• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.32 no.2
• /
• pp.163-172
• /
• 1987

Results obtained from this study conducted to find the effect of wind-break net on reducing cold wind damage in the eastern coastal cold wind damaged area are summarized as follows. The rice critical safe heading date was up to Aug. 10 in the eastern coastal area, which the frequency of gale Aug. 10 to Sep. 10 is high. The frequencies of westries and cold wind from sea were 25%, respectively, in this area. The effects of wind-break net on reducing wind verocity were 26.9, 34,6% with raising air temperature of 0.4-0.7$^{\circ}C$ and water temperature of 0.3-0.5$^{\circ}C$. The effect of wind-break net was up to 10 time's distance of wind-break net's height from wind-break net. The installation of wind-break inhanced to rice growth, so showed the heading date earlier by 2-5days and increased culm length, no.of panicles per hill and no. of spiklets per panicle. The yield decrease in this area was due to sterilization, poor ripening and light 1,000 grain weight. The yields showed 20-28% increase by installation of wind-break net. The effect of wind-break net was most in the installation plot with wind-break net against cold wind from sea and westries installed in the panicle formation stage.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.21 no.4
• /
• pp.277-285
• /
• 2019

This study was conducted to understand the growth characteristics of Picea jezoensis that was one of representative subalpine species in Korea, in the light of the effects of wind and micro-topography in its habitats on Mt. Deogyu, Korea. The prevailing wind directions were southwest and west at the study sites. We randomly selected P. jezoensis (height ≥ 1.5 m) on windward, intermediate, and leeward slopes and measured diameter at breast height (DBH), height, crown length by 8 directions in upper, middle and lower sectors of the crown. We examined the micro-topography of P. jezoensis stood on and classified it into 3 types: type 1 was mounded and fully exposed to surrounding environments without neighboring trees; type 2 was somewhat wind-protected by surrounding rocks, but no neighboring vegetation; type 3 was on gentle slope or flat where P. jezoensis grew with neighboring trees or shrubs. The ratios of height to DBH, and estimated crown growth to actual crown growth (hereafter crown growth ratio) were compared among the three types of micro-topography on windward, intermediate and leeward sites. The height growth per DBH and crown growth ratio in the upper and middle crowns were the smallest on the windward site, and the highest on the leeward site (p < 0.01). The crown growth ratio on type 1 on the windward site was only 46% of that on type 3 on the leeward site. Although on the same windward slope, trees on type 1 had more deformed crown shapes than that on Type 3, showing asymmetric crown cross-sectional areas. Wind and micro-topography played critical roles on the crown growth of P. jezoensis.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.18 no.3
• /
• pp.135-142
• /
• 2015

Floating offshore structures should be designed by considering the most extreme environmental loadings which may be encountered in their design life. The most severe loading on a wave-offshore wind hybrid power generation system is wave loads. The principal parameters of wave loads are wave length, wave height and wave direction. The wave loads have different effects on the structural behavior characteristic depending on the combination of wave parameters. Therefore, the process of investigation for critical loads based on the individual wave loading parameter is need. Namely, the equivalent design wave should be derived by finding the wave condition which generates the maximum stress in entire wave conditions. Through a series of analysis, an equivalent regular wave height can be obtained which generates the same amount of the hydrodynamic loads as calculated in the response analysis. The aim of this study is the determination of equivalent design wave regarding to characteristic global hydrodynamic responses for wave-offshore wind hybrid power generation system. It will be utilized in the global structural response analysis subjected to selected design waves and this study also includes an application of global structural analysis.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.20 no.6
• /
• pp.489-500
• /
• 1987

Annual reproductive cycle of Bluegill, Lepomis macrochirus (RAFINESQUE) were studied in the natural population. Based on these informations, reproductive mechanism of the fish including activation, degeneration and remature were examined under the controlled conditions of temperature and photoperioe. In the natural populations, gonads began to grow with the temperature increase in March ana matured in June, and spawning occurred in July. With the onset of the shorter day-length and the maximum temperature condition in August, the gonads began to degenerate. Resting stage was continued during winter season. In the laboratory-reared population, activation of the gonads was initiated by the complex environmental factors including higher temperature$(>15^{\circ}C)$ and longer photoperiod $(>14L)$. For the maturation, photoperiod of more than 14 hours was critical. Under this condition higher temperature was the only compensative factor. Regeneration of the gonads was induced by higher temperature$(>25^{\circ}C)$ and the shorter photoperiod accelerated the regenerative processes. Even from the resting stage the gonads can be induced to matured stage by the longer photoperiod $(>15L)$. Based on these observations, the reproductive rhythm of this fish is supposed to be artificially controlled.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.13 no.2
• /
• pp.57-64
• /
• 1980

Seed tunicates of Halocynthia roretzi (v. DRASCHE) which were artificially settled in Chungmu area were transplanted to Seonyudo and Eochungdo to know the feasibility of the tunicate culturing in the western coast of Korea. From April 1978 to March 1979, the growth of the transplanted tunicate in the two area was compared and analyzed in reference to the ecological factors. At the time when the seeds were transplanted, the mean body height of Halocynthia roretzi(V. DRASCHE) was 1.84 mm, body breadth 1.42 mm, and the body weight 15.0 mg. After 333 days the mean body height was 10.77 mm, body breadth 6.75 mm, and body weight 201 mg in Seonyudo area. In Eochungdo area the mean body height was 13.5 mm, body breadth 11.51 mu and body weight 880 mg. According to above results, it is possible to culture the seeds in Eochungdo area. Salinity $(29.2-32.0\%_{\circ})$ was favorable, water temperature $(6.8-26.8^{\circ}C)$ was not a critical factor, but the growth of the tunicate was affected by the high temperature$(over\;25.0^{\circ}C)$ in July. Transparency lower than 1.0 m seriously affects the growth of the tunicate, and it was one of the important factors inhibiting the growth of the tunicate. Seonyudo area was found out to be inadequate for the culture of the sea spuirt Halocynthie roretzi because of the retarded growth in body breadth and weight while showing extended growth in body length then leading to higher mortality owing to large amount of silting and fouling of the colonial tunicate, Didemnum (didemnum) moseleyi.

• Child Health Nursing Research
• /
• v.20 no.2
• /
• pp.96-104
• /
• 2014

Purpose: Nurse educators can use film effectively to promote nursing students' motivation and indirect experiences. The purpose of this study was to develop a teaching-learning design using films based on Kolb's experiential learning model for understanding of child growth and development, and to evaluate students' satisfaction with cinenurducation according to learning type and content. Methods: Participants were seventy-four first year nursing students in the spring semester of 2013 at a private university located in Busan. In each class, participants watched film, participated in peer-to-group discussion and an educator's lecture, and wrote a composition based on Kolb's four learning stages. After class, participants filled out a questionnaire developed by the researchers. Results: Results showed a high satisfaction with cinenurducation regardless of learning type and content concerning child growth and development. Advantages of cinenurducation included it being "fun and interesting," "helpful to understand the characteristics of children," and "develop critical thinking through discussions." Disadvantages included "length of time needed," and "burdensome." Conclusion: Films are advantageous in that they provide indirect experience for nursing students. Selection of appropriate films and evaluation of learning goal achievements are important to maximize the effectiveness of cinenurducation.

• Journal of the Korean Chemical Society
• /
• v.38 no.8
• /
• pp.539-546
• /
• 1994

The critical micelle concentration(CMC) and the counterion binding $constant(\beta)$ at the CMC of cetyltrimethylammonium bromide(CTAB) in a series of aqueous solutions containing medium chain-length n-alcohols(Propanol, Butanol, Pentanol and Hexanol) have been determined from the concentration dependence of electrical conductance at serveral temperature from $17^{\circ}C\;to\;41^{\circ}C.$ Thermodynamic parameters $({\Delta}G^o_m,\;{\Delta}H^o_m,\;{\Delta}S^o_m,\;and\;{\Delta}C_p)$ associated with micelle formation of CTAB have been also estimated from the temperature dependence of CMC and $\beta$ values, and the significance of these parameters and their relation to the theory of micelle formation have been considered. The results show that an enthalpy-entropy compensation effect is usually observed for the micellization of CTAB. The effects of n-alcohols on the micellar properties (CMC and $\beta$) of CTAB solutions have been also investigated. The addition of n-alcohol to the CTAB solution in a small quantity decreases the CMC value and the counterion binding constant $(\beta)$ at the CMC, but the addition of n-alcohol in an excessive quantity increases the CMC values on the conterary. These results have been explained in terms of the effect of the micelle-solubilized alcohol on the micellar surface charge density.

• Korean Journal of Materials Research
• /
• v.10 no.12
• /
• pp.799-806
• /
• 2000

Cu$_{6}$Sn$_{5}$-dispersed 63Sn-37Pb solder bumps of 760$\mu\textrm{m}$ size were fabricated on Au(0.5$\mu\textrm{m}$)/Ni(5$\mu\textrm{m}$)/Cu(27$\pm$20$\mu\textrm{m}$) BGA substrates by screen printing process, and their shear strength were characterized with variations of dwell time at reflow peak temperature and aging time at 15$0^{\circ}C$ . With dwell time of 30 seconds at reflow peak temperature, the solder bumps with Cu$_{6}$Sn$_{5}$ dispersion exhibited higher shear strength than the value of the 63Sn-37Pb solder bump. With increasing the dwell time longer than 60 seconds, however the shear strength of the Cu$_{6}$Sn$_{5}$-dispersed solder bumps became lower than that the 63Sn-37Pb solder bumps. The failure surface of the solder bumps could be divided into two legions of slow crack propagation and critical crack propagation. The shear strength of the solder bumps was inversely proportional to the slow crack propagation length, regardless of the dwell time at peak temperature, aging time at 150 $^{\circ}C$ and the volume fraction of Cu$_{6}$Sn$_{5}$ dispersion.> 5/ dispersion.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.9
• /
• pp.31-37
• /
• 2000

An angular selectivity through the focused readout beam is geometrically analyzed and experimental results are presented. Based on the analysis of geometrical results, we derive a new relation that the angular selectivity depends on incident conditions of the readout beam and independent on the writing conditions. In order to demonstrate our theory, we investigate angular selectivity as functions of following factors: writing beam incident angle, readout beam width and lens focal length. From the experimental results, it is shown that the angular selectivities are 2.632$^{\circ}$, 2.618$^{\circ}$, 2.604$^{\circ}$ when the external half-crossing angles of writing beam are 8$^{\circ}$, 10$^{\circ}$, 14$^{\circ}$, respectively. Applying the same incident angle of the recording beam, angular selectivity is changed by the control of readout beam width and then their properties are 2.632$^{\circ}$, 0.588$^{\circ}$. From these results, we have known that the angular selectivity is very critical to incident conditions of readout beam.

• Magazine of the Korea Concrete Institute
• /
• v.4 no.1
• /
• pp.135-145
• /
• 1992

With the increasing tendency to construct high rise reinforced concrete building~i, it is required to use high strength materIals, smaller member sections, and larger reinforcing bars, I t is generally recognized that under severe seismic loads beam column jomts may become more critical structural components than other structural elements. In a ductile momentresistmg reinforced concrete frame, the connection of bearncolumn must be capable of resistll1g the large lateral forces caused by seismic actions, The purpose of this experimental study is to evaluate and ll1vestigate the earthquake resistant perform ance of beam-colurrm subassemblies constructed with high-strength concrete cast by the concrete of com¬pressive strength of 700kg / cm2 subjected to reversed cyclic loadings. New approaches for moving the plastic hinging zone away from the column face and preventing the di¬agonal crack in the joint region are adopted to advance the earthquake-resistant performance of beam-column subassemblies using high-strengh concrete under severe earthquake-type loading. Exper¬imental results indicate that the modified new details which are introduced by intermediate reinforcement in the beam over a specific beam length adjacent to the joint are able to attain the stable hysteretic behavior and the enhancement of earthquake-resistant performance. Keywords: high strength concrete: beam-column Joints; seirnic loads(reversed cyclic loading) : earth¬quake-resistant performance; plastic hinge zone: diagonal crack: intermediate reinforce¬ment ; closed strirrup: hysteretic behavior: enhancement .