• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.315-318
• /
• 1988

PHOTO-RESIST 자체문제로인해 감소되는 최소해상력, 촛집심도여유 및 CRITICAL DIMENSION (C.D.) 조정여유도등을 연구하였다. 기존에 사용중인 PHOTO-RESIST(큰 분자량)와 PHOTO-RESIST자체내에 CONTRAST 촉진 물질(CEM)이 첨가된것(INNER CEM TYPE) 및 PHOTO-RESIST구성성분중 작은 분자량/좁은 분자량 산포가 형성된 RESIN 의 PHOTO-RESIST(LOW MOLECULAR WEIGHT CONTROL TYPE)등 세가지 PHOTO-RESIST를 사용 하여 상기의 항목을 분석하였다. INNER CEM TYPE 및 LOW MOLECULAR WEIGHT CONTROL TYPE의 PHOTO-RESIST는 기존에 사용중인 RESIST보다, 최소 RESOLUTION은 약 0.2 - 0.3 um, DEPOCUS MARGIN은 약 0.8 - 1.2 um 및 C.D. CONTROL LATITUDE 향상된 것 등이 우수하였다.

• 중환자간호학회지
• /
• 제14권3호
• /
• pp.99-112
• /
• 2021

Purpose : This study aimed to comprehensively understand the work experience of the person in charge of the adequacy evaluation of small-and medium-sized hospitals and explore its meaning and essence in-depth. Methods : This was a descriptive qualitative study. The study participants were 10 nurses who understood the purpose of this study and participated voluntarily. Data collection was conducted via in-depth interviews in January 2021. The interviews were conducted 1-2 times per participant and lasted approximately 40-50 minutes per session. Data analysis was performed using a qualitative content analysis. Results : The work experience of the person in charge of the adequacy evaluation of small-and medium-sized hospitals included four themes: "difficulty in preparing for evaluation," "negative views on evaluation," "lack of a support system," and "positive improvements and changes due to an evaluation." Conclusion : Based on the above results, an education program and support system should be developed to strengthen the competence of nurses in charge of the adequacy evaluation of small- and medium-sized hospitals.

• 농촌의학ㆍ지역보건
• /
• 제48권3호
• /
• pp.189-204
• /
• 2023

Objectives: The goals of this study are to exploring critical factors and methods to improve Korean Community Care through the cases of GyeongsangNamdo. Methods: For this study, we performed in-depth interviews with 90 people involved in Community Care services of 6 regions, and the collected data were analyzed. The collected data were analyzed utilizing NVivo12. In the end, we reconfirmed the process through Topic Modeling analysis. Results: We conducted descriptive statistics and qualitative data analysis collected through surveys and in-depth interviews. In the case of qualitative analysis, we extracted principle codes (Need, Lack, Absence), and sorted the contents into sub-categories. The response rate of 'Need to strengthen capabilities' was the highest, 'Need to communicate and share information' was the second, and 'Need for integrated operation and a control tower' was the third. Conclusion: As a result, we find the critical factors to improve Community Care. Based on them, we should conduct follow-up researches to propose concrete methods to apply to diverse regions.

• 한국항해학회지
• /
• 제13권3호
• /
• pp.21-36
• /
• 1989

The submarine played an active part in military operation during the last of nineteenth century. Today, as an aid to science and technology and technology m the submarine is being utilized in the fields of deep sea investigation and sight-seeing as well as military activities. When the stability and the maneuverability of a submarine is studied, the problems arise on the vertical plane as well as the horizontal plane. However, the horizontal plane has been dealt with in the study of surface vessels. The author attempts to look into the hydrodynamic directional stability at high speeds (above 10knots) on the vertical plane, and to clarify the submarine's depth-rate as related to the factors that affect it : the distance from the center of buoyancy to the center of gravity, the speed of the submarine, and the position and the area ratio of hydroplane. In this study, the author considered the two groups of dimensionless derivatives of submarine. It is confirmed that the depth-rate of a submarine is decreased when the length, of BG is increased under the continuous submerging status. But the depth-rate is increased when the area ratio of hydroplane is enlarged. It is also confirmed that a submarine has only one critical speed in accordance with the shape of its hull, but unconcerned with its speeds.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2006년도 공동학술대회 논문집
• /
• pp.17-22
• /
• 2006

Shear modulus is directly linked to material's stiffness and is one of the most critical engineering parameters. Seismically, shear-wave velocity (Vs) is its best indicator. Although methods like refraction, down-hole, and cross-hole shear-wave surveys can be used, they are generally known to be tougher than any other seismic methods in field operation, data analysis, and overall cost. On the other hand, surface waves, commonly known as ground roll, are always generated in all seismic surveys with the strongest energy, and their propagation velocities are mainly determined by Vs of the medium. Furthermore, sampling depth of a particular frequency component of surface waves is in direct proportion to its wavelength and this property makes the surface wave velocity frequency dependent, i.e., dispersive. The multichannel analysis of surface waves (MASW) method tries to utilize this dispersion property of surface waves for the purpose of Vs profiling in 1-D (depth) or 2-D (depth and surface location) format. The active MASW method generates surface waves actively by using an impact source like sledgehammer, whereas the passive method utilizes those generated passively by cultural (e.g., traffic) or natural (e.g., thunder and tidal motion) activities. Investigation depth is usually shallower than 30 m with the active method, whereas it can reach a few hundred meters with the passive method. Overall procedures with both methods are briefly described.

• 한국결정성장학회지
• /
• 제26권3호
• /
• pp.121-125
• /
• 2016

The effect of temperature and pressure in the nitrogen ambient furnace on bulk micro defect (BMD) and denuded zone (Dz) is experimentally investigated. It is found that as pressure increases, Dz depth increases with a small decrease of BMD density in the range of temperature, $100{\sim}300^{\circ}C$. BMD density with hot isostatic pressure treatment (HIP) at temperature of $850^{\circ}C$ is higher than that without HIP while Dz depth is lower due to much higher BMD density. As the pressure increases, BMD density is increased and saturated to a critical value, and Dz depth increases even if BMD density is saturated. The concentration of nitrogen increases near the surface with increasing pressure, and the peak of the concentration moves closer to the surface. The nitrogen is gathered near the surface, and does not become in-diffusion to the bulk of the wafer. The silicon nitride layer near the surface prevents to inject the additional nitrogen into the bulk of the wafer across the layer. The nitrogen does not affect the formation of BMD. On the other hand, the oxygen is moved into the bulk of the wafer by increasing pressure. Dz depth from the surface is extended into the bulk because the nuclei of BMD move into the bulk of the wafer.

• Journal of Information Processing Systems
• /
• 제16권1호
• /
• pp.155-170
• /
• 2020

Passive ranging is a critical part of machine vision measurement. Most of passive ranging methods based on machine vision use binocular technology which need strict hardware conditions and lack of universality. To measure the distance of an object placed on horizontal plane, we present a passive ranging method based on monocular vision system by smartphone. Experimental results show that given the same abscissas, the ordinatesis of the image points linearly related to their actual imaging angles. According to this principle, we first establish a depth extraction model by assuming a linear function and substituting the actual imaging angles and ordinates of the special conjugate points into the linear function. The vertical distance of the target object to the optical axis is then calculated according to imaging principle of camera, and the passive ranging can be derived by depth and vertical distance to the optical axis of target object. Experimental results show that ranging by this method has a higher accuracy compare with others based on binocular vision system. The mean relative error of the depth measurement is 0.937% when the distance is within 3 m. When it is 3-10 m, the mean relative error is 1.71%. Compared with other methods based on monocular vision system, the method does not need to calibrate before ranging and avoids the error caused by data fitting.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2004년도 춘계종합학술대회
• /
• pp.623-626
• /
• 2004

본 논문은 주사형 전자 현미경을 사용하여 간단한 형태의 반도체 소자뿐만 아니라 집적회로의 내부 P-N 접합 층의 깊이를 소자를 파괴하지 않고 패키지 상태 그대로 측정 할 수 있는 방법이다. 전자 현미경에서 주사되는 전자빔의 에너지에다 반도체 내에 여기 되는 전류를 측정하여 이 임계치에서 전자빔의 침투 범위를 산출하여 접합의 깊이를 측정한다. 실제 시판되고 있는 소자를 사용하여 SEM 의 전자 주사빔 에너지를 변화시키면서 외부의 전류 변화를 측정하였다. 소자 내부의 전자와 정공 생성율은 접합에서 더 많이 발생되므로 이를 고려하여 화산 깊이를 측정하였다. 이렇게 측정한 결과와 이후에 소자를 lapping 하여 파괴 측정한 측정치와 비교 한 결과 일치함을 알 수 있었다.

• Advances in concrete construction
• /
• 제14권2호
• /
• pp.79-92
• /
• 2022

The amount and configuration of transverse reinforcement are known as critical parameters that significantly affect the lateral confinement of concrete, the ductility capacity, and the plastic hinge length of RC columns. Based on test results, this study investigated the effect of the three variables on structural indexes such as neutral axis depth, lateral expansion of concrete, and ductility capacity. Five reinforced concrete column specimens were tested under cyclic flexure and shear while simultaneously subjected to a constant axial load. The columns were reinforced by two types of reinforcing steel: rectangular hoops and spiral type reinforcing bars. The variables in the test program were the shape, diameter, and yield strength of transverse reinforcement. The interactive influence of the amount of transverse reinforcement on the structural indexes was evaluated. Test results showed that when amounts of transverse reinforcement were similar, and yield strength of transverse reinforcement was 600 MPa or less, the neutral axis depth of a column with spiral type reinforcing bars was reduced by 28% compared with that of a column reinforced by existing rectangular hoops at peak strength. While the diagonal elements of spiral-type reinforcing bars significantly contributed to the lateral confinement of concrete, the strain of diagonal elements decreased with increases of their yield strength. It was confirmed that shapes of transverse reinforcement significantly affected the lateral confinement of concrete adjacent to plastic hinges. Transverse reinforcement with a yield strength exceeding 600 MPa, however, increased the neutral axis depth of normal-strength concrete columns at peak strength, resulting in reductions in ductility and energy dissipation capacity.

• 한국해양환경ㆍ에너지학회지
• /
• 제6권4호
• /
• pp.52-66
• /
• 2003

본 연구에서는 물리, 기계적인 누유 제거방법으로서 부착식의 일종인 드럼식 유회수기를 사용하여 회수조건의 변화에 따른 유회수율을 실험적으로 구하였다. 일반적으로 기계적인 유회수방법에서 문제시되는 것은 고점도 유체에서 유회수가 어렵고, 얇은 유막층에서 회수유중물의 함량이 증가하며, 유회수율이 크게 감소되는 점이다 본 연구에서는 드럼식 유회수기를 이용하여 드럼의 잠긴 깊이에 따른 접촉각, 이송속도, 유막두께 등의 유회수 조건이 유회수율에 미치는 영향을 디젤유를 사용하여 구하고 이를 분석하여 효과적인 유회수 조건을 구하였다. 실험결과 드럼식 유회수기에서 유회수율은 부착유량과 부착유량의 이탈손실에 의하여 영향을 받으며, 부착유량은 잠긴 깊이에 의한 접촉각에 영향을 받는다. 드럼식 유회수기에서의 유회수율은 드럼의 지름에 대한 잠긴 깊이의 비 h/d=0.15(접촉각 45°)에서 가장 효가적인 유회수율을 보이며, 얇은 유막두께에서도 비교적 효과적인 유회수율과 회수효율을 보였다. 또한 이송속도는 최대양정유량을 보이는 임계이송속도를 갖으며, 임계이송속도는 유막두께의 증가에 따라 증가한다.