• Computers and Concrete
• /
• 제12권2호
• /
• pp.169-186
• /
• 2013

The aim of this paper is to determine the effect of soil-structure interaction and time dependent material properties on behavior of concrete box-girder highway bridges. Two different finite element analyses, one stage and construction stage, have been carried out on Komurhan Bridge between Elazi$\breve{g}$ and Malatya province of Turkey, over Fırat River. The one stage analysis assume that structure was built in a second and material properties of structure not change under different loads and site conditions during time. However, construction stage analysis considers that construction time and time dependent material properties. The main and side spans of bridge are 135 m and 76 m, respectively. The bridge had been constructed in 3 years between 1983 and 1986 by balanced cantilever construction method. The parameters of soil-structure interaction (SSI), time dependent material properties and construction method are taken into consideration in the construction stage analysis while SSI is single parameter taking into consideration in the one stage analysis. The 3D finite element model of bridge is created the commercial program of SAP2000. Time dependent material properties are elasticity modulus, creep and shrinkage for concrete and relaxation for steel. Soft, medium, and firm soils are selected for evaluating SSI in both analyses. The results of two different finite element analyses are compared with each other. It is seen that both construction stage and SSI have a remarkable effect on the structural behavior of the bridge.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 1999년도 High Temperature Superconductivity Vol.IX
• /
• pp.189-195
• /
• 1999

We have studied the vortex dynamics in YBa$_2Cu_3O_7$ single crystals with columnar defects using micro Hall-probe array. The Hall-probe array technique allowed a simultaneous measurement of the time and spatial dependence of the vortex density so that more detailed information on flux dynamics could be obtained. We found that field profiles inside sample were similar to the Bean's critical state model from the magnetic hysteresis measurement. Normalized relaxation rates were maximum near the center and decreased toward the edge if applied field H$_{app}$ is greater than the penetration field H. But applied magnetic field H$_{app}$ is less than H, relaxation rates were minimum near the center and increased toward edge. We found that glassy exponent ${\mu}$ has the value of ${\sim}$ 1 whose corresponding vortex motion is half-loop excitation. However, single vortex creep, ${\mu}$ ${\sim}$ 1/7, was also found at 30 K and H$_{app}$ ${\cong}$ H'. Calculation of activation energy, U, was possible from direct analysis of the local relaxation data using the basic diffusion equation. From these results, we found that U increases logarithmically with time and U around center was lower than that at the edge.

• 한국전산구조공학회논문집
• /
• 제24권5호
• /
• pp.531-542
• /
• 2011

본 논문에서는 3차원 유한요소법과 수치시간적분을 사용하여 교량 내 단면의 시간에 따른 온도분포를 결정하였다. 초기재령 구조물의 거동을 효과적으로 모사하기 위해 시간에 따라 변하는 재료특성과 온도분포에 따른 열응력을 고려하였다. 온도분포는 비선형이며 열전도율, 비열, 콘크리트의 수화열, 대류계수 등의 재료 상수들과 태양열에 영향을 받으므로 주요한 영향인자인 시공시의 계절, 풍속, 교량 상판포장에 대한 영향을 고려하였다. 본 논문의 해석결과와 이전의 다른 해석연구와 비교를 통해 제안된 수치모델의 타당성을 검증하였다. 네 개의 다른 교량 단면의 연구를 토대로 더 타당한 설계결과를 얻기 위해서는 콘크리트 교량에서의 크리프 변형이 고려되어야 된다는 점과 도로교설계기준에서 제시한 온도분포는 개선될 필요가 있다는 것을 알 수 있었다.

• 대한기계학회논문집A
• /
• 제26권7호
• /
• pp.1317-1323
• /
• 2002

This paper describes the comparison of calculated effective stress with experimental one in austenitic heat resistant steels, STS310J1TB and STS310S with and without a small amount of Nb and N. Based on a solute atoms diffusion model, contribution from soluble nitrogen to the high-temperature strength was numerically examined for austenitic heat-resisting Fe-Cr-Ni-N(STS310J1TB) and Fe-Cr-Ni (STS310S) alloys. The solute atmosphere dragging stress of dislocation was calculated in optional dislocation velocity of STS310J1TB and STS310S at $650^{\circ}C$, $675^{\circ}C$ and $700^{\circ}C$. As a result of the numerical calculation, the solute atmosphere dragging stress of STS310J1TB was about 50 times larger than that of STS310S. When the temperature became high, the maximum value of solute atmosphere dragging stress was small and the velocity of moving dislocation was fast. From the relationship between the dislocation rate and the solute atmosphere dragging stress, the relation of both was proportional and the inclination is about 1 in the level with low velocity of moving dislocation. From above results, the mechanism of dislocation movement in STS310J1TB was the solute atmosphere dragging stress. The solute atmosphere dragging stress, which was calculated from the numerical calculation was close to the effect stress in stress relaxation tests.

• 한국지반공학회지:지반
• /
• 제12권5호
• /
• pp.127-136
• /
• 1996

초 경량재인 E.P.S(20~30kg/m3)를 성토재로 사용하여 부족한 지지력과 침하에 대한 안정 성을 확보하는 방법이 최근 많이 사용되고 있다. 국내에서는 1993년 인천의 연약지반상 교대 됫채움재로 이 공법이 처음 사용된 이래 점차 활용이 늘어나고 있는 실정이다. 그러나 아직까지 EPS를 성토 재료로 사용한 지반에서 EPS의 거동을 예측하기 위한 합리적인 수치해석 모델이 제시되어 있지 않고 일축압축강도 및 크리프시험 결과에 따른 설계강도만이 제안되어 있는 실정이다. 따라서 본 연구에서는 성토재료로 사용된 EPS의 수치해석 모델을 제시하기 위하여 성토재로 사용되는 여러 종류 밀도의 EPS에 대해 구속압을 변화시키면서 삼축압축시험을 실시하였다. 삼축압축시험 결과를 분석하여 EPS의 축방향 변형률-응력 관계와 이의 도함수 그리고 포아송비를 밀도와 구속압에 의한 함수식으로 나타낼 수 있었다. 이 관계로부터 EPS의 거동을 예측하기 위한 비선형모델을 제안하였다.

• 한국농공학회지
• /
• 제39권3호
• /
• pp.72-82
• /
• 1997

In all inelastic deformations time rate effects are always present to some degree. Whether or not their exclusion has a significant influence on the prediction of the material behaviour depends upon several factors. In the study of structural components under static loading conditions at normal temperature it is accepted that time rate effects are generally not important. However metals, especially under high temperatures, exhibit simultaneously the phenomena of creep and viscoplasticity. In this study, elastoplastic and elasto-viscoplastic models include nonlinear geometrical effects were developed and several numerical examples are also included to verify the computer programming work developed here in this work. Comparisons of the calculated results, for the elasto-viscoplastic analysis of an internally pressurised thick cylinder under plane strain condition, have shown that the model yields excellent results. The results obtained from the numerical examples for an elasto-viscoplastic analysis of the Nuclear Reinforced Concrete Containment Structure(NRCCS) subjected to an incrementally applied internal pressure were summarized as follows : 1. The steady state hoop stress distribution along the shell layer of dome and dome wall junction part of NRCCS were linearly behave and the stress in interior surfaces was larger than that in exterior. 2.However in the upper part of the wall of NRCCS the steady state hoop stress in creased linearly from its inner to outer surfaces, being the exact reverse to the previous case of dome/dome-wall junction part. 3.At the lower part of wall of NRCCS, the linear change of steady state hoop stress along its wall layer began to disturb above a certain level of load increase.

• 대한토목학회논문집
• /
• 제33권2호
• /
• pp.729-737
• /
• 2013

콘크리트 포장의 환경하중은 온도하중과 수분하중으로 구분할 수 있으며, 이는 콘크리트 슬래브 내의 온도분포와 건조수축 및 크리프를 의미한다. 본 연구에서는 공항 콘크리트 포장의 역학적 설계에 필요한 환경하중을 산정할 수 있는 방법을 개발하였다. 먼저, 대상 지역과 설계 슬래브 두께를 결정한 후, 포장 온도 예측 프로그램을 사용하여 예측된 슬래브 깊이에 따른 콘크리트 온도분포를 등가선형 온도차이로 환산하였다. 기존 건조수축 예측 모형을 개선하여 지역별 상대습도를 고려하여 콘크리트의 건조수축을 예측한 후 부등건조수축 등가선형 온도차이로 환산하였다. 또한, 응력이완을 건조수축에 반영하였다. 결국, 온도에 의한 등가선형 온도차이와 수분에 의한 부등건조수축 등가선형 온도차이를 합하여 최종 환경하중인 총 등가선형 온도차이를 산정하였다. 적용 예를 보이기 위해 지역별 기상조건을 대표할만한 국내 민간공항 8곳 및 군공항 2곳의 환경하중을 본 연구에서 개발된 방법으로 계산하고 비교하였다.

• 콘크리트학회논문집
• /
• 제26권6호
• /
• pp.707-714
• /
• 2014

콘크리트 충전강관(CFT)은 강관의 내부에 콘크리트로 채워진 기둥이다. CFT는 강재와 콘크리트로 구성되며, 강재는 콘크리트를 내부에서 구속시켰고, 내부 콘크리트는 기둥의 압축하중을 감당한다. 본 실험에서 73~100MPa급 고강도 콘크리트에 관해 유동성실험, 압축강도실험, 압송압력실험을 실시하였으며, CFT용 고강도 콘크리트의 물리적 성질을 알아보기 위해 슬럼프, 슬럼프 플로우, 공기량, U-box시험, O-Lot시험, L-flow시험이 진행되었다. 이러한 연구의 결과를 바탕으로 Mock-up테스트에서 콘크리트 충전성 시험, 수화열 측정 시험, 응력계측 시험을 수행하였다. 현장적용은 상암동 및 서강대 현장의 두 곳에 각각 ${\Box}-566{\times}566{\times}10$, ${\Box}-400{\times}400{\times}25$의 대상기둥을 선정하여 현장계측을 진행하였다. CFT기둥의 장기거동 예측에 관하여 설계하중에 대해 콘크리트의 탄성변형과 건조수축, 크리프 수축을 고려한 ACI 209 재료모델을 사용한 결과는 계측결과와 거의 일치하였다.

• Nuclear Engineering and Technology
• /
• 제39권3호
• /
• pp.193-206
• /
• 2007

The Korea Atomic Energy Research Institute has developed an advanced fast reactor concept, KALIMER-600, which satisfies the Generation IV reactor design goals of sustainability, economics, safety, and proliferation resistance. The concept enables an efficient utilization of uranium resources and a reduction of the radioactive waste. The core design has been developed with a strong emphasis on proliferation resistance by adopting a single enrichment fuel without blanket assemblies. In addition, a passive residual heat removal system, shortened intermediate heat-transport system piping and seismic isolation have been realized in the reactor system design as enhancements to its safety and economics. The inherent safety characteristics of the KALIMER-600 design have been confirmed by a safety analysis of its bounding events. Research on important thermal-hydraulic phenomena and sensing technologies were performed to support the design study. The integrity of the reactor head against creep fatigue was confirmed using a CFD method, and a model for density-wave instability in a helical-coiled steam generator was developed. Gas entrainment on an agitating pool surface was investigated and an experimental correlation on a critical entrainment condition was obtained. An experimental study on sodium-water reactions was also performed to validate the developed SELPSTA code, which predicts the data accurately. An acoustic leak detection method utilizing a neural network and signal processing units were developed and applied successfully for the detection of a signal up to a noise level of -20 dB. Waveguide sensor visualization technology is being developed to inspect the reactor internals and fuel subassemblies. These research and developmental efforts contribute significantly to enhance the safety, economics, and efficiency of the KALIMER-600 design concept.

• Structural Engineering and Mechanics
• /
• 제47권1호
• /
• pp.59-73
• /
• 2013

The Xiaolan channel super large bridge is unique in style and with greatest span in the world with a total length of 7686.57 m. The main bridge with spans arranged as 100m+220m+100m is a combined structure composed of prestressed concrete V-shape rigid frame and concrete-filled steel tubular flexible arch. First of all, the author compiles APDL command flow program by using the unit birth-death technique and establishes simulation calculation model in the whole construction process. The creep characteristics of concrete are also taken into account. The force ratio of the suspender, arch and beam is discussed. The authors conduct studies on the three-plate webs's rule of shear stress distribution, the box girder's longitudinal bending normal stress on every construction stage, meanwhile the distribution law of longitudinal bending normal stress and transverse bending normal stress of completed bridge's box girder. Results show that, as a new combined bridge, it is featured by: Girder and arch resist forces together; Moment effects of the structure are mainly presented as compressed arch and tensioned girder; The bridge type brings the girder and arch on resisting forces into full play; Great in vertical stiffness and slender in appearance.