• 논리연구
• /
• 제13권2호
• /
• pp.1-26
• /
• 2010

이 글은 고 김영정 교수의 비판적 사고 이론을 비판적으로 검토하는 것이 목적이다. 그는 비판적 사고의 기본 속성은 능동적 반성성이고, 비판적 사고가 지향하는 주요 특성은 심층성, 다각성, 영역 전이성이라고 정의한다. 그리고 그는 비판적 사고 개념이 창의성 개념과 연결될 수 있는 가능성을 모색하여, 비판-창의적 사고라는 개념을 제시한다. 나는 이런 정의의 한계를 지적하면서도, 비판-창의적 사고를 향상시킬 방법이 가능하다고 주장하겠다.

• 전기학회논문지
• /
• 제57권11호
• /
• pp.1970-1975
• /
• 2008

Critical current of the superconducting machines is limited by the magnetic field. When the magnetic field is not uniform, it is difficult to estimate the magnetic field and the critical current. This paper proposed a method for the estimation of the magnetic field and the critical current of the HTS pancake windings which can be used to generate the high field magnet. A parameter which was needed to calculate the critical current of a BSCCO magnet with 10 pancake windings was obtained by the experiment. Test which was carried out by using single pancake winding and magnet consisting of 10 pancake windings shows the proposed method can be an effective method for the estimation of the critical current of pancake windings.

• 대한수학회지
• /
• 제51권1호
• /
• pp.55-65
• /
• 2014

A graph G is called a fractional (g, f, n)-critical graph if any n vertices are removed from G, then the resulting graph admits a fractional (g, f)-factor. In this paper, we determine the new toughness condition for fractional (g, f, n)-critical graphs. It is proved that G is fractional (g, f, n)-critical if $t(G){\geq}\frac{b^2-1+bn}{a}$. This bound is sharp in some sense. Furthermore, the best toughness condition for fractional (a, b, n)-critical graphs is given.

• 전기학회논문지
• /
• 제58권3호
• /
• pp.502-508
• /
• 2009

The method to determine the operating current of HTS magnets needs to be different from that of LTS magnets. This paper presented estimation of the critical current of pancake windings. The pancake windings can be excited by a single power source or by multiple power sources. Critical currents were determined by using field dependent E-J relation. For the better estimation of the critical current, a new method to define the magnetic field of the HTS wire has been proposed. Calculated critical currents of pancake windings were compared with measured ones of the HTS BSCCO magnet consisting of 10 pancake windings. According to the test results, the estimated critical currents of pancake windings agreed well with that of measured ones. Effects of the single and multiple power source excitation on the critical currents have been also examined.

• 한국의료질향상학회지
• /
• 제9권1호
• /
• pp.66-73
• /
• 2002

The current health care system demands provisions for patient care in perspectives of a cost-effectiveness and patient satisfaction. Critical pathway implementation facilitates optimal sequencing and intervention timing of patient care, and makes medical team and patients participate in a treatment actively. In this study, a critical pathway was developed and implemented to patients with osmidrosis who undertake operation. Sixty patients were included in the study. The critical pathway was implemented for care of 26 patients while the traditional care was implemented for 34 patients. In the critical pathway implemented group, time needed for charting and unessential working was reduced. Mean time amount of time for patient nursing was increased. The critical pathway implementation is an effective method to utilize time of medical team. Also it increases the satisfaction index of patients and medical team simultaneously.

• 대한간호학회지
• /
• 제26권1호
• /
• pp.43-52
• /
• 1996

This descriptive study was done to investigate the critical thinking ability of senior nursing students in two types of nursing education programs : associate and baccalaureate programs. Data were conveniently collected from 159 associate degree nursing (ADN)students and 158 baccalaureate degree nursing(BSN)students. All schools were the Ministry of Education accredited and located in Seoul City and Kyung gi Province. These data were collected by self reporting questionaire given over two months from March to May, 1995. The subjects completed the Watson-Glaser Critical Thinking Appraisal (WGCTA) and a demographic questionnaire. The data was analyzed using descriptive statistics and t-test with the SAS program. The results of this study are as follows 1. The mean of critical thinking ability of the ADN students was 42.69. 2. The mean of critical thinking ability of the BSN students was 47.68. 3. There was significant difference in the WGCTA scores between the ADN and the BSN students （t=7.38 p＜0.001） 4. This study suggests that critical thinking ability may increase with higher levels of nursing education. Possible explanations for these findings are discussed.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.571-576
• /
• 2010

In this study, an application method of critical strains concept for tunnels' safety by using the values of measured displacements which are obtained in the field is discussed. The aim is to: (1) study on the engineering meanings of critical strains concept by reviewing the previous researches and application examples with measured displacement values; (2) study on the engineering reasonability of critical strains concept with the view point of a tunnel engineering and a geotechnical engineering; (3) study on the features of ground deformation due to tunneling and reciprocal relation between total displacement and measured displacement; (4) evaluate a tunnel safety by using domestic measurements collected in the field; and (5) re-evaluate the control criteria which were previously used in the field, with the view point of critical strains concept. Consequently, it was confirmed that critical strains in the ground has a reasonability and a possibility of unified or common concept with the view point of a tunnel engineering.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.2127-2132
• /
• 2003

A computational study is performed to better understand the choke phenomenon of unsteady gas flow through a critical nozzle. The axisymmetric, unsteady, compressible, Navier-Stokes equations are solved using a finite volume method. In order to simulate the effects of back pressure fluctuations on the critical nozzle flow, a forced sinusoidal pressure wave is assumed downstream the exit of the critical nozzle. It's frequency is 20kHz and amplitude is varied below 15% of time-mean back pressure. The results obtained show that for low Reynolds numbers, the unsteady effects of the pressure fluctuations can propagate upstream of the throat of critical nozzle, and thereby giving rise to applicable fluctuations of mass flow through the critical nozzle. The effect of the amplitude of the excited pressure fluctuations on the choke phenomenon is discussed in details.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.411-414
• /
• 2002

The CHFG(Critical Heat Flux in Cap) test results have been evaluated to quantify the critical powers in hemispherical narrow gaps and Park's correlation has been verified. For verification of the Park's correlation, the critical powers in hemispherical narrow gaps have been measured using water at a pressure of 0.1-0.3 WPa for the hemispherical gap thickness of 1.0mm, and the heated top diameter of 238mm The measured critical powers were compared with Park's and Monde's correlation. As a results, the Park's correlation was most accurate of other correlations, however, estimated the critical powers somewhat larger than measured ones. So, it was suggested that the diameter factor in Park's correlation should be revised.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.611-614
• /
• 2002

Rotating stall in vaneless diffusers of centrifugal compressor occurs in the diffuser wall due to flow separation at large inlet flow angle. For this reason, the critical inlet flow angles are suggested by several researchers. Beyond this critical angle, flow separates in the diffuser, and develops into rotating stall. This paper studied this critical flow angle. Rotating stall is measured through eight fast-response pressure transducers which are equally spaced around the circumference at the inlet and exit of a vaneless diffuser. Experiments are done from 20000rpm to 60000rpm for the diffuser stall. Two-cell structure which rotates at $6{\~}l0{\%}$ of impeller speed is fully developed at $20000{\~}40000rpm$, and three-cell structure which rotates at $7{\~}9{\%}$ of impeller speed is fully developed at $50000{\~}60000rpm$. This paper shows that the critical inlet flow angle is not constant but related with tip speed of impeller. As tip speed increases, so does the critical inlet flow angle.