• Nuclear Engineering and Technology
• /
• 제51권1호
• /
• pp.228-237
• /
• 2019

The crack growth responses of as-received and as-welded Alloy 600/182 and Alloy 690/152 welds to constant loading were measured by a direct current potential drop method using compact tension specimens in primary water at $325^{\circ}C$ simulating the normal operating conditions of a nuclear power plant. The as-received Alloy 600 showed crack growth rates (CGRs) between $9.6{\times}10^{-9}mm/s$ and $3.8{\times}10^{-8}mm/s$, and the as-welded Alloy 182 had CGRs between $7.9{\times}10^{-8}mm/s$ and $7.5{\times}10^{-7}mm/s$ within the range of the applied loadings. These results indicate that Alloys 600 and 182 are susceptible to cracking. The average CGR of the as-welded Alloy 152 was found to be $2.8{\times}10^{-9}mm/s$. Therefore, Alloy 152 was proven to be highly resistant to cracking. The as-received Alloy 690 showed no crack growth even with an inhomogeneous banded microstructure. The cracking mode of Alloys 600 and 182 was an intergranular cracking; however, Alloy 152 was revealed to have a mixed (intergranular + transgranular) cracking mode. It appears that the Cr concentration and the microstructural features significantly affect the cracking resistance and the cracking behavior of Ni-base alloys in PWR primary water.

• 전기화학회지
• /
• 제24권2호
• /
• pp.13-27
• /
• 2021

스테인레스 강은 지구상에서 가장 널리 사용되고 있는 철의 합금으로 니켈과 크롬을 포함하여 높은 내부식성을 가지고 있어 구조용 강재로 사용하기 매우 적합하다. 또한, 최근에는 스테인레스 강에 포함된 철과 니켈의 고유 특성을 이용하여 다양한 고기능성 촉매나 지지체, 또는 전극의 집전체 등으로의 응용 연구가 다양하게 이루어지고 있다. 특히, 높은 촉매 특성으로 인해 수전해 전극으로의 응용을 위한 스테인레스 강의 표면에서의 활성화 표면 처리 연구가 많이 이루어지고 있다. 이에 본 총설은 수전해 전극 응용을 위한 스테인레스 강의 수전해 전극 응용 표면처리 기술 자료를 정리 및 요약하였으며, 스테인레스 강의 표면처리 방법에 대한 특징 및 이를 통해 스테인레스 강이 저비용 고효율의 수전해 전극 활용을 위한 촉매 물질로써 응용될 수 있는 여러 방법을 제시하였다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2001년도 춘계학술발표회 초록집
• /
• pp.3-3
• /
• 2001

Recently TiN, TiAlN, CrN hardcoatings have adapted many industrial application such as die, mold and cutting tools because of good wear resistant and thermal stability. However, in terms of high speed process, general hard coatings have been limited by oxidation and thermal hardness drop. Especially in the case of PCB drill, high speed cutting and without lubricant process condition have not adapted these coatings until now. Therefore more recently, superhard nanocomposite coating which have superhard and good thermal stability have developed. In previous works, WC-TiAlN new nanocomposite film was investigated by cathodic arc ion plating system. Control of AI concentration, WC-TiAlN multi layer composite coating with controlled microstructure was carried out and provides additional enhancement of mechanical properties as well as oxidation resistance at elevated temperature. It is noted that microhardness ofWC-TiA1N multi layer composite coating increased up to 50 Gpa and got thermal stability about $900^{\circ}C$. In this study WC-TiAlN nanocomposite coating was deposited on PCB drill for enhancement of life time. The parameter was A1 concentration and plasma cleaning time for edge sharpness maintaining. The characteristic of WC-TiAlN film formation and wear behaviors are discussed with data from AlES, XRD, EDS and SEM analysis. Through field test, enhancement of life time for PCB drill was measured.

• 한국수정란이식학회:학술대회논문집
• /
• 한국수정란이식학회 2002년도 국제심포지엄
• /
• pp.99-99
• /
• 2002

The hormone resistin is associated with typeII diabetes mellitus in rodent model. Resistin impairs glucose tolerance and insulin action. A new class of anti-diabetic drugs were called thiazolidinediones (TZDs) downregulates a resistin which is induced during adipocyte differentiation. But the connection between increased adiposity and resistin remains unknown. The objectives of this study was to clone a mouse resistin cDNA and to generate transgenic mice overexpressing mouse resistin gene. The 555 bp of mouse resistin was amplified from mob cDNAS by polymerase chain reaction (PCR) and cloned into pCR$\^$(R)/ 2.1 TOPO T-vector. Mouse resistin mRNA on the basis of Genbank sequence (acession no. AF323080). Then, the PCR product was cloned into pTargeT$\^$TM/ mammalian expression vector that has pCMV promoter and chimeric intron. Restriction enzyme analysis with BamH I and Not I was carried out to determine an orientation of the insert in the vector. The pCMV-mus/resistin gene was prepared from previous recombinant pTargeT$\^$TM/-mus/resistin by digestion of Bgl II, and has used for microinjection into pronuclei of one cell embryos. The microinjected embryos were transfered to pseudopregnant foster-mother. Mouse resistin expression was detected in transgenic F1 mice by Reverse Transcriptase- Polymerase Chain Reaction (RT-PCR). Resistin gene expression mouse has heavier body weight which was measured higher level of plasma glucose than that of normal mouse. And in diet-induced experiments, the abdominal fat pads were isolated from each 24h starvation and re-feeding after fasting group mice that were assessed by RT-PCR analysis. In fasting group mice, resistin expression was higher than that of re-feeding group mice. This result suggests that the resistin gene overexpressing mice may be became to obesity and be useful as an animal disease model to be diabetes mellitus caused by insulin resistance of resistin.

• 대한환경공학회지
• /
• 제22권4호
• /
• pp.765-773
• /
• 2000

$TiO_2$ 코팅매체를 이용한 humid acid의 광분해 특성을 조사하였다. $TiO_2$ 코팅은 $TiOCl_2$ 수용액을 암모니아수로 침전시킨 겔을 과산화수소로 용해한 용액 혹은 졸이나 titanium tetraisopropoxide (TTIP)의 가수분해로부터 제조한 졸을 이용하여 dip-coating법으로 제조하였다. Titanium peroxo 용액을 열처리하여 제조한 졸을 이용한 코팅층은 X-선 회절 분석으로부터 $25^{\circ}C{\sim}500^{\circ}C$ 온도 범위에서 모두 anatase형 결정구조를 가지고 있었다. 반면에 TTIP의 가수분해로 생성된 졸로부터 만든 코팅막은 $400^{\circ}C$ 이상에서 anatase의 결정형이 나타났다. 이로부터 titanium peroxo 용액을 열처리하여 제조한 졸은 내열성 및 비내열성 기판에도 결정성 $TiO_2$ 코팅층을 만들 수 있는 장점이 있다. 코팅막의 두께 및 균일성은 인출속도, 코팅졸의 농도 및 코팅 횟수에 영향을 받았으며, 코팅막의 두께에 따라 다양한 간섭색상을 나타냈다. 0.2M 졸을 이용하여 인출속도 2.5cm/min로 2회 코팅했을 경우, 약 50nm 두께의 투명하면서도 균일한 흐린 남색을 띠는 $TiO_2$ 코팅막을 얻을 수 있었다. 이상의 방법으로 직경 0.3cm의 유리구슬에 $TiO_2$ 코팅막을 제조한 후 $580cm^3$의 반응조를 사용하여 $UV/H_2O_2$ 공정으로 humic acid를 40분 동안 광반응시킨 결과, 초기 시료의 $COD_{cr}$ (40ppm) 을 약 85% 이상, 흡광물질을 약 95% 이상 제거하였다.

• 한국결정성장학회지
• /
• 제18권3호
• /
• pp.115-121
• /
• 2008

제강분진(EAF dust, 이하 더스트) 50wt%와 핵 형성제를 함유한 규산염계 유리 시편을 열처리하여 결정화 시킨 후 미세구조를 관찰하였다. 제조된 유리의 DTA 분석결과 결정화온도($T_c$)는 $850^{\circ}C$ 부근이었으며 이로부터 열처리 조건을 $950^{\circ}C$/15 hr로 정하였다. 핵 형성제 $TiO_2$는 $Fe_2O_3$나 $Cr_2O_3$에 비해 기계적 특성 및 화학적 내구성이 willemite 결정보다 우수한 franklinite 결정상의 성장을 시키는 효과가 탁월하였다. $TiO_2$가 첨가된 일부 결정화 유리 시편에서 augite 결정상이 관찰되었으며, 첨가량이 증가할수록 willemite 결정상은 줄어들고 franklinite 결정상은 증가하였다. 특히 5wt% 첨가된 시편은 willemite 결정상이 나타나지 않았으며 $1{\sim}2\;{\mu}m$ 크기의 franklinite 결정상이 유리 모상내에 고르게 분포되어 있었다. 또한 $TiO_2$가 5wt% 첨가된 시편에 $Fe_2O_3$를 첨가하면 franklinite 결정상들이 더욱 성장하여 서로 합체됨으로서 수지상 모양의 결정상을 나타내었다.

• Journal of the Korean Wood Science and Technology
• /
• 제13권2호
• /
• pp.35-44
• /
• 1985

The purposes of this study were, first, to investigate retention levels of toxic elements and oxide individual plies for each panel and, second, to examine disproportioning of individual toxic elements Thirty five water gum plywood panels were treated with a copper-chromium-arsenic preservative (CCA) by the soaking process as the treament time were applied. Such individual plies at a distance of 2.5cm, 7.5cm from the edge were assayed for CuO, $CrO_3$, and $As_2O_5$ on the basis of copper, chromium and arsenic content by Atomic Absorption Spectrophotometry. In these experiments, 12mm thickness plywood panels made of water gum, which were selling, were selected for the preservative treatment. Treating solutions were prepared for 10%, dilute solution of copper-chromium-arsenic preservative and then 1, 3, 6, 12 and 24 hours soaking trements in CCA preservative were applied. The results obtained are as follows: 1. The retention of total oxide in the face and back plies (1+7) retained more than the retention of total oxide in the other plies. The total oxide retention for the individual plies except the face and back plies (1+7) was showed in the following orders; cross plies (3+5), cross plies (2+6), core ply (4). 2. The retentions of total oxide increased as the increase of treatment time. The CCA treated plywood retained high levels of total oxide retention in the face and back plies (1+7). 3. All the retentions in the face and back plies (1+7) is over 5Kg/$m^3$, New Zealand Timber Preservation Standards Specification, and after 6 hours, the retentions in the cross plies (3+5) is over 4. The relative penetration of copper, chromium, and arsenic were not affected by the treatment time. The proportion of arsenic decreased in relation to both copper and chromium and the proportion of copper increased in relation to both chromium and arsenic. 5. A disproportioning of copper, chromium occurred with longer distance from edge, and with longer distance from edge the leachability resistance of CCA treated specimens decreased. After 6 hours (soaking time), the proportion of active elements at a distance of 2.5cm from the edge was consistent. And after 24 hours-soaking, the proportion of active elements at a distance of 7.5cm from the edge was consistent.

• 한국산학기술학회논문지
• /
• 제21권8호
• /
• pp.248-255
• /
• 2020

경사화 두께를 갖는 열차폐 코팅의 열적 내구성과 열적 안정성에 대한 코팅층 두께의 영향을 화염 열피로 시험과 열충격 시험을 통해서 조사하였다. Bond 층과 top 층은 각각 Ni-Cr계 상용 MCrAlY 분말과 상용 이트리아 안정화 지르코니아 (YSZ) 분말을 사용하여 니켈기지의 초내열합금 모재 (GTD-111)에 대기 플라즈마 용사법 (APS)으로 코팅층을 형성하였다. 1100 ℃의 화염으로 1429회 열피로 시험 후 bond 층이 일부 산화되고 top 층과 bond 층 계면에서 열화에 의한 산화층 (TGO)이 관찰되었으나, 코팅층 부위와 관계없이 균열이나 박리현상 없는 양호한 미세구조를 나타내었다. 1100 ℃ 열충격 시험결과, 37회 열충격 테스트 후 코팅층의 얇은 부위에서 박리가 시작되어 98회 시험 후 코팅층의 50% 이상이 박리되었으며, 코팅층의 두께가 얇게 형성된 부위는 코팅층이 두껍게 형성된 부위에 비해, top 층의 박리와 함께 bond 층의 산화가 많이 진행되었으며, 코팅층 두께가 상대적으로 두껍게 형성된 부위에서 열차폐 효과의 증가로 인해 bond 층의 내산화성과 열적 안정성이 우수한 것으로 나타났다.

• 한국임상약학회지
• /
• 제27권3호
• /
• pp.186-194
• /
• 2017

Objectives: A significant concern has been raised about the emerging resistance that is largely caused by the excessive or inappropriate use of antibacterial agents for viral respiratory infections. This study investigated the trend of respiratory tract infections (RTIs) and the use of antibiotics. Methods: Utilizing the national level health insurance claims data from 2005 to 2008, we examined encounter days, antibiotic use, and the prescription rate for respiratory tract infections including upper respiratory tract infections (URTIs), lower respiratory tract infections (LRTIs), and otitis media in outpatient settings. The antibiotic use was measured as defined daily dose per 1,000 patients per day (DDD/1,000 patients/day). Results: The visit for URTI increased from 141,693,465 in 2005 to 120,717,966 in 2008 and the visit for LRTI decreased from 61,778,718 to 66,930,122. For RTIs, prescription rates of antibiotics decreased from 65.2% to 58.5% for URTIs and 76.9% to 68.3% for LRTIs from 2005 to 2008. The antibiotic use decreased to 20.85 DDD/1,000 patients/day after a significant increase of 22.01 DDD/1,000 patients/day in 2006. Among antibiotics, J01CR had the highest use- 7.93 DDD/1,000 patients/day followed by J01DC of 3.71 DDD/1,000 patients/day and J01FA of 3.2 DDD/1,000 patients/day. One notable trend is that J01FA presented a continuous increase in antibiotic use from 2.3 in 2005 to 3.26 DDD/1,000 patients/day in 2008. Conclusion: The use of antibiotics had poor compliance to guidelines for RTIs. Despite decrease in the use of antibiotics, prescription rates for URTIs were still about 50% indicating that the delayed prescribing antibiotics (or wait-and-see) were not observed.

• 접착 및 계면
• /
• 제21권3호
• /
• pp.81-85
• /
• 2020

Shaving dust는 천연 피혁 제조 공정 중 두께 조절을 위해 발생하는 피혁 폐기물인 콜라겐 섬유로 크롬을 함유하고 있어 매립 시 환경오염 문제를 야기시킨다. 현재 유럽을 중심으로 다양한 국가에서 피혁 폐기물인 Shaving dust를 활용한 다양한 연구가 진행되고 있으며, 그 중 재생피혁(Bonded leather)은 천연 피혁 대체가능한 소재로 주목받고 있다. 재생 피혁은 바인더로 라텍스를 사용하여 다른 합성 피혁에 비해 내부 조직이 치밀하여 중량감이 높고 통기성이 저하되는 단점이 있어 열팽창성 Microsphere를 도입하여 내부 조직을 완화시켜 통기성 및 경량성 등 기능성을 개선하고자 하였다. 본 연구에서는 Shaving dust를 활용한 경량 재생피혁 제조에 관한 연구로, 열팽창성 Microsphere를 적용한 후 콜라겐 섬유의 내열성을 감안하여 100~120℃에서 발포시켜 그 경향성을 분석한 결과 120℃에서 8분간 처리하였을 때 가장 우수한 발포율을 나타내었고, 재생 피혁 단면의 SEM 분석을 통해 발포에 따른 내부 조직의 변화를 관찰하였다.