• Steel and Composite Structures
• /
• v.46 no.4
• /
• pp.577-589
• /
• 2023

In this study, on-site testing was carried out to investigate the vibration performance of a cold-formed thin-walled steel floor system. Ambient vibration, walking excitation (single and double persons), and impulsive excitation (heel-drop and jumping) were considered to capture the primary vibration parameters (natural frequencies, damping ratios, and mode shapes) and vertical acceleration response. Meanwhile, to discuss the influence of cement fiberboard on structural vibration, the primary vibration parameters were compared between the systems with and without the installation of cement fiberboard. Based on the experimental analysis, the cold-formed thin-walled steel floor possesses high frequency (> 10 Hz) and damping (> 2%); the installed cement fiberboard mainly increases the mass of floor system without effectively increasing the floor stiffness and may reduce the effects of primary vibration parameters on acceleration response; and the human-structure interaction should be considered when analyzing the vibration serviceability. The comparison of the experimental results with those in the AISC Design Guide indicates that the cold-formed thin-walled steel floor exhibits acceptable vibration serviceability. A crest factor 𝛽_rp (ratio of peak to root-mean-square accelerations) is proposed to determine the root-mean-square acceleration for convenience.

• Korean Journal of Agricultural Science
• /
• v.49 no.4
• /
• pp.707-717
• /
• 2022

As the variability of recent rainfall is increasing, it is becoming important to recognize the possibility of changes in the current reservoir state in advance and to inspect the stability based on accurate evaluation standards. However, the evaluation standards for the state change factors of reservoirs are still not suitable for agricultural reservoirs and thus much improvement is needed. Therefore, in this study, the evaluation criteria for state change factors specialized for small reservoirs were categorized and standards were prepared by considering factors that may cause state changes on the dam crest, upstream slope, and downstream slope of the embankment. The categorized results were configured based on the number of mentions of the precision safety inspection report on major defects in 102 reservoirs and the defect factors found in field investigations. The findings of the study indicated that the current state change standards require many revisions for excessive or unnecessary state change factors in the reservoir. Specifically, the deletion of measurement gauges not applicable to the reservoir, the addition of defects found in the reservoir, and the scope of use of the term were proposed. The results of this study can contribute to efficient system operation and management by improving the deficiencies in the system and introducing a new state change factor.

• The korean journal of orthodontics
• /
• v.24 no.3 s.46
• /
• pp.673-693
• /
• 1994

Most adults, unlike growing children, have some periodontal problems which can influence the outcome of the orthodontic treatment. In cases where periodontal disease progression resulted in marked reduction of periodontium, orthodontic treatment could result in the worsening of the periodontal conditions, and therefore orthodontic treatment planning in such adult patients requires special considerations for the periodontal problems. This study investigates the effects of horizontal orthodontic tooth movement on the changes in the mesial, distal and furcation areas of the disease affected periodontium of adult dogs with advanced bone loss. Six adult dogs with healthy periodontium were selected, and mandibular 2nd premolars were extracted. In the mandibular 3rd premolars, angular bony defects in the mesial and distal sides, and horizontal bony defects in the furcation areas were created. Those that received the flap operation and plaque control were designated as the control, those that had horizontal tooth movement without plaque control after the flap operation as Experimental group I, those that had horizontal tooth movement under plaque control without the flap operation as Experimental group II, and those that had horizontal tooth movement under plaque control after the flap operation as Experimental group III. The control group was sacrificed 2 months postoperatively, and the experimental groups were sacrificed 5 months after the initiation of tooth movement. Specimens were histologically analyzed under light microscope. The results were as follows; 1. After the horizontal tooth movements, Experimental group I and II showed angular bony defects in the mesial sides of the roots and the distal side of the furcation areas, which correspond to the pressure sides. 2. After the horizontal tooth movements, Experimental group I and II showed decreased level of alveolar bone crest in the distal sides of the roots, which correspond to the tension sides. 3. Long junctional epithelium in the control group has not been replaced by periodontal connective tissue after the horizontal tooth movements. 4. Limited formation of new bone was observed in the angular bony defects in the mesial and distal aspects of the roots in the control group. 5. Inflammatory cell infiltration in the connective tissue was most severe in the Experimental group I, followed by Experimental group II, III, and the control group in that order. These results seem to indicate that plaque control was the most influencing factor in the alteration of the periodontal tissue after the horizontal tooth movements in the periodontal tissue with alveolar bone defects.

• The Journal of Korean Academy of Prosthodontics
• /
• v.36 no.3
• /
• pp.468-482
• /
• 1998

Since the concept of osseointegration was introduced by Branemark of Sweden, dental implants have been used for various dental prosthetic treatments. The survival rate of dental implant is likely to be closely related to the total biomechanical role of each component of implant system. The use of interchangeable component is very attractive for dental practitioners because such an approach would save treatment cost, flexibility of prosthetic treatment options as well as conveniences. Therefore, the use of interchangeable implant system has been increasing without scientific assessment of safety and efficacy of various interchangeable implant system. The purpose of this study, therefore, were to compare the geometric characteristic of four interchangeable dental implant screws and the loosening torque of these screws. Four types of dental implant screws tested in this study were Nobelpharma, 3i, Impla-med, Restore. Four screws each of the test specimens were subjected for scanning electron microscopic examinations under the same condition and a 35x magnified standard SEM picture was objected from each test specimen using JSM-5200 scanning microscope. From each of the SEM pictures, eight parameters. i.e., diameter of screw head. screw length, thread pitch, major diameter. neck diameter, neck length, crest width and root width were determined using a caliper. The measurement for each parameters were then corrected for their magnification factor. The loosening torque were also determined by using a torque gauge. All of the measurements were statistically analyzed by ANOVA test and multiple range test. Statistical significance was set in advance at the probability level of less than 0.05. All analyses were done with SPSS software for the personal computer. The conclusion obtained from this studies were summarized as the following; 1. No statistically significances were noted in the thread pitch. and crest width in the four screws, and in the case of major diameter, the Impla-med screw was significantly smaller than the other three screws (p<0.05). Therefore, four implant bolts could be physically inserted in a abutment nuts. 2. The diameter of screw head was decreased in the order of Restore, 3i, Nobelpharma, Impla-med screws and the length of screws were decreased in the order of 3i, Restore, Nobelpharma and Impla-med. The diameter of neck was decreased in the order of Impla-med, Restore. Nobelpharma, 3i screws. The differences of each of these parameters were statistically significant (p<0.05). The width of root of screws were decreased in the order of Nobelpharma, Impla-med, Restore and 3i. The differences among Nobelpharma and Impla-med. Restore and 3i were statistically significant (p<0.05). 3. When the screws were loosening 1, 3, 4 and 5 times, the loosening torque for Impla-med and 3i screws were significantly higher than that of Nobelpharma or Restore screws (p<0.05). However, when statistically smaller than that of 3i, Restore or Nobelpharma screws(p<0.05).

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.14 no.2
• /
• pp.1-15
• /
• 2008

Purpose : This survey was to investigate on the effect of each region changed in trunk through sagittal plane after Trunk Flexion-Extension Exercise. Methods : 18 students of Gimcheon College participated in this study for the period of July 9-30, 2007. Analyzed factor were 1) degree of pain 2) presence of Gillet test and 3) difference of right-left for 7 landmark region in trunk applying I.B.S.-2000 after Trunk Flexion - Extension Exercise. We used the SPSS $PC^+$ program for classifying into analysis of frequency, $x^2$-test, t-test and Simple Linear Regression analysis test. Results: Followings are concluded For degree of pain, 13(72.2%) of students answered "No pain" after Trunk Flexion-Extension Exercise and in the result 4 more students decreased the pain. In the Gillet test, 14(77.8%) of students answered "positive" after Trunk Flexion-Extension Exercise and in the result 4 more students increased mobility of Sacroiliac joint. In the differences of right-left for 7 landmark region in trunk by B.M.I. scale, Slim type was decreased both Acromion(0.45mm), both Iliac crest(0.44mm), and both ASIS(0.31mm) to anterior plane, Normal type was decreased both inferior angle of Scapular(0.02mm), both L4-5(0.07mm), and both PSIS(0.09mm) to posterior plane Fatness type was decrease both Acromion(0.05mm), both ASIS(0.05mm) to anterior plane. In the differences of right-left for 7 landmark region in trunk for degree of pain No pain group was decreased both Acromion(0.17mm), both Nipple(0.25mm) to anterior plane and both PSIS(0.13mm) to posterior plane Pain group was decreased both Acromion(0.04mm), both Iliac creast(0.03mm) to anterior plane and both inferior angle of Scapular(0.18mm) both PSIS(0.13mm) to posterior plane. In the difference of right-left for 7 landmark region in trunk for each of the exercises, Both iliac crest(0.1mm), both ASIS(0.12mm) to anterior plane were decreased after Flexion Trunk Exercise. Both acromion(0.27mm) to anterior plane, both inferior angle of scapular(0.14mm) and both PSIS(0.12mm) to posterior plane were decreased after Extension Trunk Exercise. Each of the exercises, The both inferior angle of Scapular showed high scores($0.65{\pm}0.23$) at Trunk Extension Exercise group and there was statistical significance between Trunk Flexion Exercise group and Extension exercise group(t :-2.502, p < 0.05). 7. At Pre-exercise group, Both inferior angle of Scapular showed low scores($0.23{\pm}8.27$) at Trunk Extension Exercise group and there was statistical significance between Pre- Exercise group and Trunk Extension Exercise group(t :-2.5430, p<0.05). Conclusion : The simple linear regression analysis was presented at Acromion(-0.243), L4-5(-0.753), PSIS(0.576) and there was statistical significance in BMI scale(p<0.01).

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.31 no.2
• /
• pp.103-115
• /
• 2009

In vertebrates, the face is mainly formed with neural crest derived neural crest cells by the inherent programs and the interactive environmental factors. Extracellular signaling-regulated kinase (Erk) is one of such programs to regulate the various cellular functions. And retinoic acid (RA) also plays an important role as a regulator in differentiation process at various stages of vertebrate embryogenesis. We wanted to know that the segregation as well as the patterning of maxillary and mandibular structure is greatly influenced by the maxillomandibular cleft (MMC) and the failure of this development may result in the maxillomandibular fusion (syngnathia) or other patterning related disorder. It has been well documented that the epithelium at this cleft region has significant expression of Fibroblast growth factor (Fgf) 8, and it is essential for the patterning of the first arch derived structures. By the morphological, skeletal, cell proliferation and apoptotic, and hybridization analysis, we checked the effects of Erk inhibition and/or RA activation onto MMC and could observe that Erk and RA signaling is individually and synergically involved in the facial patterning in terms of FGF signaling pathway via Barx-l. So RA and Erk signaling work together for the MMC patterning and the segregation of maxilla-mandible by controlling the Fgf-related signaling pathways. And the abnormality in MMC brought by aberrant Fgf signaling may result in the disturbances of maxillary-mandibular segregation.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.39 no.4
• /
• pp.214-221
• /
• 2023

In order to fabricate stable dentures in patients with severe resorption of residual ridges, various factors must be considered. One of them is the neutral zone, which is defined as the potential region in which the pressure of the tongue outward in the oral cavity and the pressure of the cheeks and lips directed inward from the outside of the oral cavity equalize during functioning. In patients with severe ridge resorption, if the teeth are usually arranged above the residual ridge, the teeth are located on the lingual side rather than the original position. Therefore, the functional space of the tongue is invaded, the tongue is positioned backward, and the sealing of the lingual border is broken, which acts as a factor reducing the maintenance of denture. In addition, it is also important for the stability of dentures to assume an interalveolar crest line connecting the maxillary and mandibular ridge crests, and to arrange the maxillary and mandibular artificial teeth to match the masticatory force to the interalveolar crest line. Therefore, good clinical results were obtained by fabricating dentures for the patient with poor alveolar residual ridge using neutral zone impression and ridge relationship analysis.

• International Journal of Oral Biology
• /
• v.37 no.2
• /
• pp.63-68
• /
• 2012

It has been documented that SPA0355 exerts antiinflammatory effects via the inhibition of nuclear factor-kappaB activation. In present study, we investigated the inhibitory effects of SPA0355 on periodontitis in an animal model. Periodontitis was induced by ligation of the cervix of the 1st molar in the left mandible in rats. After ligature, the rats were randomly divided into four groups and topically applied with SPA0355 (0.5, 1, and 2%) or the vehicle alone once daily for 10 days. Body weight and food intake were measured daily throughout the experimental period. At day 10 post-ligature, the infiltration of inflammatory cells and distance of the cementoenamel junction (CEJ) to the alveolar bone crest (ABC) in the distal area of ligatured tooth were estimated histopathologically. No changes in body weight or food intake were found between the control and SPA0355 groups. The degree of inflammation was decreased in all three SPA0355 application groups. A decrease CEJ-ABC distance was observed in the 0.5% and 1% SPA0355 groups. These results indicate that SPA0355 inhibits the infiltration of inflammatory cells and alveolar bone resorption and suggests its potential as a therapeutic agent for periodontitis.

• Structural Engineering and Mechanics
• /
• v.64 no.5
• /
• pp.661-670
• /
• 2017

The dynamic model test of dam-reservoir coupling system for a 203m high gravity dam is performed to investigate effects of reservoir water on dynamic responses of dam during earthquake. The hydrodynamic pressure under condition of full reservoir, natural frequencies and acceleration amplification factors along the dam height under conditions of full and empty reservoir are obtained from the test. The results indicate that the reservoir water have a stronger influence on the dynamic responses of dam. The measured natural frequency of the dam model under full reservoir is 21.7% lower than that of empty reservoir, and the acceleration amplification factor at dam crest under full reservoir is 18% larger than that under empty reservoir. Seismic dynamic analysis of the gravity dams with five different heights is performed with the Fluid-Structure Coupling Model (FSCM). The hydrodynamic pressures from Westergaard formula are overestimated in the lower part of the dam body and underestimated in its upper part to compare with those from the FSCM. The underestimation and overestimation are more significance with the increase of the dam height. The position of the maximum hydrodynamic pressure from the FSCM is raised with the increase of dam height. In view of the above, the Westergaard formula is modified with consideration in the influence of the height of dam, the elasticity of dam on the hydrodynamic pressure. The solutions of modified Westergaard formula are quite coincident with the hydrodynamic pressures in the model test and the previous report.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.35 no.2
• /
• pp.73-81
• /
• 2013

Purpose: Smad4 is a central mediator for transforming growth factor-${\beta}$/bone morphogenetic protein ($TGF-{\beta}/BMP$) signals, which are involved in regulating cranial neural crest cell formation, migration, proliferation, and fate determination. Accumulated evidences indicate that $TGF-{\beta}/BMP$ signaling plays key roles in the early tooth morphogenesis. However, their roles in the late tooth formation, such as cellular differentiation and matrix formation are not clearly understood. The objective of this study is to understand the roles of Smad4 in vivo during enamel and dentin formation through tissue-specific inactivation of Smad4. Methods: We generated and analyzed mice with dental epithelium-specific inactivation of the Smad4 gene (K14-Cre:$Smad4^{fl/fl}$) and dental mesenchyme-specific inactivation of Smad4 gene (Osr2Ires-Cre:$Smad4^{fl/fl}$). Results: In the tooth germs of K14-Cre:$Smad4^{fl/fl}$, ameloblast differentiation was not detectable in inner enamel epithelial cells, however, dentin-like structure was formed in dental mesenchymal cells. In the tooth germs of Osr2Ires-Cre:$Smad4^{fl/fl}$ mice, ameloblasts were normally differentiated from inner enamel epithelial cells. Interestingly, we found that bone-like structures, with cellular inclusion, were formed in the dentin region of Osr2Ires-Cre:$Smad4^{fl/fl}$ mice. Conclusion: Taken together, our study demonstrates that Smad4 plays a crucial role in regulating ameloblast and odontoblast differentiation, as well as in regulating epithelial-mesenchymal interactions during tooth development.