• 한국항공우주학회지
• /
• 제36권7호
• /
• pp.688-694
• /
• 2008

볼 베어링과 펌프 비접촉 실의 동특성을 고려하여 고추력 액체 로켓 엔진용 터보펌프의 회전체동역학 해석이 수행되었다. 회전 고유진동수와 감쇠비를 예측하기 위하여 회전속도에 따른 복소 고유치 해석이 수행되었다. 동기 회전체 질량 불평형 응답과 시간 과도 응답 해석을 통하여 회전체의 임계속도와 불안정 운전 시작 속도가 확인되었다. 수치 해석 결과로부터 후방 베어링 강성이 임계속도와 불안정성 예측에 있어서 가장 중요한 인자로 확인되었는데, 이는 1차 모드가 터빈부 회전축 굽힘 모드인 것에 기인한다. 임계속도에 있어서 펌프 실의 영향은 후방 베어링 강성이 감소할수록 그리고 전방 베어링 강성이 증가할수록 확대되는 것으로 나타났다.

• 한국항공우주학회지
• /
• 제34권6호
• /
• pp.92-97
• /
• 2006

케이징 구조 유연성을 고려한 30톤 추력급 터보펌프에 대한 임계 속도 해석이 수행되었다. 로터와 케이징을 포함한 전체 모델에 대한 3차원 유한요소법이 회전체 동역학 특성을 예측하기 위하여 적용되었다. 케이징 구조 유연성의 영향을 고찰하기 위하여 로터 단독 모델과 고정-고정 및 자유-자유 경계조건을 갖는 로터-케이징 연계 모델에 대한 수치 해석이 이루어 졌다. 무부하 하중 조건과 부하 하중 조건에서의 볼 베어링 강성이 각각 진공 조건과 실제 엔진 장착 조건에서의 작동을 모사하기 위하여 사용되었다. 수치해석 결과로부터 케이징 구조 유연성의 영향이 터보펌프의 임계 속도를 감소시킴을 확인하였다. 특히, 높은 베어링 강성을 갖는 부하 로터 조건에서 낮은 베어링 강성을 갖는 무부하 로터 조건에 비하여 더 많은 영향을 받음을 알 수 있었다.

• 대기
• /
• 제18권3호
• /
• pp.207-224
• /
• 2008

Severe downslope windstorms observed at Gangneung, Korea in the springtime during the last 30 years are studied to understand their generation mechanisms. 92 severe wind cases are selected for which the maximum instantaneous wind speeds exceed two standard deviation of total mean plus ($18.7ms^{-1}$). They are categorized into the three mechanisms (hydraulic jump, partial reflection, and critical-level reflection) proposed in previous studies based on the flow condition, which is calculated using the wind and temperature profile observed at one upstream rawinsonde station, Osan. Among the three, partial reflection is found to be the most frequent mechanism for the last 30 years (1976 - 2005). To understand the role of inversion in generating severe downslope windstorms, horizontal velocity perturbation was calculated analytically for the atmosphere with an inversion layer. It turned out that the intensity of downslope wind was increased by inversion layer of specific heights, which are well matched with the observations. For better understanding the generation mechanisms, two-dimensional numerical simulations are conducted for the 92 severe wind cases using the ARPS model. In most simulations, surface wind speed exceeds the value of the severe-wind criterion, and each simulated case can be explained by its own generation mechanism. However, in most simulations, the simulated surface wind speed is larger than the observed, due to ignoring the flow-splitting effect in the two-dimensional framework.

• 한국소음진동공학회논문집
• /
• 제12권5호
• /
• pp.380-388
• /
• 2002

This paper describes the optimum design for low-pressure steam turbine rotor of 1,000 MW nuclear power plant by using a combined genetic algorithm, which uses both a genetic algorithm and a local concentrate search algorithm (e.g. simplex method). This algorithm is not only faster than the standard genetic algorithm but also supplies a more accurate solution. In addition, this algorithm can find the global and local optimum solutions. The objective is to minimize the resonance response (Q factor) and total weight of the shaft, and to separate the critical speeds as far from the operating speed as possible. These factors play very important roles in designing a rotor-bearing system under the dynamic behavior constraint. In the present work, the shaft diameter, the bearing length, and clearance are used as the design variables. The results show that the proposed algorithm can improve the Q factor and reduce the weight of the shaft and the 1st critical speed.

• 한국자동차공학회논문집
• /
• 제23권1호
• /
• pp.18-24
• /
• 2015

In this study, a $CO_2$ air-conditioning system was investigated with different types of electrically driven compressors, parallel flow type gas cooler, four-pass type evaporator, internal heat exchanger integrated with accumulator, and electric expansion valve. The experimental study was conducted under various operating conditions (ie., different rotational compressor speeds, air inlet temperatures and air velocity coming into heat exchangers). The experimental results showed the cooling capacity was 3.5kW at $35^{\circ}C$ ambient temperature when the vehicle was idle (ie., the worst condition for cooling off the gas cooler). In terms of performance effect of the compressor, the e-RP model had a slightly better cooling capacity and coefficient of performance than the e-GR model under the same test conditions. An experimental equation for optimum cooling-performance control was also suggested based on the results. A high-pressure control algorithm for the super critical cycle was determined to achieve both maximum cooling performance and efficient energy consumption. The results from the experimental equation coincided with those of previous experimental studies.

• Tribology and Lubricants
• /
• 제16권3호
• /
• pp.157-165
• /
• 2000

A discharge free Electro-Rheological Squeeze Film Damper (ER-SFD) with predetermined-clearances at leakage ends can inherently eliminate electric discharge problems while still supplying stable leakage control. Test results show that the damping force of the slotted-ring ER-SFD is mainly affected by electric voltage, oil supply pressure, position of the damper and ratio of effective surface area of slotted-rings. As the supply voltage is larger, the amplitudes of both slotted ER-SFD and rotor are decreased at first and second critical speeds. The influence of the oil supply pressure and the effective surface area ratio was shown mainly near the first critical speed. The effective surface area ratio of slotted-rings influences the reduction of flexible rotor vibration. As a result, experimental results confirm that the slotted-ring ER-SFD satisfactorily controls the flexible rotor vibration, while eliminates the inherent electric discharge problems in conventional ER-SFDs.

• Wind and Structures
• /
• 제4권6호
• /
• pp.505-518
• /
• 2001

Shantou Bay Bridge is the first long-span suspension bridge in China. Because of its location near the Shantou Seaport and its exposure to high typhoon winds, wind-resistant studies are necessary to be made. In this paper, critical flutter wind speeds and buffeting responses of this bridge at its operation and main construction stages are investigated. The Buffeting Response Spectrum method is first briefly presented. Then the sectional model test is carried out to directly obtain the critical flutter wind speed and to identify the flutter derivatives, which are adopted for the later analysis of the buffeting responses using the Buffeting Response Spectrum method. Finally the aeroelastic full bridge model is tested to further investigate the dynamic effects of the bridge. The results from the tests and the computations indicate that the flutter and buffeting behaviors of the Shantou Bay Bridge are satisfied.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2000년도 제31회 춘계학술대회
• /
• pp.153-158
• /
• 2000

The purpose of present paper is to prove an improvement on stability of plane Journal bearing due to the leaf spring damper(LSD) experimentally A flexible rotor system is designed and manufackuea in order to generate oil whip instability of journal bearing at relative lower rotating speed. Vibration amplitude and instability onset speeds are investigated for a conventional plane journal bearing and plane journal bearing with LSD. To investigate the damping effects of LSD on stability of bearing, experiments are also conducted on the leaf spring dampers with and without working oil. It is found that the leaf spring damper can considerably increase the instability onset speed of a plane journal bearing.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.853-860
• /
• 2011

The societal interest on a faster transportation demands an increase of the train speed over the current operation speed of 350 km/h. However, the dynamic response in the roadbed of concrete track system subjected to the train speed ranging between 300 to 500 km/h has been systematically investigated. Herein, a series of the 2-dimensional numerical simulations using various train speeds were performed. A single wheel was modeled by the rigid body. The rail was attached to the sleepers via linear springs in parallel. The results show that the vertical displacement at the rail and track concrete layer exponentially increases when the train speed increases over 400 km/h. This conclusion implies an existence of the critical train velocity at which the displacement of the track system dramatically increases.

• Coupled systems mechanics
• /
• 제9권4호
• /
• pp.311-323
• /
• 2020

This paper deals with the effect of the mode shapes on the dynamic response of a multi-storey frame subjected to moving train loads which are modelled as loads of constant intervals with constant velocity using the finite element method. The multi-storey frame is modelled as a number of Bernoulli-Euler beam elements. First, the first few modes of the multi-storey frame are determined. Then, the effects of force span length to beam length ratio and velocity on dynamic magnification factor (DMF) are evaluated via 3D velocity-force span length to beam length ratio-DMF graphics and its 2D projections. By using 3D and 2D graphics, the directions of critical speeds that force the structure under resonance conditions are determined. Last, the mode shapes related to these directions are determined by the time history and frequency response graphs. This study has been limited by the vibration of the frame in the vertical direction.