:1 ratio(collagen 80% elastin 20%). In comparison of the two dermal matrix in vitro tests, matrix contracture rate, strain, tensile strength, was measured and stiffness was calculated from comparative analysis. Results: In terms of matrix contracture, the elastin-incorperated added collagen dermis matrix showed 1.2 times more contraction compared to conventional collagen matrix. However, tensile strength showed 1.6 times and stiffness showed 1.6 times increase in elastin-incorporated matrix. Conclusion: Elastin incorperated collagen matrix manufactured by our team showed increased durability due to improvement in tensile strength and stiffness compared to previous collagen matrix($Integra^{(R)}$).

• The Korean Journal of Physiology and Pharmacology
• /
• v.5 no.6
• /
• pp.495-501
• /
• 2001

We have cloned the mouse neurotensin/neuromedin N (NT/N) gene from the murine mast cell line Cl.MC/C57.1 for the first time. The murine NT/N cDNA clone consisted of 765 nucleotides and coded for 169 peptide residues with an N-terminal signal peptide, and the C-terminal region contained of one copy of neurotensin (NT) and one copy of neuromedin N (NN). Total of four Lys-Arg dibasic motifs were present; one each at the middle of the open reading frame, at the N-terminal of NN, at the C-terminal of NT, and between NN and NT. Amino acid sequence analysis of the mouse NT/N revealed 90% homology to that of the rat NT/N gene. NT/N is expressed in murine mast cell lines (Cl.MC/C57.1 and P815), but not in murine bone marrow-derived mast cells (BMMCs), murine macrophage cell line (RAW 264.7), nor in murine T cell line (EL-4). NT/N mRNA in C1.MC/C57.1 is highly inducible by IgE cross-linking, phorbol myristate acetate, neurotensin, and substance P. Following the treatment of demethylating agent, 5-azacytidine (5-azaC), the NT/N gene was induced in BMMCs in response to IgE cross-linking. 5-azaC-treated BMMCs did not express the NT/N gene without additional stimuli. These findings suggested that the regulation of NT/N gene expression was dependent on the effects of not only gene methylation but also enhancer and/or repressor proteins acting on the NT/N promoter.

• Journal of Microbiology and Biotechnology
• /
• v.31 no.4
• /
• pp.610-620
• /
• 2021

There has been increasing interest in the head and neck squamous cell carcinoma (HNSCC) that is caused by high-risk human papillomavirus (HR-HPV) and has posed a significant challenge to Otolaryngologists. A rapid, sensitive, and reliable method is required for the detection of HR-HPV in clinical specimens to prevent and treat HPV-induced diseases. In this study, a multiple cross-linking spiral amplification (MCLSA) assay was developed for the visual detection of HPV-16. In the MCLSA assay, samples were incubated under optimized conditions at 62℃ for 45 min, and after mixing with the SYBR Green I (SGI) dye, the positive amplicons showed bright green fluorescence while the negative amplicons exhibited no obvious change. The specificity test revealed that the developed MCLSA technique had high specificity and could effectively distinguish all five HPV-16 strains from other pathogenic microorganisms. In terms of analytical sensitivity, the limit of detection (LoD) of MCLSA assay was approximately 5.4 × 101 copies/tube, which was 10-fold more sensitive than loop-mediated isothermal amplification (LAMP) and RT-PCR. The detection results of laryngeal cancer specimens collected from 46 patients with suspected HPV infection in the Liaoning region demonstrated that the positive detection rates of MCLSA and hybridized capture 2 kit were 32.61% (15/46). The true positive rate of the MCLSA assay was higher than that of RT-PCR (100% vs. 93.33%) and LAMP (100% vs. 86.67%). Therefore, the MCLSA assay developed in the present study could be a potentially useful tool for the point-of-care (PoC) diagnosis of HR-HPV, especially in resource-limited countries.

• The Korean Journal of Applied Statistics
• /
• v.29 no.7
• /
• pp.1445-1458
• /
• 2016

This paper derives a correlation coefficient using detrended cross-correlation analysis (DCCA) method for 59 regional temperature series for 40 years from 1976 to 2015. The average temperature, maximum temperature, and minimum temperature series for 4 year units are analyzed; consequently, we estimated that a temperature correlation exists between the two regions during the unit period where the correlation coefficient is greater than or equal to 0.9; subsequently, we construct a network linking the two regions. Based on network theory, average path length, clustering coefficient, assortativity, and modularity were derived. As a result, it was found that the temperature network satisfies a small-worldness property and is a network having assortativity and modularity.

• Journal of Pharmaceutical Investigation
• /
• v.36 no.2
• /
• pp.83-87
• /
• 2006

Poly(acrylic acid) (PAA) was identified to possess good mucoadhesive properties ensuring its application to extend the retention times of the formulations at the oral cavity, intended route of administration using the polymer. In the noncross-linked state, PAA will swell and become eroded owing to the presence of salivary flow from the site of application. The formation of cross-links between the polymer chains will allow swelling but prevents the erosion of the dosage form. In the current study, cross-linking was achieved by esterification of the PAA chains with sucrose. The density of crosslinking was modified by changing sucrose concentration and the duration of cure time. The cross-linking density of the polymer hydrogel was assessed by equilibrium swelling studies. The mucoadhesion testing method allowed a comparative study of the hydrogels prepared. An inverse relationship between equilibrium swelling and peak detachment force showed that increased PAA chain density per unit area enhanced the mucoadhesive interaction.

• Elastomers and Composites
• /
• v.22 no.1
• /
• pp.20-28
• /
• 1987

The characteristic of the dielectric relaxation in silicone rubbers were studied in the frequency range of $1{\times}10^2{\sim}3{\times}10^6Hz$ at the temperature range of $30^{\circ}{\sim}170^{\circ}C$. As the results of the study, it has been confirmed that the silicone rubber containing the cross-linking agants of 2,5-bis(tert-butylperoxy)-2, 5-dimethyl hexane exhibit the dissipation spectra of two kind(${\alpha},\;{\beta}$ dissipation) due to the siloxane and methyl groups. Particularly, the maximum value of dielectric loss spectra of silicone rubber combinning the cross-linking agents of 0.7phr to 1.0phr are on the increasing in high frequency region, but the specimen of above 1.0phr become smaller again. The energy and the entropy of activation on the molicular motion obtained 18.32 kcal/mole and $1.48ca1/mole{\cdot}deg$ in measuring condition respectively.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.5
• /
• pp.1333-1338
• /
• 2013

Chitosan-based nanoparticles (CSNP) were prepared through ionic cross-linking and gelation of chitosan (CS) by tripolyphosphate (TPP). CS properties such as molecular weight, and preparation conditions were screened and the resulting nanoparticles were examined by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The obtained particles were consistently spherical with an overall diameter of approximately $107{\pm}20$ nm. They were successfully used as a carrier for Zidovudine, an anti-human immunodeficiency virus (HIV) which, to our knowledge, is novel. The encapsulation ability, loading capacity, and controlled release behavior for these CSNP was evaluated. Results indicated that their intrinsic properties were strongly affected by properties inherent to CS such as molecular weight, and by the preparation condition, such as cross-linking density, which depends on the concentration of the cross-linker. In vitro release tests for the entrapped zidovudine showed that the CNNP provided a continuous release that can last upwards 20 h.

• Korean Journal of Materials Research
• /
• v.32 no.4
• /
• pp.186-192
• /
• 2022

Collagen is one of the most widely used biological materials in medical design. Collagen extracted from marine organisms can be a good biomaterial for tissue engineering applications due to its suitable properties. In this study, collagen is extracted from fish skin of Ctenopharyngodon Idella; then, the freeze drying method is used to design a porous scaffold. The scaffolds are modified with the chemical crosslinker N-(3-Dimethylaminopropyl)-N'-ethyl carbodiimide hydrochloride (EDC) to improve some of the overall properties. The extracted collagen samples are evaluated by various analyzes including cytotoxicity test, SDS-PAGE, FTIR, DSC, SEM, biodegradability and cell culture. The results of the SDS-PAGE study demonstrate well the protein patterns of the extracted collagen. The results show that cross-linking of collagen scaffold increases denaturation temperature and degradation time. The results of cytotoxicity show that the modified scaffolds have no toxicity. The cell adhesion study also shows that epithelial cells adhere well to the scaffold. Therefore, this method of chemical modification of collagen scaffold can improve the physical and biological properties. Overall, the modified collagen scaffold can be a promising candidate for tissue engineering applications.