• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.1
• /
• pp.160-169
• /
• 1987

Numerical simulation of the flow of upper convected Maxwell fluid through planar 4:1 contraction has been performed using type dependent difference apprximation of vorticity equation. For creeping flow assumption, the numerical convergence has been achieved up to much higher values of elasticity parameter than those obtained by conventional finite difference method. For non-vanishing Reynolds number flow, it is shown that the corner vortices disappear, which is in good qualitative agreement with extant experimental results. In doing so, spatial distributions of stream function, vorticity and stresses are considered in relation to change of type of vorticity.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.5
• /
• pp.750-757
• /
• 2003

In order to determine creep stress intensity limit of high-temperature components, the usefulness of the creep work and time equation, defined as W$\_$c/t$\^$p/ = B(where W$\_$c/ = $\sigma$$\varepsilon$ is the total creep work done during creep, and p and B are constants), was investigated using the experimental data. For this Purpose, the creep tests for generating 1.0% strain for commercial type i16 stainless steel were conducted with different stresses; 160 MPa, 150 MPa, 145 MPa, 140 MPa and 135 MPa at 593$^{\circ}C$. The plots of log W$\_$c/ - log t showed a good linear relation up to 10$\^$5/ hr, and the results of the creep work-time relation for p, B and stress intensity values showed good agreement to those of isochronous stress-strain curves (ISSC) presented in ASME BPV NH. The relation can be simply obtained with only several short-term 1% strain data without ISSC which can be obtained by long-term creep data. Particularly, this relation is useful in estimating stress intensity limit for new and emerging class of high-temperature creeping materials.

• Journal of Environmental Policy
• /
• v.2 no.2
• /
• pp.65-79
• /
• 2003

More than 145 million tons of liquid whey is produced world-wide as dairy processing waste per year, and half of it is discarded without proper treatment. Due to its high nutrient value, the environmental impact can be significant. Bioconversion of cheese whey can provide an effective way to reduce the waste and, at the same time, generate economically attractive value-added chemicals. In this study, cheese whey was fermented with P. acidipropionici to produce propionic acid which has a high market value for chemical and pharmaceutical industries. In order to specifically enhance propionic acid production, acetic acid production was suppressed using o-iodosobenzoic acid as an enzyme inhibitor. When grown in the presence of the inhibitor, propionic acid production rate increased by a factor of 2 while acetic acid production rate decreased by a factor of 3. Furthermore, when 0.3 mM of o-iodosobenzoic acid was used, the incipient stage(creeping growth period) was considerably reduced. Therefore, the inhibitor helps the cells begin to grow earlier and speed up the production of propionic acid. Although the production rate of propionic acid effectively increased, the final concentration(or production yield) remained unchanged due to product inhibition. Methods that can reduce product inhibition are being tested combined with o-iodosobenzoic acid to optimize both the production rate and yield. The results are expected to be informative for controlling the other byproducts for other applications.

• Structural Engineering and Mechanics
• /
• v.43 no.3
• /
• pp.311-320
• /
• 2012

The higher-order asymptotic C(t) - $A_2(t)$ approach was employed to investigate the crack-tip stress of two collinear cracks in a power-law creeping material under the plane strain conditions. A comprehensive calculation was made of the single crack, collinear crack model with S/a = 0.4 and 0.8, by using the C(t) - $A_2(t)$ approach, HRR-type field and the finite element analysis; the latter two methods were used to check the constraint significance and the calculation accuracy of the C(t) - $A_2(t)$ approach, respectively. With increasing the creep time, the constraint $A_2$ was exponentially increased in the small-scale creep stage, while no discernible dependency of the constraint $A_2$ on the creep time was found at the extensive creep state. In addition, the creep time and the mechanical loads have no distinct influence on accuracy of the results obtained from the higher-order asymptotic C(t) - $A_2(t)$ approach. In comparison with the HRR-type field, the higher-order asymptotic C(t) - $A_2(t)$ solution matches well with the finite element results for the collinear crack model.

• Asian-Australasian Journal of Animal Sciences
• /
• v.10 no.4
• /
• pp.378-384
• /
• 1997

The ruminal solubility of copper (Cu), manganese (Mn), molybdenum (Mo), and zinc (Zn) in eight Philippine forages was studied. These forages were: 1) grasses: paragrass (Brachiaria mutica (Forsk.) Stapf), stargrass (Cynodon plectostachyum Pilger), and napiergrass (Pennisetum purpureum Schumach.); 2) creeping legumes: calopogonium or calopo (Calopogonium muconoides Desv.) and centrocema (Centrocema pubescens Benth.); 3) tree lequmes: gliricidia or kakawate (Gliricidia sepium (Jacq.) Walp.), leucaena or ipil-ipil (Leucaena leucocephala (Lam.) de Wit.), and sesbania or katuray (Sesbania grandiflora (L.) Poir). Nylon bags with samples were incubated for 0, 3, 6, 12, 24, 48 and 72h in three rumen cannulated sheep fed with timothy hay (Phleum pratense L.) at 2% body weight/d. The 0-h bags were washed with deionized water. There were species differences (p < 0.05) on the different solubilities of trace elements. At O-h incubation, the trend of solubility was Mo (54%) > Zn (43%) > Cu (38.7%) > Mn (29.5%). At 3-h incubation, all the elements except Mn had an average solubility above 50%. Combining particulate passage rate (1.9%/h) and various trace elements disappearance rates, the effective ruminal solubilization (ERS) of trace elements were computed. The ERS across species ranged from 44.6 to 89.9% for Cu, 29.9 to 84% for Mn, 66 to 95.1% for Mo, and 30.1 to 82.3% for Zn resulting to a trend of Mo > Zn > Cu > Mn.

• Korea-Australia Rheology Journal
• /
• v.21 no.1
• /
• pp.47-58
• /
• 2009

We have investigated the transient behavior of 1D fully developed Poiseuille viscoelastic flow under finite pressure gradient described by the Oldroyd-B and Leonov constitutive equations. For analysis we employ a simple $2^{nd}$ order discretization scheme such as central difference for space and the Crank-Nicolson for time approximation. For the analysis of the Oldroyd-B model, we also apply the analytical solution, which is obtained again in this work in terms of elementary solution procedure simpler than the previous one (Waters and King, 1970). Both models demonstrate qualitatively similar solutions, but their eventual steady flowrate exhibits noticeable difference due to the absence or presence of shear thinning behavior. In the inertialess flow, the flowrate instantaneously attains a large value corresponding to the Newtonian creeping flow and then decreases to its steady value when the applied pressure gradient is low. However with finite liquid density the flow field shows severe fluctuation even accompanying reversals of flow directions. As the assigned pressure gradient increases, the flowrate achieves its steady value significantly higher than its value during oscillations after quite long period of time. We have also illustrated comparison between 1D and 2D results and possible mechanism of complex 2D flow rearrangement employing a previous solution of [mite element computation. In addition, we discuss some mathematical points regarding missing boundary conditions in 2D modeling due to the change of the type of differential equations when varying from inertialess to inertial flow.

• Journal of Advanced Research in Ocean Engineering
• /
• v.2 no.3
• /
• pp.136-149
• /
• 2016

Green water impact occurs frequently on offshore platform due to waves with a height greater relative to the freeboard of the structure. This phenomenon exerts a large impact load on the deck. In this paper, offshore platform models with green water protectors of various shapes were fixed to the center of a 3D wave tank to measure the impact pressure acting on the various points on deck and protectors. The impact pressure distribution differed depending on the protector shape, and various patterns of wave creeping up the protector were observed. The protector shape that exerted the lowest pressure impact on the deck will be useful in the deck design of offshore platform, and the model test results will be expected to be used for designers to select the best protector form.

• Journal of the Economic Geographical Society of Korea
• /
• v.11 no.4
• /
• pp.600-617
• /
• 2008

Current rural development polices in Korea consist of three programs, namely: integrated rural community development, rural tourism development, and community based industry development. Within these areas, national and local policies have often concentrated on trying to encourage ‘bottom-up’ development revolving around the commodification of cultural or amenity resources. In important ways, the three categories of rural development programs are more of a community development program than an economic development program. In Korea, it is true to say that governmental decisionmaking is slowly being influenced in terms of community, self-reliance and self-help, which are gradually creeping into the discussion on rural development. I suggest that the planning process itself had to include broad public participation and partnership and bottom-up approaches, not merely the product of a planning office or consulting firm.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.12
• /
• pp.1455-1463
• /
• 2009

Theoretical mechanics analysis and finite element simulation were performed to investigate creep deformation behavior at the crack tip of transversely isotropic materials under small scale creep (SCC) conditions. Mechanical behavior of material was assumed as an elastic-$2^{nd}$ creep, which elastic modulus ( E ), Poisson's ratio ( ${\nu}$ ) and creep stress exponent ( n ) were isotropic and creep coefficient was only transversely isotropic. Based on the mechanics analysis for material behavior, a constitutive equation for transversely isotropic creep behavior was formulated and an equivalent creep coefficient was proposed under plain strain conditions. Creep deformation behavior at the crack tip was investigated through the finite element analysis. The results of the finite element analysis showed that creep deformation in transversely isotropic materials is dominant at the rear of the crack-tip. This result was more obvious when a load was applied to principal axis of anisotropy. Based on the results of the mechanics analysis and the finite element simulation, a corrected estimation scheme of the creep zone size was proposed in order to evaluate the creep deformation behavior at the crack tip of transversely isotropic creeping materials.

• The Plant Pathology Journal
• /
• v.16 no.5
• /
• pp.286-289
• /
• 2000

Mechanol extracts of three cold-tolerant eucalyptus trees-Eucalyptus darlympleana, E. gunnii and E. unigera were screened for antimicrobial activity against twenty two phyto-pathogenic fungi and six food-borne bacterial pathogens. E. unigera showed the antagonistic activity against all the tested pathogens. Among the tested fungal pathogens, Pythium species were highly sensitive to the leaf extracts. Especially, P. vanterpoolii, a causal agent of leaf blight in creeping bentgrass (Agrostis palustris), was completely inhibited by the extracts. The eucalyptus extracts were also effective in inhibiting the fungal growth of Botrytis cinerea and Phomopsis sp. isolated from the lesions of kiwifruit soft rot during post-harvest storage. Escherichia coli O-157 was less sensitive to the inhibition than the other bacterial pathogens tested. It was likely that Gram positive bacteria-Bacillus subtilis and Streptococcus mutans were more sensitive to the eucalyptus extracts than Gram negative bacteria-Escherichia coli, Salmonella enteritidis and Pseudomonas aeruginosa. Our findings suggest that the cold-tolerant eucalyptus species have antimicrobial properties that can serve the development of novel fungitoxic agents or food preservatives.