• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.28 no.1
• /
• pp.1-8
• /
• 2018

The 23 wt% polyvinylidene fluoride (PVDF)/15 wt% polyurethane (PU) fibers were electrospun using the conjugated nozzle at a flow rate of 1.0 mL/h and an electric field of 1 kV/cm. The formation of ${\beta}$ crystal phase in the PVDF and the PVDF/PU fibers was confirmed by Fourier transform infrared spectroscopy. After electrospinning, the asspun fibers were immersed in a boiling water and then dried at $100^{\circ}C$ in a convection oven to make a crimp phenomenon. The crimps with a diameter of $2.0{\pm}0.08{\mu}m$ were observed for the PVDF/PU fibers after hydrothermal treatment without sacrificing the extent of ${\beta}$ crystal phase. All the PU, PVDF and PVDF/PU fibers exhibited average cell viability of more than 98 %. The cell proliferation results suggested that L-929 cells adhered well to the PU, PVDF and PVDF/PU fibers and proliferated continuously with increasing time, indicating that the PVDF/PU fibers are highly applicable to the biomedical applications.

• Fashion & Textile Research Journal
• /
• v.7 no.5
• /
• pp.553-559
• /
• 2005

Hand characteristics related with structural properties of fabrics have something to do with mechanical properties of fabric. In this study, the mechanical properties and hand characteristics have been analyzed according to fabric structural parameters such as the weave structure and the linear density of weft of cotton fabric. Mechanical properties have been used by KES-FB system which measures hand characteristics and mechanical properties of fabric. Linear density of weft, tensile, bending, and shear properties are decreasing with increasing weft linear density, and there is no considerable effects on compression and surface properties. In case of formability with weft linear density, B/W, 2HG/G, 2HB/B, 2HB/W, $\sqrt[3]{B/W}$, $\sqrt{2HB/W}$, W/T except MMD/SMD, WC/T, and WC/W have been effected. There is a high correlation between the crimp, tightness, hand, formability and mechanical properties specially tensile linearity, bending, shear, and compression properties. The weft crimp influences the bending rigidity, shear properties, and the tightness which have effects on the tensile linearity, bending, shear, compression properties, hand, and formability.

• Proceedings of the Korean Fiber Society Conference
• /
• 2002.04a
• /
• pp.63-68
• /
• 2002

크림프를 가지는 섬유 캔틸레버의 대변형을 해석함에 있어서 크림프를 반원모양의 교대 접합으로, 섬유를 선형 탄성 보로 간주하여 해를 구하였고 구하여진 해를 단순화하여 기존의 1원소 선형 보의 변형[1], 1원소 선형 보의 끝단 회전 하중시의 변형[2], 1원소 원형 굽힘보의 변형[3]의 결과와 비교함으로써 해의 정확성을 확인하였고 본 연구의 일반해의 가장 단순한 경우인 2원소 원형 굽힘보의 처짐의 해를 구하였다. (중략)

• Proceedings of the Korean Fiber Society Conference
• /
• 1998.10a
• /
• pp.373-376
• /
• 1998

직물에 있어서 경ㆍ위사의 밀도, crimp, cover factor, 직물의 두께, 무게 둥은 경ㆍ위사의 섬도, 직물의 패턴 등과 더불어 직물의 특성을 나타내는 기본적인 인자들이며 이러한 직물 구성 인자간의 관계에 대하여 Peirce의 연구[1] 이래 많은 연구가 이루어져 왔다. 그러나 이러한 인자들을 실제로 측정하기 위해서는 직물을 자르거나 분해하여야 하며, 측정에 많은 시간이 소요되고, 측정 방법이나 기기 또는 측정자에 따라 측정치에 차이가 나는 등의 단점이 있다. (중략)

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2009.11a
• /
• pp.143-144
• /
• 2009

This is studies about development of natural stretch Cotton-like fabric of using PET yarns. The natural stretch Cotton-like yarn is a complex yarn combining PET spiral crimp yarn and PET POY yarn using air texturing technology. The complex yarn is natural stretch function and cotton-like effect itself by technology of air texturing process.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.21 no.7
• /
• pp.1117-1123
• /
• 1997

This paper describes the measurement of thickness of still air layer above fabrics and its relationship to structural properties of fabrics. Rayon fabrics - of both filament and spun - and wool nylon blended fabrics varied in terms of surface hairiness were used. Temperature and relative humidity above fabrics were measured at the various distances from the fabric surface. Increase in the thickness of fabric, fabric weight, yarn count, and crimp resulted increase in thickness of still air layer above fabric. Surface hairiness of fabrics as well as the structural properties were found to be related with the thickness of still air layer above fabrics.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.92-92
• /
• 2012

나노필라멘트 섬유는 직편물 등으로 구조/용도 다양화 가능하다. 나노필라멘트 섬유는 소재특유의 닦음성, 흡착성, 고밀도 특성 등을 활용하여 직편물의 형태로 다양한 용도 개발이 가능하며, 나노기술을 접목시킨 새로운 기능성과 고성능 섬유 소재 개발을 통한 자동차 분야의 개발 트랜드인 고급화, 경량화, 고성능화 추진을 위해 연료전지, 신슐레이터, 고성능 필터, 시트나 도어트림, 헤드라인과 같은 인테리어류와 전자 분야의 제조원가 절감, 공정 단순화를 위해 프린터 토너, 하드디스크 연마제, 다용도 No Dust Cleaner 등의 개발, 의료/바이오 분야의 혈액필터, 수술용 보호제, 창상억제제(유착 방지막), 항균마스크, 의료용 약물전달 시스템 및 환경 분야의 정수/공기 정화 시스템, 건축 토목용 보강제, 고(高)인성 콘크리트, 폐수처리용 슬러리 담체(Matrix) 등 다양한 분야로 용도 개발이 가능하다. 본 연구는 나노필라멘트의 다양한 분야로의 용도 개발 적용의 기초연구로서, 부직포 상으로 얻어지는 나노섬유 제조기술의 단점인 직경의 불균일, 물리적 특성의 한계와 필라멘트가 아닌 단섬유로 인해 발생하는 용도 및 상품 개발에의 제한성을 개선하기 위하여 연속적으로 필라멘트를 생산가능한 해도형 복합방사 방법을 도입하여 개발한 장섬유 필라멘트 형태의 해도형 나노 섬유 소재를 활용하는 것으로 방사된 SDY 형태의 나노필라멘트 섬유를 제직상에서의 작업성 용이 및 직물의 벌키성 증대와 Crimp성을 향상 시켜 터치감 및 후가공에 용이할 수 있도록 DTY를 제조함에 있어 기존 일반 POY사에서의 DTY공정과는 달리 소재의 특성 즉, 해도사의 해성분 및 도성분의 후공정을 감안하여 최적의 Crimp는 발현하되 단면의 형상을 유지할 수 있는 다양한 사가공 조건을 설정 하고 이에 따라 가공사를 생산하여 공정조건에 따른 가공사의 물성 및 수축특성을 비교 분석 하여 염색 및 후가공시 소재의 물성 및 수축특성이 미치는 영향성을 살펴보고자 하였다.

• Transactions of Materials Processing
• /
• v.29 no.3
• /
• pp.157-162
• /
• 2020

Blind rivet nuts are increasingly used in automotive for the joining of sheets. Their application, however, requires appropriate design guides to prevent catastrophic events arising from the failure of joints. In this study, the shaft shape of a frequently used M8 blind rivet nut is optimized based on 3D numerical analysis of the blind rivet nut considering the characteristics of thread. The thread needs to be modeled to suitably consider the fastening of the M8 bolt after the crimping process. FE analysis showed that while the friction in the contact between crimp flange and plate has no significant effect on the crimp geometry, shaft thickness (t) and shaft height (h) are the most significant design variables. The parameter study including various combinations of t and h reveals that they affect the gap (the distance between the crimped flange and the plate that develops through riveting) and the load acting on the plate. The gap is an indicator of the tightening force. It is found that t is inversely proportional to the gap, and proportional to the load, whereas h is proportional to the gap and inversely proportional to the load. Based on our FE analysis results, we propose the range 0.062 < t/h < 0.1 to ensure sufficient fastening (high clamping load, small gap) of the M8 blind rivet nut. The design guide for determining the t/h ratio proposed in this study can be used for general quantitative analysis of the size and the t/h ratio of blind rivet nuts.

• Composites Research
• /
• v.17 no.6
• /
• pp.28-36
• /
• 2004

Micro-tow deformation during forming of PVC foam-fabric composite sandwich structure is investigated to find out the correlation between forming condition and material deformation. The foams used in this research are PVC foams which have 4 different densities and the fabric composite is Carbon/epoxy prepreg which is plain weave (3k) as a skin material. Tow parameters such as crimp angle and tow amplitude are measured using microscope and a proper image tool and are compared with each other. In order to find out the effect of foam deformation during forming on tow deformation the compressive tests of foams are performed in three different environmental temperatures ($25^{\circ}C$, $80{\circ}C$, $125^{\circ}C$). The microscopic observation results show that the micro tow deformations are quite different from each other with respect to the foam density and forming pressure.

• Composites Research
• /
• v.31 no.5
• /
• pp.276-281
• /
• 2018

In this paper, elastic behavior of woven fabric composites with various fiber yarn structure were predicted through a theoretical calculation model. A representative volume elements (RVE) that can represent the mechanical properties of the woven composites were selected and crimp angle of the weave yarn was defined by several sinusoidal functions. The effective material properties of the woven composite such as young's modulus, shear modulus and poisson's ratio was predicted by classical laminate theory (CLT). The fiber volume fractions were calculated according to the shape and pattern (plain, twill weave) of the fiber yarn, and the elastic behavior of each woven composite was obtained through a theoretical calculation model. Also, to verify the theoretical predictions, woven composite specimens of plain and twill weave were fabricated by vacuum assisted resin transfer molding (VARTM) process and then mechanical test was conducted. As a results, a good correlation between theoretical and experimental results for the elastic behavior of woven composites could be achieved.