• 한국항공우주학회지
• /
• 제46권7호
• /
• pp.535-541
• /
• 2018

본 연구에서는 입자강화 복합재료의 파괴거동을 평가하기 위해 쐐기분열시험을 수행하였다. 균열 저항성을 분석하기 위해 균열선단열림변위(CTOD)와 균열선단열림각도(CTOA)를 이용하였다. 사용된 입자강화 복합재료는 특성상 온도와 하중속도에 영향을 많이 받기 때문에 다양한 온도($-60^{\circ}C{\sim}50^{\circ}C$)와 하중속도(5~500mm/min)조건에서 시험을 수행하였다. 또한 균열선단에 대한 변형률장을 분석하기 위해 디지털 이미지 상관법(DIC)을 이용하였다. 시험결과 파괴에너지는 온도가 감소할수록 증가하였으며, 하중속도가 증가할수록 균열저항성이 증가하였다.

• Journal of Welding and Joining
• /
• 제26권3호
• /
• pp.51-60
• /
• 2008

This paper is to evaluate fracture characteristics of API 2W Gr.50 TMCP steel weldment typically applied for offshore structures, with the focus on the influence of heat input arising from flux cored arc welding. Based on the results and insights developed from this study, it is found that the toughness for both CTOD and impact exhibits a tendency to decrease as the weld heat input increases. The reheated zone of weldmetal exhibit lower hardness than solidified zone and microstructure that are liable to affect the toughness are acicular ferrite and martensite-austenite constituents (M-A). In particular, M-A is a more effective micro-phase for CTOD toughness than impact toughness.

• Computers and Concrete
• /
• 제9권3호
• /
• pp.215-226
• /
• 2012

This article employs Support Vector Machine (SVM) for determination of fracture parameters critical stress intensity factor ($K^s_{Ic}$) and the critical crack tip opening displacement ($CTOD_c$) of concrete. SVM that is firmly based on the theory of statistical learning theory, uses regression technique by introducing ${\varepsilon}$-insensitive loss function has been adopted. The results are compared with a widely used Artificial Neural Network (ANN) model. Equations have been also developed for prediction of $K^s_{Ic}$ and $CTOD_c$. A sensitivity analysis has been also performed to investigate the importance of the input parameters. The results of this study show that the developed SVM is a robust model for determination of $K^s_{Ic}$ and $CTOD_c$ of concrete.

• International Journal of Concrete Structures and Materials
• /
• 제5권1호
• /
• pp.29-33
• /
• 2011

This article employs Least Square Support Vector Machine (LSSVM) for determination of fracture parameters of concrete: critical stress intensity factor ($K_{Ic}^s$) and the critical crack tip opening displacement ($CTOD_c$). LSSVM that is firmly based on the theory of statistical learning theory uses regression technique. The results are compared with a widely used Artificial Neural Network (ANN) Models of LSSVM have been developed for prediction of $K_{Ic}^s$ and $CTOD_c$, and then a sensitivity analysis has been performed to investigate the importance of the input parameters. Equations have been also developed for determination of $K_{Ic}^s$ and $CTOD_c$. The developed LSSVM also gives error bar. The results show that the developed model of LSSVM is very predictable in order to determine fracture parameters of concrete.

• Journal of Mechanical Science and Technology
• /
• 제14권1호
• /
• pp.30-38
• /
• 2000

This paper presents a framework how to estimate crack driving forces in terms of crack-tip opening displacement and J-integral for mismatched dissimilar joints with interface cracks. The mismatch in elastic, thermal, and plastic hardening properties is not considered, but the mismatch in plastic yield strengths is emphasized here. The main outcome of the present work is that the existing methods to estimate crack driving forces for homogeneous materials can be used with slight modification. Such modification includes (i) mismatch- corrected limit load solutions, and (ii) evaluating the contribution of each material in dissimilar joints to the total crack driving force, which depends on the strength mismatch of the dissimilar joints.

• 대한기계학회논문집A
• /
• 제24권4호
• /
• pp.955-962
• /
• 2000

Scanning Probe Microscope (SPM) such as Scanning Tunneling Microscope (STM) and Atomic Force Microscope (AFM) was shown to be the powerful tool for nano-scale characterization of a fracture surface . AFM was used to study cross sectional profiles and dimensions of fatigue striations in 2017-T351 aluminum alloy. Their widths (SW) and heights (SH) were measured from the cross sectional profiles of three-dimension AFM images. The following results that will be helpful to understand the fatigue crack growth mechanism were obtained. (1) Coincidence of the crack growth rate with the striation width was found down to the growth rate of 10-5 mm/cycle. (2) The relation of SH=0.085(SW)1.2 was obtained. (3) The ratio of the striation height to its width SH/SW did not depend on the stress intensity factor range K and the stress ratio R. (4) Not only the SW but also the SH changed linearly with the crack tip opening displacement (CTOD) when plotted in log-log scale. From these results, the applicability of the AFM to nano-fractography is discussed.

• 대한토목학회논문집
• /
• 제8권2호
• /
• pp.135-145
• /
• 1988

본(本) 연구(硏究)는 재료(材料)의 배합(配合)이 단순한 mortar를 제작 그 균열발생을 관찰, 측정하여 정적하중(靜的荷重)에 의한 균열 및 일정진폭을 갖는 동적하중(動的荷重)에 의한 균열성장영역 예측을 시도한 것이다. 사용시편은 mortar의 배합비(配合比)와 물-시멘트비(比)를 달리하여 ASTM E 561-80에서 제안한 CLWL-DCB(crack-line-loaded-double-cantilever-beam)의 제1방법인 벽개형(劈開型)모드(opening mode)에 의거 균열성장거동을 측정하였다. 본(本) 실험(實驗)에서는 X-Y recorder에 나타난 하중(荷重)(P)-균열개구변위($2V_1$), 균열개구변위($2V_1$)-균열선단개구변위($2V_2$)의 diagram을 해석하여 정적하중(靜的荷重)에 의한 균열선단의 비선형적인 미소균열을 포함하는 유효균열길이(effective crack length; $a_e$)와 균열선단의 미소균열을 제외한 물리적균열길이(physical crack length; $a_m$) 및 replica 필름으로 구한 균열길이(replica crack length; $a_t$)의 상관관계와 일정진폭을 갖는 반복하중에 의한 $a_e$, $a_m$, $a_t$를 구하여 정적하중(靜的荷重)에 의한 균열특성과 동적하중(動的荷重)에 의한 균열특성을 조사한 것이다.

• Geomechanics and Engineering
• /
• 제33권4호
• /
• pp.393-400
• /
• 2023

Displacements near crack and stress intensity factor (SIF) are key parameters to solve rock failure issue when using fracture mechanics. In order to study the horizontal displacement and stress intensity factor of the mode I fracture, a series of three-point bending tests of granite specimens with central notch were carried out. The evolution of horizontal displacements of precast notch and crack tip opening displacements (CTOD) were analyzed based on the digital image correlation (DIC) method. Stress intensity factors for three-point bending beams with arbitrary span-to-width ratios(S/W) were calculated by using the WU-Carlsson analytical weight function for edge-crack finite width plate and the analytical solution of un-cracked stress by Filon. The present study provides a high efficient and accurate method for fracture mechanics analysis of the three-point bending granite beams.

• 한국가스학회지
• /
• 제2권1호
• /
• pp.7-13
• /
• 1998

본 연구에서는 LNG 저장탱크의 안전성을 확보하기 위한 연구의 일환으로서, 실제 탱크의 건설에서와 같은 조건으로 SMAW(Shielded Metal Arc Welding) 방식으로 용접된 $9\%$ Ni강의 X-개선 후판용접부내의 파괴인성의 변화를 평가하고 미세조직을 분석하였다. 이때 파괴인성의 평가는 본 연구자들이 제안한 '개선한 CTOD(crack tip opening displacement) 시험법'으로 행하였으며 열영향부내의 미세조직 및 파면은 광학현미경, 주사전자현미경 및 X-선 회절 분석기로 관찰하였다. 결과로부터 열영향부 내의 CTOD 값은, 평가위치가 용융선(Fusion Line-F.L.)으로 접근할수록 감소하는 경향을 나타내었다. 이는 잔류 오스테나이트의 양이 줄어들고 결정립 미세화 효과가 없어지는 영역인 결정립 조대화영역이 열영향 부내에서 차지하는 분율이 증가함에 따른 것이다. 한편, 잔류 오스테나이트의 열적 안정성이 상대적으로 감소하게 되는 F.L.${\~}$F.L.+3mm에서 온도감소에 따른 인성감소의 정도가 F.L.+5mm${\~}$F.L.+7mm보다 상대적으로 매우 큼을 알 수 있었다.

• Computers and Concrete
• /
• 제4권3호
• /
• pp.221-241
• /
• 2007

Based on the experiment results, the damage and fracture behavior of concrete at the ages of 1d, 2d, 7d and 28d, in three-point bending and uniaxial tensile tests, were simulated with a finite element program, ABAQUS. The critical stress intensity factor $K_{IC}^s$ and the critical crack tip opening displacement ($CTOD_C$) of concrete were calculated with effective-elastic crack approach for the three-point bending test of grade C30 concrete. Based on the crack band model, a bilinear strain-softening curve was derived to simulate the LOAD-CMOD curves and LOAD-Displacement curves. In numerical analysis of the uniaxial tension test of concrete of grade C40, the damage and fracture mechanics were combined. The smeared cracking model coupling with damaged variable was adopted to evaluate the onset and development of microcracking of uniaxial tensile specimen. The uniaxial tension test was simulated by invoking the damage plastic model which took both damage and plasticity as inner variables with user subroutines. All the numerical simulated results show good agreement with the experimental results.