• Journal of Astronomy and Space Sciences
• /
• v.20 no.4
• /
• pp.269-282
• /
• 2003

We examined the hypothesis that the crater formation rate exhibits periodicity, employing data sets of Grieve (1991), Moon et al. (2001), and the Earth Impact Database(2002; DB02). DB02 is known to supercede previous compilations in terms of its accuracy and precision of the ages; it is the first time that this database has been used for periodicity analysis. For data sets comprising impact structures with $D{\geq}5km$(and also those with $D{\geq}20km$), there is no convincing evidence for periodicities in the crater ages, according to our Fourier analysis. However, we detected two peaks at 16.1Myr and 34.7Myr for craters with $D{\geq}30km$; we confirm that the age distribution of impact craters with $D{\geq}45km$ has dominant power at 16.1Myr. Thus, we may conjecture a probable periodic shower of Earth impactors with sizes $d{\geq}1.5km$. In addition, we found that the selection of data sets, the lower limits on the ages and diameters of impact craters, as well as the accuracy and precision of the ages, all constitute crucial factors in reconstructing the impact cratering history of the Earth.

• Journal of the Korean earth science society
• /
• v.34 no.7
• /
• pp.615-625
• /
• 2013

Many eruptions of Mt. Baekdusan volcano have been recorded in the historical literatures, and there were unrest precursors in 2002. Based on the geological survey results, it has been recognized that Mt. Baekdusan's Plinian eruptions had caused ashfall, followed by the occurrence of pyroclastic flows, which were caused by the collapse of eruption column. Therefore, we simulated the range of the impacts of pyroclastic flows, which were caused by small eruptions from a specific crater. Based on the simulation results, it can be interpreted that, when the pyroclastic flows are caused by the eruption column collapse from an eruption with less than VEI 3, the impacts will range from the outer rim of the caldera to the mountain slope 7 km at the maximum distance. Furthermore, it is interpreted that, when the eruption column occurs by the crater located inside the caldera, most will be deposited inside the caldera and what overflows will be deposited thickly mostly in the north valley, the upper stream region of Erdaobaihe.

• Geophysics and Geophysical Exploration
• /
• v.12 no.1
• /
• pp.1-7
• /
• 2009

Airborne electromagnetics (AEM) is a useful tool for investigating volcanic structures because it can survey large and inaccessible areas. Disadvantages include lower accuracy and limited depth of investigation. The Grounded Electrical Source Airborne Transient Electromagnetic(GREATEM)survey system was developed to increase the depth of investigation possible using AEM. The method was tested in a survey at Mount Bandai in north-eastern Japan. Mount Bandai is an andesitic stratovolcano that rises 1819m above sea level. An eruption in July 1888 left a hoof-shaped collapsed wall in its northern crater and avalanche debris at its base. Previous surveys of Mount Bandai allow for comparisons of data on its structure and collapse mechanism as obtained by GREATEM and other geophysical methods. The results show resistive structures in recent volcanic cones and conductive structures in the collapsed-crater area. Conductive areas around the collapsed wall correspond to an alteration zone resulting from hydrothermal activity, supporting the contention that a major cause of the collapse associated with the 1888 eruption was hydrothermal alteration that structurally weakened the interior of the volcanic edifice.

• Journal of the Korea Concrete Institute
• /
• v.27 no.2
• /
• pp.103-113
• /
• 2015

This paper studies impact performance of wire-mesh and steel fiber-reinforced concrete based on high-velocity impact experiments using hard spherical balls. In this experimental study, panel specimens were tested with various parameters such as steel fiber volume fraction, presence/absence of wire mesh, panel thickness, impact velocity, and aggregate size for the comparison of impact resistance performance for each specimen. While improvement of the impact resistance for reducing the penetration depth is barely affected with steel fiber volume fraction, the impact resistance to scabbing and perforation is improved substantially. This was due to the fact that the steel fiber had bridging effects in concrete matrix. The wire mesh helped minimizing the crater diameter of front and back face and enhanced the impact resistance to scabbing and perforation; however, the wire mesh did not affect the penetration depth. The wire mesh also reduced the bending deformation of the specimen with wire mesh, though some specimens had splitting bond failure on the rear face. Additionally, use of 20 mm aggregates is superior to 8 mm aggregates in terms of penetration depth, but for reducing the crater diameter on front and back faces, the use of 8 mm aggregates would be more efficient.

• Journal of Periodontal and Implant Science
• /
• v.27 no.3
• /
• pp.469-478
• /
• 1997

The purpose of this study was to evaluate the structural change of root surface and the occlusion of dentinal tubule following $CO_2$ laser treatment. Seven extracted healthy human premolar werw curetted, sectioned, and four specimens were randomly assigned to each of 6 different treatment groups : 1) untreated EDTA etched control: 2) root plande only: 3) $CO_2$ laser treated with 2W mode 6(10msec/pulse, 20pps) for 1 minute: 4) $CO_2$ laser treated with 2W mode 6(lOmsec/pulse, 20pps) for 2 minutes: 5) $CO_2$ laser treated with 2W mode 7(20msec/pulse, 20pps) for 1 minute: 6) $CO_2$ laser treated with 2W mode 7(20msec/pulse, 20pps) for 2 minutes. Following the prescribed treatment, the specimens were prepared for SEM evaluation. Results showed that $CO_2$ laser may be effective to occlude dentinal tubules tor dentin sensitivity treatment. The effect of dentinal tubule occlusion was enhanced with increasing the total energy level lased to specimen regardless of lasing mode. The structural changes of root surfaces were restricted to superficies, and these changes included fissuring, charring, crater formation over the smooth lava like texture. The charring and crater formation implying root damage was observed in the case of the longer duration of a pulse. The results of the present study suggests that the pulsed $CO_2$ laser with shorter pulse duration and longer exposure time can be used effectively in order to obtain the optimal dentinal tubule occlusion with minimal root damage.

• Korean Journal of Environmental Biology
• /
• v.36 no.4
• /
• pp.439-455
• /
• 2018

Hanon made in the largest maar crater in Korea, is the only paddy field ecosystem in Jeju Island that has been conducting rice farming, for the past 500 years. Flora surveys were conducted eight times, 2015-2018, to understand floristic characteristics and a restoration plan of the study area. As a result, vascular plants of Hanon paddy fields were listed 225 taxa that consist of 55 families, 151 genera, 194 species, 1 subspecies, 25 varieties, and 4 forms. The taxonomic group including the most species, was Gramineae (36 taxa). The next families were Compositae (29 taxa), Cyperaceae (20), Leguminosae (13), and Polygonaceae (11). Biological type of the Hanon was $Th-R_5-D_4-t$ type. The rare plants revealed 3 taxa; Ottelia alismoides(L.) Pers., Acorus calamus L., Pseudoraphis ukishiba Ohwi. Endemic plant revealed 1 taxon; Saururus chinensis(Lour.) Baill. Forty three taxa were naturalized plants composed of 15 families, 24 genera, 41 species, and 2 varieties. The urbanization index and naturalized index were 13.3% and 16.9%, respectively. The Hanon has high plant diversity, including endemic plant and rare plants, and is the only rice paddy in Jeju Island. So, the Hanon has sufficient values in ecological and socio-cultural aspects, so it should be maintained continuously in the future.

• Explosives and Blasting
• /
• v.36 no.4
• /
• pp.35-47
• /
• 2018

In this study, several concrete-block blast tests and AUTODYN numerical analyses were conducted to analyze the effects of different stemming and coupling materials on explosion results. Air, sand, and polymer gel were used as both the stemming and coupling materials. The stemming and coupling effects of these materials were compared with those of the full-charge condition. Soil-covered or buried concrete blocks were used for field crater tests. It was found from the concrete block tests and numerical analyses that both the crater size and the peak pressure around the blast hole were higher when the polymer gel was used than when the sand and the decoupling condition were used. The numerical analyses revealed the same trend as those of the field tests. Pressure peaks in concrete block models were calculated to be 37, 30, and 16 MPa, respectively, for the cases of the polymer gel, sand, and no stemming and decoupling condition. The pressure peak was 52 MPa in the case of full-charge condition, which was the highest pressure. But the damage area for the case was smaller than that obtained from the use of polymer gel. Full-charge was also used as a reference test.

• Journal of Korea Foundry Society
• /
• v.20 no.5
• /
• pp.290-299
• /
• 2000

A three-dimensional model was developed in order to simulate heat and fluid flow of a continuous casting billet. The model was coded with the general-purpose CFD program FIDAP, using the finite element method. The present model consists of 2 individual calculation schemes, named model 1 and model 2. Mold region only was calculated to check the pouring stream through submerged nozzle with model 1. Entire region, which consists of mold, secondary cooling, radiation cooling was calculated to predict crater end position, temperature profile and solid shell profile(model 2). Standard $k-{\bullet}\hat{A}$ turbulence model has been applied to simulate the turbulent flow induced by submerged nozzle. Enthalpy method was adopted for the latent heat of solidification. Fluid flow in mushy zone was treated using variable viscosity approach. The more casting speed and superheat increased, the more metallurgical length increased. The shell thickness at the mold exit is proved to be mainly controlled by superheat by the present simulation. It may be concluded that the present model can be successfully applied far the prediction of heat and fluid flow behavior in the continuous casting process.

• Journal of Astronomy and Space Sciences
• /
• v.25 no.2
• /
• pp.71-76
• /
• 2008

Study of terrestrial impact craters is important not only in the field of the solar system formation and evolution but also of the Galactic astronomy. The terrestrial impact cratering record recently has been examined, providing short- and intermediate-term periodicities, such as, ${\sim}26$ Myrs, ${\sim}37$ Myrs. The existence of such a periodicity has an implication in the Galactic dynamics, since the terrestrial impact cratering is usually interpreted as a result of the environmental variation during solar orbiting in the Galactic plane. The aim of this paper is to search for a long-term periodicity with a novel method since no attempt has been made so far in searching a long-term periodicity in this research field in spite of its great importance. We apply the cepstrum analysis method to the terrestrial impact cratering record for the first time. As a result of the analysis we have found noticeable peaks in the Fourier power spectrum appear ing at periods of ${\sim}300$ Myrs and ${\sim}100$ Myrs, which seem in a simple resonance with the revolution period of the Sun around the Galactic center. Finally we briefly discuss its implications and suggest theoretical study be pursued to explain such a long-term periodicity.

• Journal of the Korean Professional Engineers Association
• /
• v.21 no.1
• /
• pp.5-12
• /
• 1988

The purpose of this paper is to investigate on the optimum coating thickness layer of TiC-Al$_2$O$_3$ coated cemented carbide tool. Chemical Vapor Deposition (CVD) of a thick film of TiC-A1$_2$O$_3$ on a cemented carbide produces an intermediate layer, $1.5mutextrm{m}$, 4.5${\mu}{\textrm}{m}$, 7.5${\mu}{\textrm}{m}$ 10.5${\mu}{\textrm}{m}$, 4 kind of TiC between the substrate and the $1.5mutextrm{m}$ constant thick A1$_2$O$_3$ coating. Experiments were carried out with the test relationship between coating thickness and shear angle, surface roughness, cutting force, microphotograph of crater wear, flank wear, tool life. From the experimental results, it was found that the optimum coating thickness of TiC-A1$_2$O$_3$ is 6${\mu}{\textrm}{m}$. Although the coating thickness layer 9${\mu}{\textrm}{m}$. 12${\mu}{\textrm}{m}$ have a much loger tool wear than an 3${\mu}{\textrm}{m}$, 6${\mu}{\textrm}{m}$ coating tool in cutting condition feed 0.05mm/rev, and the condition of feed 0.2mm/rev, 0.3mm/rev has upon in the shot time phenomenon of chipping.