• Journal of Korea Multimedia Society
• /
• v.13 no.6
• /
• pp.849-864
• /
• 2010

This paper proposes a multipath routing protocol called cross-layer multipath AODV (CM-AODV) for wireless ad hoc networks, which selects multiple routes on demand based on the signal-to-interference plus noise ratio (SINR) measured at the physical layer. Note that AODV (Ad hoc On-demand Distance Vector) is one of the most popular routing protocols for mobile ad hoc networks. Each time a route request (RREQ) message is forwarded hop by hop, each forwarding node updates the route quality which is defined as the minimum SINR of serialized links in a route and is contained in the RREQ header. While achieving robust packet delivery, the proposed CM-AODV is amenable to immediate implementation using existing technology by neither defining additional packet types nor increasing packet length. Compared to the conventional multipath version of AODV (which is called AOMDV), CM-AODV assigns the construction of multiple paths to the destination node and makes it algorithmically simple, resulting in the improved performance of packet delivery and the less overhead incurred at intermediate nodes. Our performance study shows that CM-AODV significantly outperforms AOMDV in terms of packet delivery ratio and average end-to-end delay, and results in less routing overhead.

• The KIPS Transactions:PartC
• /
• v.15C no.4
• /
• pp.281-288
• /
• 2008

Recently, the advance of multimedia hardware has fostered the development of wireless multimedia sensor network which is able to ubiquitously obtain multimedia content such as image or audio from the environment. The multimedia data which has several characteristics such as large size and correlation between the data requires reliability in transmission. However, the existing solution which take the focus on the efficiency of network mainly, is not appropriate to transmit the multimedia data. In the paper, we proposes a reliable asynchronous image transfer protocol, RAIT. RAIT applies double sliding window method in node-to-node image tansfer to prevent the packet loss caused by network congestion. The double sliding window consists of one sliding window for the receiving queue, which is used for prevention of packet loss caused by communication failure between nodes and the other sliding window for the sending queue which prevents the packet loss caused by network congestion. the routing node prevents the packet loss and guarantees the fairness between the nodes by scheduling the packets based on the image non-preemptively. The RAIT implements the double sliding window method by cross layer design between RAIT layer, routing layer, and queue layer. The experiment shows that RAIT guarantees the reliability of image transmission compared with the existing protocol.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.3
• /
• pp.91-99
• /
• 2009

Development of high-speed Internet services and the increased supply of mobile devices have become the key factor for the acceleration of ubiquitous technology. WiBro system, formed with lP backbone network, is a MBWA technology which provides high-speed multimedia service in a possibly broader coverage than Wireless LAN can offer. Wireless telecommunication environment needs not only mobility support in Layer 2 but also mobility management protocol in Layer 3 and has to minimize handover latency to provide seamless mobile services. In this paper, we propose a fast cross-layer handover scheme based on signal strength prediction in WiBro environment. The signal strength is measured at regular intervals and future value of the strength is predicted by Exponential Smoothing Method. With the help of the prediction, layer-3 handover activities are able to occur prior to layer-2 handover, and therefore, total handover latency is reduced. Simulation results demonstrate that the proposed scheme predicts that future signal level accurately and reduces the total handover latency.

• International Journal of Contents
• /
• v.2 no.2
• /
• pp.10-16
• /
• 2006

In this paper, we propose a predictive resource metric region (RMR) based radio resource metric estimation (RRME) mechanism, which utilizes a resource metric mapping function (RMMF), both of which permit efficient inter-working between the physical layer and higher layers for envisaging multimedia service applications over a CDMA communication system platform. The RMR can provide the acceptable resource region where QoS and acceptable link quality can be guaranteed with an achievable resource margin to be utilized in terms of capacity margin, the degree of confidence (DCL) of user, second-order statistics of Eb/Io. With predicted capacity margin and variance, DCL can deliver decision parameters with which an adaptive QoS based admission control can perform well taking capacity and resource availability into account in a dynamic and predictive manner. Combined with advanced techniques such as adaptive modulation or rate control and power control, the proposed mechanism can adjust the conventional stringent link quality information efficiently, and deliver accurate information of the resource availability. Thus, these can guarantee the maximization of resource utilization of multimedia service applications.

• Journal of Korea Multimedia Society
• /
• v.12 no.7
• /
• pp.997-1005
• /
• 2009

In this paper, we suggest an energy-efficient clustering scheme based on cross-layer design in wireless sensor networks. The proposed scheme works adequately for the characteristic environment of the networks. In the proposed clustering scheme, we separate clusters composed of sensor nodes in the event area from clusters of the other area when an event occurs by using an application layer information. We can save energy from multiple paths through multiple clusters to deliver the same event. We also suggest TDMA scheduling for non-evented clusters. In the scheduling, we allocate one time slot for each node to save energy. The suggested clustering scheme can increase the lifetime of the entire network. We show that our scheme is energy efficient through simulation in terms of the frequency of event occurrences, the event continual time and the scope.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.1
• /
• pp.96-103
• /
• 2009

This paper presents a L3 mobile terminal platform of the mobile terminal system which is a subsystem of HMm(Hig-speed Mobile Multimedia) system, which layer 3 control protocols such as RC(Radio Control), SC(Session Control), MC(Mobility Control) and application services such as VOD, FTP, VoIP for a multimedia mobile terminal are implemented on. The hardware platform is based on PXA255 and supports various interfaces and multimedia devices, and under the platform, an embedded Linux generated by the self-maden cross-toolchain, L3 control protocols and application programs were installed. The operation of HMm system under the HMm testbed has shown that this platform successfully supported SIP services, web browsing services, streaming services and etc as well as call processing. It could be the reference of the upcoming Fourth-Generation mobile terminal which the multimedia functionality will be enforced.

• Journal of Broadcast Engineering
• /
• v.16 no.5
• /
• pp.797-800
• /
• 2011

The objective of MPEG Media Transport (MMT), which is on going standard, is to develop efficient delivery of media over packet based networks in an adaptive, progressive, download/streaming fashion over various IP based networks, including terrestrial, satellite and cable broadcast networks. In this paper we introduce utilization of signal strength information based on Cross Layer Design(CLD) to efficient multimedia delivery over wireless network in which in practice the wireless conditions can vary significantly. Many recent studies have shown that a significant improvement in wireless video throughput can be achieved by utilizing signal strength information on CLD [1][2]. Despite of its usefulness, however, it was difficult to employ signal strength information in rate adaptation applications due to different representation of signal strength information for each underlying wireless network. To that end, we proposed syntax and semantics of signal strength information in such a way that the information can be interpreted in the unified way. The proposed signal strength information was proposed for the MMT standardization.

• Journal of Korea Multimedia Society
• /
• v.12 no.11
• /
• pp.1593-1608
• /
• 2009

If a certain relay node in multi-hop wireless networks might become a malicious node that does not cooperate with other nodes or a selfish node, network throughput will be dramatically decreased. Most of existing ad hoc routing protocols assuming that the nodes will fully cooperate with other nodes do not resolve the problem of network performance degradation due to malicious and selfish nodes. This paper presents the CARE (Cooperative Ad hoc routing protocol based REputation) scheme incorporating the reputation management that can achieve a multi-hop wireless network with high throughput performance. The proposed scheme provides the horizontal cross-layer approach which can identify misbehaving malicious, selfish nodes dropped out of the hop-by-hop based packet processing in the network and then set up an optimal packet routing path that will detour misbehaving nodes. And the vertical cross-layer approach contained in the CARE scheme attempts to improve the quality of routing paths by exploiting the quality of link information received from the MAC layer. Besides, it provides high TCP throughput by exploiting the reputation values of nodes acquired from the network layer into the transport layer. A case study on experiments and simulations shows that the CARE scheme incorporating vertical and horizontal cross-layer approaches yields better performance in terms of the low rate of packet loss, fast average packet delivery time, and high TCP throughput between end-to-end nodes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.11B
• /
• pp.968-980
• /
• 2008

Providing handover with guaranteed QoS for real-time multimedia service such as VoIP, video/audio streaming, and video conferencing in wireless LAN is a challenging task. In this paper, we present efficient layer 2 handover mechanism in wireless LAN, which can provide fast handover with guaranteed QoS for real-time multimedia service. To this end, the scanning period and the number of channels per scanning for handover are dynamically adapted to the type of applications and wireless networking environment, so that both the degradation of application service quality and signaling overhead are minimized simultaneously. The performance of the proposed mechanism is verified by the simulation. The simulation results show that the proposed mechanism guarantess QoS of each multimedia application with minimal power consumption.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.247-248
• /
• 2008

A recent dynamic increase in demand for wireless multimedia services has greatly accelerated the research on dynamic channel adaptation of high quality video applications. In this paper, we explore a theoretical approach to cross-layer optimization between multimedia and wireless networks by means of a quality criterion termed "visual throughput" for downlink video transmission using a layered coding algorithm. We obtain the optimal loading ratio of orthogonal frequency division multiple access (OFDMA) subcarriers through an optimization problem balancing the trade-off relationship between inter-cell interference (ICI) and channel throughput. In the simulation, we show that the visual throughput gain at the cell boundary is increased by about 32%.