• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.220-225
• /
• 2003

In order to develop a method of corrosion fatigue design and estimate reliability of TMCP steel using as the material of heavy industries and plants, its corrosion susceptibilities and corrosion fatigue life considering corrosion degradation were investigated. From the results, the corrosion characteristic of TMCP steel is very susceptible in 3.5wt.% NaCl solution. Its susceptibility was linearly increased with the solution temperature increase. The potential difference due to the crack growth behavior in $25^{\circ}C$, 3.5wt.% NaCl solution is very susceptible. And it was found that stress amplitude has a linear relationship with the critical potential. Therefore, it is expected that the corrosion fatigue life of TMCP steel can be nondestructively predicted using the DCPD method.

• 환경생물
• /
• 제40권3호
• /
• pp.247-254
• /
• 2022

본 연구는 자연에서 채집한 불볼락(Sebastes thompsoni)을 대상으로 고 수온 노출에 따른 생물의 행동반응 및 내성 한계(tolerance limit)를 규명하기 위하여 연속적으로 행동관찰이 가능한 추적시스템을 사용하여 노출 수온구간별 행동패턴의 변화, 임계 수온범위 및 아치사 행동반응을 분석하였다. 실험 결과, 대조수온(15.0℃)을 20.0℃로 높였을 때, BI (behavioral index)는 노출 초기 10시간 동안 일시적으로 증가하였으나 60~70시간 동안 뚜렷한 행동의 변화 없이 일정한 속도로 안정된 유영 패턴을 보였다. 그러나, 25℃에서는 활동량의 급격한 저하, 30℃에서는 활동성 지연과 정지행동 등과 같은 비정상적 유영 및 대사활동 교란이 확인되었으며, 온도의 상승에 따라 개체의 사망률이 높아지는 경향을 보였다. 이러한 결과는, 불볼락의 수온에 대한 내성한계는 25.0~30.0℃이며 생존에 큰 영향을 미치는 수온은 30.0℃ 부근임을 나타낸다. 본 연구의 결과가 효과적인 불볼락의 양식을 위한 환경 조건 설정에 도움을 줄 것으로 기대한다.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제6권4호
• /
• pp.274-278
• /
• 2001

Polymer membranes composed of N, N-dimethylaminoethyl methaccrylate(DMAEMA) and acrylamide(AAm)(or ethyl acrylamide(EAAm) were prepared to demonstrated the thermo-control of solute permeation. Poly DMEMA has a lower critical solution temperature(LCST) at around 50$\^{C}$ in water, With the copolymerization of DMAEMA with AAm (or EAAm) a shift in the LCST to a lowere temperature was observed, probably due to the formation of hydrogen bonds between the amide and N-N-dimethylamino groups. However, the temperature-induced phase transition of poly(DMAEMA-co-EAAm) did not show a similar trend to that of poly(DMAEMA- co-AAm) in the gel state. The hydrogen bonds in poly(DMAEMA-co-EAAm) were significantly disrupted with the formation a gel network, which led to a difference in the swilling behavior of polymer gels in response to temperature. To apply these polymers to temperature-sensitive sol-ute permeation, polymer membranes were prepared. The permeation pattern of hydrocortisone, used as the model solute, was explained based on the temperature-sensitive swelling behavior of the polymer membranes.

• Progress in Superconductivity
• /
• 제6권1호
• /
• pp.24-31
• /
• 2004

Magnetic $T_{c}$ of composite superconductors has been studied for providing a standard method. Various magnetization-temperature curves of NbTi, $Nb_3$Sn and Bi-2223 wires were measured using a SQUID magnetometer. Magnetization-temperature curve of zero-field-cooled procedure showed larger values than fie Id-cooled procedure. To obtain higher resolution near the onset temperature, we employed a two-field-direction method which measures a magnetization-temperature curve of a specimen first in positive and then negative fields. Analytical comparison of the magnetic $T_{c}$, with the resistive T$_{c}$ was accomplished for three specimens. The magnetic $T_{c}$/ mettled showed more detailed information on superconducting state of a specimen than the resistive$T_{c}$/ method. We have also studied the field dependence of the magnetic $T_{c}$ from 5 Oe to 120 Oe, however, no significant difference on field strength was found in our three specimensns

• Corrosion Science and Technology
• /
• 제13권3호
• /
• pp.95-101
• /
• 2014

The pitting corrosion behaviors between the constituent phases in F53 super duplex stainless steel (SDSS) in acidified chloride environments were investigated using a critical pitting corrosion temperature test, a potentiodynamic anodic polarization test, and the microstructure analyses through a SEM-EDS and a SAM. As the solution annealing temperature decreased from $1150^{\circ}C$ to $1050^{\circ}C$, the ${\gamma}$-phase fraction increased whereas the ${\alpha}$-phase fraction decreased. The pitting potential and the critical pitting temperature increased with a decrease of solution annealing temperature, thereby increasing the resistance to pitting corrosion. The pitting corrosion of the SDSS was selectively initiated at the ${\alpha}$-phases because the PREN (pitting resistance equivalent number, PREN = %Cr+3.3%Mo+30%N) value of the ${\gamma}$-phase is much larger than that of the ${\alpha}$-phase, irrespective of the solution annealing temperature. The pitting corrosion was finally propagated from the ${\alpha}$-phase to the ${\gamma}$-phase. The decrease of solution annealing temperature enhanced the resistance to pitting corrosion greatly in acidified chloride environments due to a decrease of PREN difference between the ${\gamma}$-phase and the ${\alpha}$-phase, that is, a decrease of $PREN{\gamma}$ by dilution of N in ${\gamma}$-phase with an increase in the ${\gamma}$-phase volume fraction and an increase of $PREN{\alpha}$ by enrichment of Cr and Mo in the ${\alpha}$-phase with a decrease in the ${\alpha}$-phase volume fraction.

• 한국환경과학회지
• /
• 제19권6호
• /
• pp.787-797
• /
• 2010

Nowadays meteorological information is systemized as a useful knowledge which has a significant effect on the overall industrial domains over the simple data. The distribution industry, which has the short life cycle, depends on the meteorological information at the strategic level. However, it is necessary to pay attention to the continuous investment in meteorological information because there is a hostility to paying for a service, particularly it does not provide accurate and reliable information. Therefore, the purpose of this study is to increase the usefulness of meteorological information in the distribution industry for its economic effectiveness from the core meteorological factors. We found significant meteorological factors (temperature, precipitation, disaster) that have a critical influence on the distribution industry through the hierarchical analysis process, and their importance according to the type of distribution channels, such as department store, large-scale discount store, convenience store, and home shopping. We performed the AHP analysis with 103 survey samples by middle managers from the various distribution channels. We found that precipitation is the critical meteorological factor across the distribution industry. Based on this result, we stress the difference in the level of the meteorological information in order for the effectiveness of each type of distribution channels.

• 수산해양기술연구
• /
• 제59권1호
• /
• pp.35-43
• /
• 2023

Sensory evaluation of shucking pressure, pressure holding time, seeding method, difference in full shucking rate in the aquaculture area and shucking oyster was performed using an ultra-high pressure oyster shucking machine. The reaching time for each target pressure is 2.2-2.4 MPa/sec in the range of 180 MPa to 240 MPa. had a rate of pressure rise. There was a difference of 0.5-1.7℃ in the range of 24-27℃ in the seawater temperature before and after the pressure treatment inside the pressure vessel, but there was no specific increase or decrease in seawater temperature. When only the shucking pressure is increased without the pressure holding time, the critical shucking pressure at which the oyster shell is opened and the flesh is peeled in the range of 200 to 220 MPa. When the critical shucking pressure is reached, the oyster sample in the closed vessel is expected to be shucked by about 40%. If there is no pressure holding time when judged only by full shucking, an increase in pressure of about 1.5 MPa is required to further shuck 3% of the oyster population. The oyster samples cultivated in the south coast of Korea were subject to full shucking under the conditions of 220 MPa shucking pressure and two minutes (120 seconds) of pressure holding time, and the difference in the pressure of the oysters according to the oyster seeding method and the farming area was minute. Finally, the condition of 220 MPa of shucking pressure and three minutes of pressure holding time was the best at 1.52 when the result of the sensory evaluation performed manually was set to 1.0. Next was 1.4 under the conditions of 220 MPa of shucking pressure and one minute of pressure holding time (60 seconds), and 1.3 under the condition of 220 MPa and two minutes of pressure holding time (120 seconds). Therefore, it is considered that the most desirable shucking conditions, considering the efficiency and sensory evaluation results, are the conditions of 220 MPa shucking pressure and two to three minutes of pressure holding time.

• 열처리공학회지
• /
• 제14권3호
• /
• pp.155-159
• /
• 2001

The thermal shock resistance has been investigated and compared in three hot-work tool steels. The resistance to thermal shock is first of all a matter of good toughness and ductility. Therefore, a proper hot-work tool steel should be characterized by high fracture strength and high temperature toughness. In this study, new test method is proposed to measure the thermal shock resistance. New method is basically based on Uddeholm' thermal shock test but some modification has been properly applied. Based on these results, some critical temperature($T_{fractures}$) at which fracture occur can be measured to characterize the thermal resistance of the materials. The specific values of ${\Delta}T$, the temperature difference between holding temperature and $T_{fractures}$, has been successfully used as a measure of the thermal shock resistance in this study, the results showed that the thermal shock method used in this study was properly modified.

• 농업과학연구
• /
• 제49권2호
• /
• pp.331-339
• /
• 2022

Deforestation and conservation of coniferous forest have been recognized as critical issues in Korea due to climate change. The main purpose of this research was to monitor changes of secondary metabolite contents and growth of Korean fir (Abies koreana) according to the temperature change in Mt. Halla. The Korean fir located at three different regions, Yeongsil, Witseoreum, and Jindallaebat, was monitored in April, July, and October from 2016 to 2018 and secondary metabolites, specifically lutein, α-carotenoid, and β-carotenoid, were analysed with high performance liquid chromatography. The results showed that average concentrations of lutein, α-carotenoid, and β-carotenoid were 0.82 - 23.30, 0.02 - 2.01, and 0.11 - 2.84 ㎍·g-1 and the highest concentration of secondary metabolite was observed in October compared to April and July. The average length and width of Korean fir in the three regions were 11.84 - 20.70 and 1.78 - 2.41 mm from 2016 - 2018. A correlation analysis showed that the concentrations of all three secondary metabolites were negatively correlated with temperature and a significant difference was observed between temperature and lutein concentration in Korean fir. Overall, growth and production of secondary metabolites in Korean fir highly depended on the temperature, and global warming thus might have an adverse effect on the growth and physiological changes of Korean fir in Mt. Halla.

• KSTLE International Journal
• /
• 제8권1호
• /
• pp.11-15
• /
• 2007

The mechanical face seal has been tested in Korea Aerospace Research Institute (KARl) for turbopump applications. In the turbopump under current development, the mechanical face seal is installed between fuel pump and turbine to prevent a mixture of fuel and combustion gas. Generally the mechanical face seal in turbopump is exposed to severe environment because of great rotational speed, high temperature of combustion gas and high level of pressure difference. Thus a series of tests were performed to guarantee the reliability of mechanical face seal by means of simulating the practical operating conditions. The tests were conducted up to 20,000 rpm with pressure difference of 800 kPa and temperature of 620 K In addition several carbon materials for mechanical face seal were conducted to the tests to compare the life time. During the tests, the performance against leakage was monitored and the carbon wear was also measured to estimate the life of a mechanical face seal The results show that the leakage flow rates of mechanical face seal is ignorable compared to an overall flow rate of fuel pump. The carbon material which has the finest wear resistance was found during the tests. Lastly no critical failure of mechanical face seal was found during the tests and the reliability of mechanical face seal for turbopump was successfully proved.