• 한국지반공학회논문집
• /
• 제16권1호
• /
• pp.43-50
• /
• 2000

본 논문은 실내시험과 수치모델을 이용하여 십자형 배수재의 압밀촉진효과와 등가직경을 검토하고 판형배수재와 비교하였다. 배수재의 등가직경은 실내시험으로부터 역계산하여 문헌에 의해 제시된 공식으로부터 산정된 결과와 비교하였고, 압밀효과는 3차원 흐름해석프로그램인 MODFLOW를 사용하였다. 해석모델의 신뢰성은 현장의 침하-시간 계측자료를 이용하여 검토하였다. 실내시험결과 산정된 판형 배수재의 등가직경은 Rixner의 제안식에 유사한 경향을 보였고, 십자형 배수재의 등가직경은 $d_w\;=\; \\tarc{3}{4}.(b+t)$로 산정되었다. 실제현장을 모델링한 수치해석결과 십자형 배수재는 압밀시간이 9-10% 감소하였고, 현장자료를 이용한 수치 흐름모델로부터 산정한 등가직경은 실내시험보다 3.5배 작은 것으로 나타났다.

• Design & Manufacturing
• /
• 제15권2호
• /
• pp.56-62
• /
• 2021

In this study, design technology of a non-mechanical flow meter using fluidic oscillation generated during the fluid flow in the chamber was investigated. To with respect to design a splitter, which is the most important factor in fluid oscillation, a transient flow simulation analysis was performed for three types of shapes and changes in inlet flow velocity. The oscillation characteristics with respect to the time in each case were compared, and it was confirmed that the SM03 model was the best among the presented models. In addition, the FFT analysis of the fluid oscillation results for the SM03 model was used to obtain a linear correlation between the flow velocity change and the maximum frequency, and a frequency of 20.957 (Hz/m/s) per unit flow velocity was obtained. Finally, injection molding simulation and molding experiment of the chamber with the designed splitter were performed.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.411-416
• /
• 1999

The measurement of unsteady flow rate is of vital importance to clarify and improve the dynamic characteristics in pipeline, hydraulic components and system. There is also demand for a real time flow sensor of ability to measure unsteady flow rate with high accuracy and fast response to realize feedback control of flow rate in fluid power systems. In this paper, we propose an approach for estimating unsteady flow rate through a pipeline and components under high pressure condition. In the method, unsteady flow rate is estimated by using hydraulic pipeline dynamics and the measured pressure values at two distant points along the pipeline. The distributed parameter model of hydraulic pipeline is applied with consideration of frequency dependent viscosity friction and unsteady velocity distribution at a cross section of a pipeline. By using the self-checking functions of the method, the validity is investigated by comparison with the measured and estimated pressure waveforms at the halfway section on the pipeline. The results show good agreement between the estimated flow rate waveforms and theroetical those under unsteady laminar flow conditions. the method proposed here is useful in estimating unsteady flow rate through an arbitray cross section in hydraulic pipeline and components without installing an instantaneous flowmeter.

• 한국수자원학회논문집
• /
• 제44권2호
• /
• pp.157-167
• /
• 2011

본 연구에서는 복단면개수로및 불규칙한 하상을보이는 횡단면 상에서의 수위-유량곡선 및단위유량횡분포예측을 위한 유한요소모형을 개발하였다. 지배방정식은 정상류와 종방향 등류를 가정한 운동량방정식을 이용하며, 수면은 횡단면에 걸쳐 일정하다고 가정한다. 홍수터 식생의 영향을 반영하기 위해 식생항력이 지배방정식에 포함되었으며, 수치해를 구하기 위해 유한요소법을 적용하였다. 단면형상과 Manning의 조도계수, 식생정보, 종방향 하상경사를 입력자료로 수위-유량 곡선을 예측 가능하며, 주어진 수위에서의 흐름방향 단위유량의 횡방향 분포를 예측할 수 있다. 개발된 모형의 검증을 위해 실측자료 및 Darby and Thorne (1996)의 모형 결과, 그리고 비선형 k-$\epsilon$ 모형의 결과와도 비교하였다. 검증된 모형의 알고리즘을 2차원 모형의 상류단 경계조건 설정에 활용하여, 유입유량을 절점별 단위유량으로 분배시켰을 때와 그렇지 않았을 때의 결과를 비교하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.545-548
• /
• 2002

Turbines have been known to be particularly susceptible to flow-induced self-excited vibration. In such vibrations, direct damping and cross stiffness effects of aerodynamic forces determine rotordynamic stability. In axial turbines with eccentric shrouded rotors, the non-uniform sealing gap causes azimuthal non-uniformities in the seal gland pressure and the turbine torque which destabilize the rotor system. Previously, research efforts focused solely on either the seal flow or the unshrouded turbine passge flow. Recently, a model for flow in a turbine with a statically offset shrouded rotor has been developed and some stiffness predictions have been obtained. The model couples the seal flow to the passage flow and uses a small perturbation approach to determine nonaxiymmetric flow conditions. The model uses basic conservation laws. Input parameters include aerodynamic parameters (e.g. flow coefficient, reaction, and work coefficient); geometric parameters (e.g. sealing gap, depth of seal gland, seal pitch, annulus height); and a prescribed rotor offset. Thus, aerodynamic stiffness predictions have been obtained. However, aerodynamic damping (i.e. unsteady aerodynamic) effects caused by a whirling turbine has not yet been examined. Therefore, this paper presents a new unsteady model to predict the unsteady flow field due to a whirling shrouded rotor in turbines. From unsteady perturbations in velocity and pressure at various whirling frequencies, not only stiffness but also damping effects of aerodynamic forces can be obtained. Furthermore, relative contributions of seal gland pressure asymmetry and turbine torque asymmetry are presented.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.765-768
• /
• 2003

The objective of the present study was to visualize the pulsatile flow field in a branching model by using the high-resolution PIV system. A bifurcated flow system was built for the experiments in the pulsatile flow. Harvard pulsatile pump was used to generate the pulsatile velocity waveforms. Conifer powder as the tracing particles was added to water to visualize the flow fields. Two consecutive particle images at several cross sections of the flow filed were captured by the CCD cameras ($1K{\ast}1K$ and $640{\ast}480$). The results after the image processing clearly showed the recirculation zones and the formation of the paired secondary flows from the distal to the apex in the bifurcated model. The results also indicated that the flow velocities in the inner wall moved faster than those in the outer wall due to the inertial force effects and the helical motions generated in the branch flows as the flow proceeded toward the outer wall. While the PIV images from the $1K{\ast}1K$ camera were closer to the simulation results thantheimagesfromthe640${\ast}$480camera,bothresultsofthePIVexperimentsusingthetwocamerasgenerallyagreed quitewellwiththeresultsfromthenumericalsimulation.

• 오토저널
• /
• 제10권3호
• /
• pp.51-59
• /
• 1988

The wake structure behind a van type vehicle was studied experimentally with a 5-hole yawhead probe. Through an effective calibration method of the 5-hole yawhead probe, the flow properties such as velocity vector, total pressure and static pressure were obtained on two cross sections within the wake. These results combined with the surface flow visualization performed in the previous study, yielded some information about the wake structure. When the model was placed in a stream with zero yaw angle, two counter rotating vortices were observed behind the model which pull down the surface flow on each side of the model. With increasing the yaw angle, the surface flow on the windward side changed to divide the flow in two directions, one flows upward on the upper part and the other flows downward on the lower part of the windward side. Hence a new weak vortex was created on the upper windward side, which resulted 3 vortices within the wake. The size and the strength of the vortices increased with yaw angle.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제1권2호
• /
• pp.101-107
• /
• 2009

The VIV (Vortex-Induced Vibration) analysis of a flexible cylindrical structure under locally strong shear flow is presented. The model is made of Teflon and has 9.5m length, 0.0127m diameter, and 0.001m wall thickness. 11 2-dimensional accelerometers are installed along the model. The experiment has been conducted at the ocean engineering basin in the University of Tokyo in which uniform current can be generated. The model is installed at about 30 degree of slope and submerged by almost overall length. Local shear flow is made by superposing uniform current and accelerated flow generated by an impeller. The results of frequency and modal analysis are presented.

• 품질경영학회지
• /
• 제31권1호
• /
• pp.21-41
• /
• 2003

The purpose of this research is to identify if psychological temptation, site quality and sense of community influence user's flow and addiction and if causalities among flow, addiction, customer satisfaction and customer loyalty are different between Korean and Japanese online games. To perform our research, we use MCSF(Multi-group Confirmatory Factor Analysis) and MSEM(Multi-group Structural Equation Model). The empirical results of SEM(Structural Equation Model) including high-order factor analysis indicate that all of paths in our model are the same for both countries. Therefore, site quality and sense of community have impacts on the flow, while on the other hand, psychological temptation has impacts on the addiction. Customer satisfaction and loyalty are positively related not with the addiction but with the flow. In addition, customer loyalty is significantly influenced by the flow and the customer satisfaction. In Conclusion, the empirical results of MSEM(Multi-group Structural Equation Model) indicate sense of community to flow, flow to loyalty and customer satisfaction to loyalty are different between Korea and Japan. This indicates that companies to penetrate into Japa online game industry should have a concern with Japanese Social and Cultural features and to develop strategies which correspond with Japanese culture.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제17권8호
• /
• pp.2101-2123
• /
• 2023

Recent studies have shown that the neural network-based binary code similarity detection technology performs well in vulnerability mining, plagiarism detection, and malicious code analysis. However, existing cross-architecture methods still suffer from insufficient feature characterization and low discrimination accuracy. To address these issues, this paper proposes a cross-architecture binary function similarity detection method based on composite feature model (SDCFM). Firstly, the binary function is converted into vector representation according to the proposed composite feature model, which is composed of instruction statistical features, control flow graph structural features, and application program interface calling behavioral features. Then, the composite features are embedded by the proposed hierarchical embedding network based on a graph neural network. In which, the block-level features and the function-level features are processed separately and finally fused into the embedding. In addition, to make the trained model more accurate and stable, our method utilizes the embeddings of predecessor nodes to modify the node embedding in the iterative updating process of the graph neural network. To assess the effectiveness of composite feature model, we contrast SDCFM with the state of art method on benchmark datasets. The experimental results show that SDCFM has good performance both on the area under the curve in the binary function similarity detection task and the vulnerable candidate function ranking in vulnerability search task.