• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1988년도 학술세미나 강연집
• /
• pp.3-67
• /
• 1988

Model studies on the response of homgeneous earth embankment dams subjected to strike-slip fault movement have been penomed via centrifuge and finite element analysis. The centrifuge model tests have shown that crack development in earth embankment experiences two major patters: shear failure deep inside the embankment and tension failure near the surface. The shear rupture zone develops from the base level and propagates upward continuously in the transverse direction but allows no open leakage chnnel. The open tensile cracks develop near the surface of the embankment, but they disappear deep in the embankment. The functional relationship has been developed based on the results of the centrifuge model tests incorporating tile variables of amount of fault movement, embankment geometry, and crack propagation extent in earth des. This set of information can be used as a guide line to evaluate a "transient" safety of the duaged embankment subjected to strike-slip fault movement. The finite element analysis has supplemented the additional expluations on crack development behavior identified from the results of the centrifuge model tests. The bounding surface time-independent plasticity soil model was employed in the numerical analysis. Due to the assumption of continuum in the current version of the 3-D FEM code, the prediction of the soil structure response beyond the failure condition was not quantitatively accurate. However, the fundamental mechanism of crack development was qualitatively evaluated based on the stress analysis for the deformed soil elements of the damaged earth embankment. The tensile failure zone is identified when the minor principal stress of the deformed soil elements less than zero. The shear failure zone is identified when the stress state of the deformed soil elements is at the point where the critical state line intersects the bounding surface.g surface.

• Steel and Composite Structures
• /
• 제16권6호
• /
• pp.703-718
• /
• 2014

The initial clamping forces of high strength bolts subjected to different faying surface conditions drop within 500 hours regardless of loading, any other external force or loosening of the nut. This study develops a mathematical model for relaxation confined to creep on a coated faying surface after initial clamping. The quantitative model for estimating relaxation was derived from a regression analysis for the relation between the creep strain of the coated surface and the elapsed time for 744 hours. This study establishes an expected model for estimating the relaxation of bolted joints with diverse coated surfaces. The candidate bolts are dacro-coated tension control bolts, ASTM A490 bolt, and plain tension control bolts. The test parameters were coating thickness, species of coating. As for 96, 128, 168, and $226{\mu}m$ thick inorganic zinc, when the coating thickness was increased, relaxation after the initial clamping rose to a much higher range from 10% to 18% due to creep of the coating. The amount of relaxation up to 7 days exceeded 85% of the entire relaxation. From this result, the equation for creep strain can be derived from a statistical regression analysis. Based on the acquired creep behavior, it is expected that the clamping force reflecting relaxation after the elapse of constant time can be calculated from the initial clamping force. The manufacturer's recommendation of inorganic zinc on faying surface as $75{\mu}m$, appears to be reasonable.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2009년도 학술논문요약집
• /
• pp.187-187
• /
• 2009

Opening of fractures induced by shear dilation or normal deformation can be a significant source of fracture permeability change in fractured rock, which is important for the performance assessment of geological repositories for spent nuclear fuel. As the repository generates heat and later cools the fluid-carrying ability of the rocks becomes a dynamic variable during the lifespan of the repository. Heating causes expansion of the rock close to the repository and, at the same time, contraction close to the surface. During the cooling phase of the repository, the opposite takes place. Heating and cooling together with the, virgin stress can induce shear dilation of fractures and deformation zones and change the flow field around the repository. The objectives of this work are to examine the contribution of thermal stress to the shear slip of fracture in mid- and far-field around a KBS-3 type of repository and to investigate the effect of evolution of stress on the rock mass permeability. In the first part of this study, zones of fracture shear slip were examined by conducting a three-dimensional, thermo-mechanical analysis of a spent fuel repository model in the size of 2 km $\times$ 2 km $\times$ 800 m. Stress evolutions of importance for fracture shear slip are: (1) comparatively high horizontal compressive thermal stress at the repository level, (2) generation of vertical tensile thermal stress right above the repository, (3) horizontal tensile stress near the surface, which can induce tensile failure, and generation of shear stresses at the comers of the repository. In the second part of the study, fracture data from Forsmark, Sweden is used to establish fracture network models (DFN). Stress paths obtained from the thermo-mechanical analysis were used as boundary conditions in DFN-DEM (Discrete Element Method) analysis of six DFN models at the repository level. Increases of permeability up to a factor of four were observed during thermal loading history and shear dilation of fractures was not recovered after cooling of the repository. An understanding of the stress path and potential areas of slip induced shear dilation and related permeability changes during the lifetime of a repository for spent nuclear fuel is of utmost importance for analysing long-term safety. The result of this study will assist in identifying critical areas around a repository where fracture shear slip is likely to develop. The presentation also includes a brief introduction to the ongoing site investigation on two candidate sites for geological repository in Sweden.

• 한국지반공학회논문집
• /
• 제16권1호
• /
• pp.51-64
• /
• 2000

본 연구는 강우의 침투로 인한 불포화 토사사면의 안정 해석을 위한 절차를 제시한다. 강우 침투로 인한 사면의 거동은 흐름과 변형이 연관된 이차원 유한요소해석을 통하여 해석된다. 시간에 따른 안전율을 계산하기 위하여 유한요소 해석법을 통한 응력장(stress field)으로부터 가상활동면에 대한 안전율을 산정할 수 있도록 하는 정교한 응력적분기법을 적용하였고 기하학적으로 허용가능한 활동단면의 형상을 유지하면서 합리적으로 임계단면을 찾아가는 최적화방법을 적용함으로써 강우에 의한 토사사면의 안정성 평가 절차를 개발하였다. 또한 이를 이용하여 강우침투시 투수계수의 공간적인 변화가 불포화토사사면의 파괴 거동에 미치는 영향을 보다 공학적이고 합리적인 방법으로 연구하였다. 연구결과에 의하면 투수계수의 불균질한 분포로 인하여 강우에 의한 사면표면의 국부적인 파괴영역이 발생할 수 있고 이러한 영역이 점점 확대되어 전체적인 파괴에 이르게 된다. 그러므로 시간의존적 인 사면안정해석 문제의 경우 이러한 국부적인 파괴 영역의 영향을 더 이상 무시할 수 없다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제15권2호
• /
• pp.136-143
• /
• 2011

고력볼트의 현장 조립시 볼트 구멍 간의 불일치로 인하여 볼트 구멍을 확장하는 경우가 빈번하게 발생하고 있으며, 이를 위해서 외국 기준에서는 볼트 구멍 크기, 형태, 하중 방향에 따라 미끄럼하중에 대한 규정을 따로 두고 있다. 그러나 우리나라의 경우 과대구멍에 대한 시방규정이나 이에 대한 접합부 특성에 관한 연구는 미흡한 실정이다. 따라서, 접합부재 표면처리와 볼트구멍 크기의 변화가 접합부 내력에 어떠한 영향을 미치는 지를 실험을 통해 정량적으로 평가할 필요가 있다. 본 연구에서는 볼트 구멍 크기 및 형태에 따른 접합부의 미끄럼하중의 변화와 체결 후, 장기축력이완의 경향을 분석하기 위하여 160시간 및 800시간 동안 고력볼트의 축력의 변화를 측정하였다. 본 실험대상 고력볼트로 KS B 2819에 규정된 TS(Torque Shear)형 고력볼트를 사용하였다. 표준 볼트구멍 대비 그 외 볼트구멍의 미끄럼하중의 변화는 10% 미만으로 나타났으며, 장기축력이완은 직경 2.5배의 슬롯구멍에서, 2.66%로 가장 높게 나타났다.

• 한국지반공학회지:지반
• /
• 제6권2호
• /
• pp.47-54
• /
• 1990

사면안정해석의 정확도는 흙의 강도특성과 사면의 기하학적 조건의 파악정도와 해석방법 본말 의 정확도에 지배된다. 그리고 대부분의 사면안정해절방법은 컴퓨터 프로그랙으로작성되어 있다. 국내에서 실용되고 있는 프로그램의 정확성을 비교한 것이다. 비교적 간단한 조건의 각 프로그램으로 얻은 안전률의 차리는 5% 이내이다. 요면에 관한 정확한 타보입수가 가능한 파괴사례 연구에서도 유사한 결과를 얻었다. 그러나 컴퓨터가 찾아낸 임계파괴면과 실제 파괴면은 약간 상리한 경우도 있었다. 이 때에도 두 활동면을 해석하여 구한 안전률 값은 대차 없이 거의 동일하였다. 결국 국내에서 사용되고 있는 사면안정해석 컴퓨터 프로그램은 그 실용성이 인정된다고 할 수 있다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 제5회 압연심포지엄 신 시장 개척을 위한 압연기술
• /
• pp.163-172
• /
• 2004

A fast, accurate model for calculating roll gap variables are critical to the implementation of computer based automation systems for cold rolling mills. Based on the work of Fleck and Johnson, rollgap simulator with non-circular arc model was developed using the influence function. This developed model is capable of predicting values of force, torque and slip which can be applied over the wide range of rolling conditions including cold rolling/DR/temper mill with high execution speed. Friction coefficient was obtained as a function of operation conditions through analyzing measured data. After combination of rollgap simulator with production strategy, draft schedule for No.3 RCM (Reversible Cold Rolling Mill) in Incheon works of Dongbu Steel was developed. This draft schedule will be installed in the setup computer of No.3 RCM replacing old Hitachi model.

• Steel and Composite Structures
• /
• 제20권3호
• /
• pp.671-692
• /
• 2016

FRP stay-in-place (SIP) formworks are designed as a support for casting concrete and as a tension reinforcement when concrete is cured. Bond development between SIP formwork and concrete is critical for FRP tension element to be effective. This paper reports the bond strength between FRP formwork and concrete for different interfacial treatments. A novel experimental setup is prepared for observing the bond behaviour. Three different adhesives with varying workability have been investigated. Along with the load-deformation characteristics, bond slip and strains in the formwork have been measured. A finite element numerical simulation was conducted for the experiments to understand the underlying mechanism. The results show that the adhesive bonding has the best bond strength.

• Geomechanics and Engineering
• /
• 제33권1호
• /
• pp.53-63
• /
• 2023

Rock disturbance caused by blasting and stress relaxation is commonly observed during excavation. As the distance from the source of disturbance increases, the degree of disturbance decreases, and rock at a large depth does not experience disturbance. However, in stability analyses, a single value of disturbance is often applied to the entire rock mass, which leads to underestimated results. In this study, this modeling mistake is addressed by considering realistically varying rock disturbance. The safety of infinite slopes in a disturbed rock mass with a strength governed by the Hoek-Brown failure criterion is investigated based on the kinematic approach of limit analysis. The maximum disturbance is assigned to the outermost slope face because it is directly exposed to blasting damage and dilation, and the disturbance progressively decays with distance in the rock mass. The safety analysis results indicate that the assumption of uniform disturbance in the entire rock mass leads to underestimation of the rock strength and safety on infinite rock slopes. A critical slip surface appears to be within the disturbed rock layer as well as the interface between the disturbed upper rock and undisturbed lower rock.

• 한국지반공학회논문집
• /
• 제30권4호
• /
• pp.35-45
• /
• 2014

사면의 안정성을 위한 한계평형해석은 간편함과 적용성 때문에 가장 널리 적용되고 있다. 이러한 간편한 방법으로 균질하지 않고 방향성 있는 지층 같은 다양한 지형조건을 해석하기에는 신뢰성과 설득력 있는 결과를 주기에 한계가 있다. 또한 지반굴착과 성토지반 같은 토사사면의 초기 응력상태나 응력경로와 같은 지반의 응력변화에 대해서 고려하지 못한다. 반면, 한계평형해석과는 다르게, 유한요소법에 의한 변형과 응력분포 해석은 시간에 따른 복잡한 하중단계와 탄성영역외의 범위를 다룰 수 있다. 본 연구에서는 불포화 토사사면에서 발생하는 얕은 파괴의 안전율 계산과 임계단면을 결정하는 방법을 제안한다. 유한요소해석은 유효응력 거동을 근간으로 각 요소들의 가우스 포인트에서 응력들이 계산되고 안전율이 가장 약한 지점들을 찾아 비선형 임계단면이 결정된다. 이러한 사면안정해석은 강우침투에 의해 변형되는 지반의 사면 표층파괴에 적합하게 계산된다. 침투에 의한 지반의 단위중량의 변화는 사면의 연직 및 수평변위에 영향을 주며, Drucker-Prager 파괴기준은 수리학-역학적인 연계된 불포화토의 거동 해석과 응력-변형률 관계를 위해 적용된다.