• 한국안전학회지
• /
• 제11권2호
• /
• pp.16-24
• /
• 1996

In this study we simulate the fatigue test of a compact tension specimen and obtain the displacements, stresses and strains by using the finite element method. And we examine the path independency of $\Delta$J integral values and compare it with $\Delta$J integral values calculated from load-load line displacement curve. From the results of this study, we can find that $\Delta$J integral show the path Independency for saturated materials. We can also find that the path independency of $\Delta$J Is not satisfied when different material Is assumed near the crack tip, but the difference in $\Delta$J is small. And $\Delta$J integral values calculated from load-load line displacement is very analogous with those from integration path but always have lower values than those from integration paths. In the case of crack closing, we found that $\Delta$J integral values from load-load line displacement should be calculated with the load Increment values based on the crack opening point. The unsaturated material is also simulated and its $\Delta$J shows different values according to the path, but the difference is small.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 봄 학술발표회 논문집(I)
• /
• pp.199-204
• /
• 1998

To analysis the failure character of Low-Heat concrete which is used to prevent the thermal crack caused by hydration heat, static loading test was performed by this test method, "Determination of the Fracture Energy of Motar and Concrete by Means of Three-Point Band Tests on Notched Beam" (suggested by RILEM 50-FMC Committe). This study compared and analysised the fracture energy of Mode I (opening mode), the most general pattern in the view of water-cemente ratio(W/C), compressive strength and age of Ordinary Portland Concrete and Low-Heat Concrete under the same mixture. The test results show that the case of Ordinary Portland Concrete and Low-Heat Concrete, low Water-Cemente ratio(W/C) cause the increase of fracture energy, and high failure-strength decrease failure-deflection, and the fracture energy of Low-Heat Concrete is similar to Ordinary Portland Concrete as the age increase. increase.

• Structural Engineering and Mechanics
• /
• 제87권1호
• /
• pp.47-56
• /
• 2023

Any pre-existed delamination defect present during manufacturing or induce during service loading conditions in the wingskin adherend invariably shows a greater loss of structural integrity of the spar wingskin joint (SWJ). In the present study, inter-laminar delamination propagation at the critical location of the SWJ has been carried out using contact and multi-point constraint finite elements available with commercial FE software (ANSYS APDL). Strain energy release rates (SERR) based on virtual crack closure technique have been computed for evaluation of the opening (Mode-I), sliding (Mode-II) and cross sliding (Mode-III) modes of delamination by sequential release of multi point constraint elements. The variations of different modes of SERR are observed to be significant by considering varied delamination lengths, material properties of adherends and radius of curvature of the SWJ panel. The SERR rates are seen to be much different at the two pre-embedded delamination ends. This shows dissimilar delamination propagation rates. The maximum is seen to occur in the delamination front in the unstiffened region of the wingskin. The curvature geometry and material anisotropy of SWJ adherends significantly influences the SERR values. Increase in the SERR values are observed with decrease in the radius of curvature of wingskin panel, keeping its width unchanged. SWJs made with flat FRP composite adherends have superior resistance to delamination damage propagation than curved composite laminated SWJ panels. SWJ made with Boron/Epoxy (B/E) material shows greater resistance to the delamination propagation.

• Computers and Concrete
• /
• 제9권2호
• /
• pp.81-97
• /
• 2012

This paper presents development of double-K fracture model for the split-tension cube specimen for determining the unstable fracture toughness and initial cracking toughness of concrete. There are some advantages of using of split-tension cube test like compactness and lightness over the existing specimen geometries in practice such as three-point bend test, wedge splitting test and compact tension specimen. The cohesive toughness of the material is determined using weight function having four terms for the split-tension cube specimen. Some empirical relations are also suggested for determining geometrical factors in order to calculate stress intensity factor and crack mouth opening displacement for the same specimen. The results of double-K fracture parameters of split-tension cube specimen are compared with those obtained for compact tension specimen. Finally, the influence of the width of the load-distribution of split-tension cube specimen on the double-K fracture parameters for laboratory size specimens is investigated. The input data required for determining double-K fracture parameters for both the specimen geometries are obtained using well known version of the Fictitious Crack Model.

• 대한기계학회논문집
• /
• 제12권1호
• /
• pp.123-130
• /
• 1988

본 연구에서는 비교적 데이터 처리속도가 빠른 80286계의 CPU를 사용한 16bit 퍼스널 컴퓨터를 이용하는 경우보다, 가격면에서는 훨씬 유리하면서도, 성능은 거의 뒤지지 않는 피로시험 자동화 및 피로거동 고정밀 측정을 위한 시스템을 완성하였다. 본 연구에서 사용한 방법 및 작성한 소프트웨어등은 사용시험기, 피로연구 대상등에 거의 관계없이 이용이 가능하나, 여기서는 편의상, 시험기로서는 폐루우프(closed-loop)유압서어보 피로시험기를 사용하였으며, 피로거동의 측정에 대해서는 주로 피로균열지전을 대상으로 하였다.

• Structural Engineering and Mechanics
• /
• 제54권6호
• /
• pp.1201-1216
• /
• 2015

This paper presents the details of size independent fracture energy and bi-linear tension softening relation for nano modified high strength concrete. Nano silica in powder form has been used as partial replacement of cement by 2 wt%. Two popular methods, namely, simplified boundary effect method of Karihaloo et al. (2003) and RILEM (1985) fracture energy with P-${\delta}$ tail correction have been employed for estimation of size independent fracture energy for nano modified high strength concrete (compressive strength ranges from 55 MPa to 72 MPa). It is found that both the methods gave nearly same values, which is an additional evidence that either of them can be employed for determination of size independent fracture energy. Bi-linear tension softening relation corresponding to their size independent fracture energy has been constructed in an inverse manner based on the concept of non-linear hinge from the load-crack mouth opening plots of notched three-point bend beams.

• Computers and Concrete
• /
• 제14권5호
• /
• pp.527-546
• /
• 2014

Portland cement concrete, which has higher strength and stiffness than asphalt concrete, has been widely applied on pavements. However, the brittle fracture characteristic of cement concrete restricts its application in highway pavement construction. Since the polypropylene fiber can improve the fracture toughness of cement concrete, Polypropylene Fiber-Reinforced Concrete (PFRC) is attracting more and more attention in civil engineering. In order to study the effect of polypropylene fiber on the generation and evolution process of the local deformation band in concrete, a series of three-point bending tests were performed using the new technology of the digital speckle correlation method for FRC notched beams with different volumetric contents of polypropylene fiber. The modified Double-K model was utilized for the first time to calculate the stress intensity factors of instability and crack initiation of fiber-reinforced concrete beams. The results indicate that the polypropylene fiber can enhance the fracture toughness. Based on the modified Double-K fracture theory, the maximum fracture energy of concrete with 3.2% fiber (in volume) is 47 times higher than the plain concrete. No effort of fiber content on the strength of the concrete was found. Meanwhile to balance the strength and resistant fracture toughness, concrete with 1.6% fiber is recommended to be applied in pavement construction.

• Computers and Concrete
• /
• 제32권2호
• /
• pp.173-184
• /
• 2023

In this study, mechanical, flexural post-cracking, and torsional behaviors of recycled steel fiber-reinforced concrete (RSFRC) incorporating steel fibers obtained from recycling of waste tires were investigated. Initially, three concrete mixes with different fiber contents (0, 40, and 80 kg/m³) were designed and tested in fresh and hardened states. Subsequently, the flexural post-cracking behaviors of RSFRCs were assessed by conducting three-point bending tests on notched beams. It was observed that recycled steel fibers improve the post-cracking flexural behavior in terms of energy absorption, ductility, and residual flexural strength. What's more, torsional behaviors of four RSFRC concrete beams with varying reinforcement configurations were investigated. The results indicated that RSFRCs exhibited an improved post-elastic torsional behaviors, both in terms of the torsional capacity and ductility of the beams. Additionally, numerical analyses were performed to capture the behaviors of RSFRCs in flexure and torsion. At first, inverse analyses were carried out on the results of the three-point bending tests to determine the tensile functions of RSFRC specimens. Additionally, the applicability of the obtained RSFRC tensile functions was verified by comparing the results of the conducted experiments to their numerical counterparts. Finally, it is noteworthy that, despite the scatter (i.e., non-uniqueness) in the aspect ratio of recycled steel fiber (as opposed to industrial steel fiber), their inclusion contributed to the improvement of post-cracking flexural and torsional capacities.

• 한국구조물진단유지관리공학회 논문집
• /
• 제24권2호
• /
• pp.111-118
• /
• 2020

이 논문에서는 섬유의 혼입량에 따른 휨부재의 장기거동에 대한 영향을 평가하기 위하여 후크형 강섬유로 보강된 고강도 콘크리트의 휨 크리프 거동에 대한 평가가 이루어졌다. 실험은 150 × 150 × 600mm 크기를 갖는 섬유 혼입량(0, 0.75 및 1.5%)을 변수로 하는 6개의 휨 시험체를 대상으로 하였다. 노치를 갖는 휨 시험체에 휨 크리프 하중을 도입하기 위하여 4점 가력 휨 시험장치가 활용되었다. 휨강도의 40%인 크리프 재하하중은 레버 장치를 활용하여 도입되었고 90일 동안 도입된 하중은 로드셀에 의해 제어되었다. 크리프 하중의 도입시, 시험체 중앙부에 설치된 노치의 균열개구변위(CMOD)가 측정되었다. 크리프 시험후 각 시험체 대한 휨시험을 실시하여 각 시험체의 잔여강도를 평가하였다. 이상과 같은 실험결과로부터 섬유 혼입량은 고강도 콘크리트의 휨 크리프 거동에 주요한 영향을 끼치고 휨강도의 40% 범위내의 지속하중은 섬유보강된 고강도 콘크리트의 잔여강도에 부정적인 영향을 끼치지 않았다.

• 콘크리트학회지
• /
• 제3권4호
• /
• pp.79-88
• /
• 1991

본 눈문에서는 강섬유 혼입에 따른 강섬유보강콘크리트의 강도 중대 현상을 규명하고 파괴에너지를 결정하기 위하여, 일련의 초기균열이 있는 강섬유보강콘크리트 시험체에 대하여 파괴실험을 수행하였다. 파괴실험은 3점 휨 실험법으로 실시하였으며, 실험시 각 시험체의 하중변화에 따른 휨 변형률, 중앙처짐, 균열끝 개구변위와 초기균열 발생시의 하중, 극한하중 등을 조사하였다. 이들 실험 걸과를 토대호 강섬유 혼입량과 초기균열비에 따른 강섬유 보강콘크리트의 파괴인성, 임계 에너지해방률 등을 비교 분석하였으며, 아울러 하중-처짐 선도를 이용한 파괴에너지를 결정하였다. 연구결과, 측정된 강섬유보강콘크리트의 하중-처짐선도는 강섬유 혼입량이 클수록 파괴후 완만하게 나타났으며, 하중-처짐선도 면적에 의하여 계산된 강섬유보강콘크리트의 파괴에너지는 강섬유 혼입량이 0.5%~1.0인 경우에 는 무근콘크리트의 파괴에너지의 약 7~10배, 강섬유 혼입량이 1.5%인경우에는 약 15배 각각 크게 나타났다.