• Nuclear Engineering and Technology
• /
• v.51 no.5
• /
• pp.1289-1296
• /
• 2019

Non-functional requirements plays a critical role in designing variety of applications domain ranges from safety-critical systems to simple gaming applications. Performance is one of the crucial non-functional requirement, especially in control and safety systems, that validates the design. System risk can be quantified as a product of probability of system failure and severity of its impact. In this paper, we devise a technique to do the performance analysis of safety critical and control systems and to estimate performance based risk factor. The technique elaborates Petri nets to estimate performability to ensure system dependability requirements. We illustrate the technique on a case study of Nuclear Power Plant system. The technique has been validated on 17 safety critical and control systems of Nuclear Power Plant.

• The Journal of Fisheries Business Administration
• /
• v.38 no.2
• /
• pp.25-40
• /
• 2007

Recently, fisheries safety has been a matter of primary concern among consumers and suppliers. This phenomenon made them require the introduction of fisheries traceability systems. For traceability systems to be effective, automatic identification means play an important role. Therefore, RFID-based fisheries traceability systems are more required than barcode-based fisheries traceability systems. Unlikely EU and Japan, Korea did not accept mandatory traceability regulations. But Many countries began to accept mandatory traceability regulations to diminish food risks. So Korea is expected to adopt them in the near future. The purpose of this study is to find what benefits are generated from the adoption of RFID-based fisheries traceability systems and are related to their success. To do these, this study investigated primary benefits of RFID-based fisheries traceability systems from the perspectives of consumers and suppliers. Consumers' benefits were derived from the perceived risk dimensions. And suppliers' benefits were derived from operational benefits of RFID systems. To purify the benefits from RFID-based fisheries traceability systems, reliability and factor analysis were used. And the refined benefits of RFID-based fisheries traceability systems were additionally analyzed to find which benefits were significantly related to fisheries traceability systems' success. According to the analysis results, all risk dimensions except social risk were significantly related to their success. But in the benefits of suppliers, only "recalls and counterfeits" factor was significantly related to their success. These results implied that fisheries traceability systems should be based RFID technology instead of barcode and fisheries traceability systems were related to almost food risk dimensions. It's because these significant factors are related all food risks except social risk and the benefits of suppliers can be derived from only RFID technology.

• Journal of Korean Critical Care Nursing
• /
• v.12 no.1
• /
• pp.94-108
• /
• 2019

Purpose : Heart failure (HF) is considered an important medical burden with rehospitalization and mortality. Anemia is a major risk factor associated with the severity of HF. To improve the understanding of the impact of anemia in the population with HF, we explored the prevalence of anemia, its guidelines, relationship between anemia and mortality or rehospitalization, and limitation of reviewed papers of various populations with HF. Method: We used Whittemore and Knafl's integrative review methodology (2005), and thirty research papers were analyzed. PubMed, CINAHL, Cochrane, PsychInfo, Embase, Web of Science were searched for papers published between January 1960-June 2018. Results: Anemia in individuals with HF was primarily defined using the World Health Organization guideline. The prevalence of anemia in patients with HF varied from 9% to 56.7%. Moreover, such a condition significantly increases the prevalence of mortality or rehospitalization in patients with HF. The analyzed majority were non-prospective cohort study including secondary data analysis. Conclusion: Anemia in individuals with HF is a significant risk factor of mortality and rehospitalization. Prospective cohort studies should be designed to identify the optimal value for screening anemia and the impact of anemia on rehospitalization and mortality among HF patients.

• The Journal of Information Systems
• /
• v.19 no.1
• /
• pp.97-116
• /
• 2010

Failures of super large projects like IT Upgrade of Shinhan Financial Group can be a heavy blow not only to the company but even to the national economy. Research on the practices of risk management in those projects will provide invaluable lessons, enhancing capabilities and chances of successfully executing mission critical projects of the companies and the national economy as a whole. This paper analyzes the risk management of the Core Systems Reconstruction which was the most critical component of IT Upgrade. The analysis covers risk management plans, and identification and evolution, and control and monitoring of risk factors. This study confirms the major results of previous research on risk management in Korea. However, the analysis found as well some discrepancies of practices from the previous research results. This research also tracked the trajectories of evolution of risk factors and management. In particular, in depth analysis of control and monitoring is the first research in Korea on the "management" of risks in IT projects. The result of this research is expected to be a useful guide for theory development and practices of risk management in the future.

• Korean Journal of Construction Engineering and Management
• /
• v.17 no.4
• /
• pp.76-86
• /
• 2016

Recently, the Contracts of International Construction Business has been decreased from the beginning of 2015 in Korea, although it has been steadily increased until 2014. This trend could be caused by Low-Price Contracts, the lack of Know-how and experience in operating, the poor management of Claims and Low-Profitability in Business. It has been recognized that the qualitative improvement of Business Contacts are necessary for successful Projects. In the Bidding Process, therefore, Experience data as In-House Data and Lessons Learned for projects should be strategically involved to assure riskless offers. Accordingly the Proposal Process are needed to be organized and enhanced by including processes for risks review about technical, marketing and commercial part during the bidding. This paper proposes a Risk Management Process model during Bidding Phase, using Risk Evaluation Method through the project life-cycle. The Concept of Model is to define CSF (Critical Success Factor) in the bidding process and Risk Factors are linked to CSF and Organization based on RAM (Responsibility assignment matrix).

• Geomechanics and Engineering
• /
• v.27 no.6
• /
• pp.605-614
• /
• 2021

Water inrush from fault is one of the most severe hazards during tunnel excavation. However, the traditional evaluation methods are deficient in both quantitative evaluation and uncertainty handling. In this paper, a comprehensive methodology method combined intuitionistic fuzzy AHP with a Bayesian network for the risk assessment of water inrush from fault in the subsea tunnel was proposed. Through the intuitionistic fuzzy analytic hierarchy process to replace the traditional expert scoring method to determine the prior probability of the node in the Bayesian network. After the field data is normalized, it is classified according to the data range. Then, using obtained results into the Bayesian network, conduct a risk assessment with field data which have processed of water inrush disaster on the tunnel. Simultaneously, a sensitivity analysis technique was utilized to investigate each factor's contribution rate to determine the most critical factor affecting tunnel water inrush risk. Taking Qingdao Kiaochow Bay Tunnel as an example, by predictive analysis of fifteen fault zones, thirteen of them are consistent with the actual situation which shows that the IFAHP-Bayesian Network method is feasible and applicable. Through sensitivity analysis, it is shown that the Fissure development and Apparent resistivity are more critical comparing than other factor especially the Permeability coefficient and Fault dip. The method can provide planners and engineers with adequate decision-making support, which is vital to prevent and control tunnel water inrush.

• Korean Journal of Construction Engineering and Management
• /
• v.14 no.4
• /
• pp.73-83
• /
• 2013

Recently, not only around Korea but also other countries shows a pattern of arising high-rise building construction project which was delayed or aborted during global economic crises and recession. Although the market starts to stretch, It is getting competitive to win a contract in high-rise construction project between contractors due to lack of competitive advantage especially to Korea contractors. To get that, Korean contractors needs lifting equipment plan. But currently, they depend on the empirical methods and that cause schedule delay, not controlled cost management problem. Therefore, this research is to improve the accuracy of Lifting plan by analyzing the current issues of Lifting plan system and deducing the types of failures with planning factors, as well as analyzing the impact on schedule and cost control and safety management by each failure mode. Also, by analyzing detail risk factors per Lifting Equipment with FMEA, to infer the critical risk factor on high-rise construction project.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.54 no.6
• /
• pp.121-131
• /
• 2012

Many of the falling which is the number one risk factor in lethal accidents in construction could have been prevented if the right activity or supervising had been taken in time. All other measures do not preventive the fall, but rather intercept the fallen itself or preventive severe injury. The most common and the bets measures on the preventive measures are guardrails which are to be worn on the site. Workers always exposed the risk of serious accidents induced by causal effects related with environments around construction sites. In order to represent how to decrease the risk of workers, this study was accomplished with a number of interview with experienced site director, cheief of instructors, workers. And the questionaire survey (2012. 5~2012. 10) were used to make proposed policies which are expected to reduce critical disastrous accidents and strength authorized limits of director's management automatically.

• Korean Journal of Construction Engineering and Management
• /
• v.13 no.5
• /
• pp.12-24
• /
• 2012

The Risks in undertaking a construction project comes from many sources and often involves many participants in the project. This study has identified various kinds of risks, assessed the risk factors quantitatively and suggested risk management method for response pertinent in Design Build(Turn Key)type of projects in Korean context. A questionnaire was designed comprising of 145 possible risks in all types of construction projects. The population from owner, consultant and contractor groups was asked to indicate the risks applicable in DB projects. 25 numbers of critical risks in DB projects were identified and further analyzed for reveling inherent relationship between them through factor analysis. Factor analysis revealed 8 risk factors in DB projects. Construction site related, contract related and design related risk factor consisted about 72% of total risk weight. It has been found out about 6%, while considering the mutual dependency, it is about 10% of total cost of DB project. Therefore, It is suggested that 6% to 10% of construction amount as contingency has to be made provision for risk responses in the DB projects.

• Journal of the Korean Home Economics Association
• /
• v.43 no.2
• /
• pp.19-31
• /
• 2005

The purpose of this study was to evaluate the microbiological quality and assure the hygienic safety of the Bibimbap production in elementary school foodservice in accordance with the HACCP(Hazzard Analysis Critical Control Point) program. The time-temperature relationship and the microbiological quality(total plate count and coliform bacteria count) were assessed to find the critical control point(CCP) during each of the production phase. In the pre-preparation phase, the risk factors of the raw ingredients exceeded the standard level suggested by Solberg et al. Mungbean starch jelly, egg and Kochujang were satisfactory in that no coliform groups were observed over the standard TPC level. In particular, there was a high the risk of beef from the early stages in terms of the coliform level. In the pre-preparation phase, green pumpkin had more coliform groups than the standard level even after washed, which calls for special attention to washing, sterilization, secondary infection of the handler, and the required time for pre-preparation of raw vegetables. In the cooking phase, the temperature of the soybean sprout and mungbean starch jelly decreased to 42$^{\circ}C$ and 26$^{\circ}C$, respectively, which was within the risk zone. In particular, mungbean starch jelly had a great risk factor even after boiling in hot water. During the storage stage before serving, a lot of ingredients were exposed to poor management of temperature and time and thus exceeded the standard level in the total plate counts. In particular, the microbiological count of beef was five times the standard level. Green pumpkins and soybean sprouts were left at 15-38$^{\circ}C$ that is within the risk zone for a long period of time after they were cooked. It is highly recommended that the time of the storage stage before consumption should be shortened and that proper devices should be used to prevent proliferation of bacteria. The number of TPC of the utensils was satisfactory enough, but the knife used exceeded the standard level and thus was a risk factor of bacteria proliferation.