• 한국군사과학기술학회지
• /
• 제13권2호
• /
• pp.275-282
• /
• 2010

The improved properties of surface layer can be achieved by so-called "new salt bath nitriding(NSBN)", which has been developed by a domestic company. This process based upon modified traditional salt bath nitriding process, increased hardenability with minimum toughness deterioration. This process also offers not only less white layer surfaces but also more eco-friendly one. That is, NSBN is the new eco-friendly surface treatment technology removing harmful $CN^-$ and toxic gas. According to the research of applying NSBN to Cr-Mo-V steel which has been used in defense industry, showed the improved result of wear resistance and surface hardening than non-coated condition. In further, we expect NSBN to curtail expenses and productivity improvement applied to the various defense industry parts.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.132-137
• /
• 2001

Miniaturized specimen technology is useful to characterize the mechanical behavior using a minimum volume of material, because it is almost impossible to sample the conventional specimen for the fracture toughness test without damage to equipment. Test material was 1Cr-1Mo-0.25V steel which was widely used for turbine rotor material. Two kinds of miniaturized impact specimens were prepared, i.e., miniaturized specimen with side groove and without side groove. The correlation between ductile brittle transition temperature(DBTT) of full size impact specimen and that of miniaturized impact specimen was made. The characteristics of miniaturized impact specimens technique as well as fracture stress were discussed. Finally, we concluded that the characteristics of fracture stress change on aging time were similar to that of DBTT.

• 대한기계학회논문집A
• /
• 제27권2호
• /
• pp.255-261
• /
• 2003

It is advantageous to use NDE methods to assess the mechanical properties of materials since the conventional method is time-consuming and sometimes requires cutting of sample from the component. The NDE parameters such as ultrasonic velocity and attenuation, electric resistivity, and magnetic coercive force and remanance have been utilized to evaluate changes of material properties due to heat treatment condition. It has been found that changes of materials properties under quenched and tempered/PWHT treatments could not be detected using EMAT and Electrical resistivity methods. However, victors hardness and magnetic hysteresis loop decreased with heat treatment procedures. These results were obtained using 3Cr-lMo-0.25V steel. The magnetic parameters were found to be most sensitive to changes of material properties.

• 열처리공학회지
• /
• 제10권4호
• /
• pp.266-277
• /
• 1997

Near-threshold fatigue crack growth characteristics was investigated on the Ni-Cr-Mo-V low alloy steel, which has the different microstructure obtained by tempering at various temperature. The specimens were austenized at $950^{\circ}C$ and then followed by tempering at $200^{\circ}C$, $530^{\circ}C$ and $600^{\circ}C$. Strain rate was obtained from strain gauge attached on the crack tip and crack opening point was observed through load-strain curve. Threshold stress intensity range(${\Delta}K_{th}$) was increased with increasing tempering tempuerature, but the effective threshold stress intensity rage (${\Delta}K_{eff,\;th}$) was not affected with the increasing temperature. Grain size increased with increasing tempering temperature.

• 대한기계학회논문집
• /
• 제18권11호
• /
• pp.2837-2845
• /
• 1994

Several methods have been developed to predict on the remaining life of the old power plants. However, Larson-Miller parameter, one of existing creep life prediction methods, has not reflected the effect of material degradatioin and grain size. So this study has been carried out to research the effects of material degradation and austenite grain coarsening on the life prediction of 3.5Ni-Cr-Mo-V steel. An experimental result shows that carbide coarsening has no significant effects on the creep rupture life and the Larson-Miller parameter, but grain coarsening has an important influence on the creep ruptrure life and the Larson-Miller parameter. Therefore Larson-Miller constant, K should be determined to consider on the chemical composition and the grain size of materials.

• 대한공업교육학회지
• /
• 제31권1호
• /
• pp.200-210
• /
• 2006

초기 응력부식균열에 대한 감수성 평가 시험법인 C링 시험법(C-ring Test)은 용접부의 후열처리 균열감수성을 평가하는 시험법으로 적합하다고 알려져 있다. C링 시험법은 실제 용접부 열영향부에 노치를 제작하여 잔류응력이 열영향부에 미치는 영향을 평가할 수 있다는 장점을 가지고 있다. 따라서 본 연구에는 C링 시험법을 이용하여 원자력 발전소 압력용기에 사용되는 Co-Mo강의 용접부 결함 발생 현상을 검토 하고자 Co-Mo강에 대하여 후열처리를 실시하였으며, C링 시험법을 통하여 용접 열영향부의 후열처리 균열을 평가하고자한다. 결론은 다음과 같다. 바나듐 모디파이 합금(AMAX 3Cr-1Mo­-0.1V, JSW 3Cr-­1Mo-­V-­Ti-­B 및 JSW $2\frac{1}{4}Cr$-1Mo-­V-­Ti-­B강)은 Berkeley $3Cr-1\frac{1}{2}Mo-\frac{1}{2}Ti$ 및 $2\frac{1}{4}Cr$-­1Mo합금강보다 후열처리 균열에 대한 감수성 보다 높게 나타났다. C-ring 시험에 있어서 바나듐 모디파이 합금은 2종의 후열처리조건과 3종의 응력조건에서 모두 균열을 나타냈으나 Berkeley $3Cr-1\frac{1}{2}Mo-\frac{1}{2}Ni$강과 Luken $2\frac{1}{4}Cr-1Mo0.1C$재료는 690MPa와 더 이상의 응력조건에서 2종의 후열처리를 실시하는 조건에서도 균열이 발생하지 않았다. C-ring 시험결과, 균열깊이는 바나듐 모디파이 재료인 경우, 낮은 후열처리온도와 비교해서 높은 후열처리온도인 경우가 감소하고 있다. C-ring 시험에 대한 SEM분석결과 균열은 오스테나이트 결정 입계를 따라 파괴되는 파괴양상을 나타내고 있으며 연성파면은 나타나지 않았다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.678-683
• /
• 2003

Ultrasonic method using SH(shear horizontal) wave has been developed to determine the surface damage in fatigued material. Fatigue damages based on propagation energy were analyzed by multiregression analysis and phase measurement in interrupted fatigue test specimen including CrMoV and 12Cr alloy steel. From the test results, as the fatigue damage increased the propagation time of the launched waves increased and amplitude of wavelet decreased. Also, analysis for the waveform modulation showed a reliable estimation, with confidence limit of 97% for 12Cr steel and 95% for CrMoV steel, respectively. Therefore, It is thought that SH ultrasonic wave technique can be applied to determine fatigue damage of in-service component nondestructively.

• Archives of Metallurgy and Materials
• /
• 제65권4호
• /
• pp.1297-1301
• /
• 2020

The purpose of this study was to investigate the mechanical properties of beta type aged Ti-4Mo-4Cr-X (X = V, Sn, Zr) quaternary alloy for use as a cardiovascular stent. Titanium (Ti) alloys were fabricated using a vacuum arc remelting furnace process. To homogenize the specimens of each composition and remove the micro segregation, all cast specimens were subjected to homogenization at 850℃ for 4 h, which was 100℃ higher than the β-transus temperature of 750℃. The tensile strength and elongation of the aged Ti-4Mo-4Cr-X (X = V, Sn, Zr) alloys were increased as compared to the homogenized alloys. In addition, many α/β interface boundaries formed after aging treatment at 450℃, which acted as inhibitors of strain and caused an increase in tensile strength. The elongation of Ti-4Mo-4Cr-X alloys consisting of α + β phases after aging treatment was improved by greater than 30%. Results of a potentiodynamic polarization test showed that the lowest current density of Ti-4Mo-4Cr-4Sn with 1.05 × 10^-8 A/cm² was obtained. The present Ti-4Mo-4Cr-X alloys showed better corrosion characteristics as compared to the 316L stainless steel and L605 (Co-Cr alloy) cardiovascular stent alloys.

• 대한기계학회논문집A
• /
• 제20권9호
• /
• pp.2819-2832
• /
• 1996

The estimation of the remaining life for the aged components in power plant as well as chemical and petroleum plants has been recently concerned. The raw materials used in this study are the 1Cr-1Mo-0.25V steel which intensified P and S compositions along with the nominal compositions of ASTM A 470 standard. Five kinds of specimens with the different degradation levels were prepared by isothermal aging heat treatment at 630.deg.C. The mechanical properties and rotated bending fatigue strength of virgin and aged 1Cr-1Mo-0.25V steel have been investigated through the hardness, tensile, fatigue test, SEM fractograph and EDS analysis at 538.deg.C and room temperature, respectively. Thus the data of aged specimens were compared with those of virgin specimen to evaluate the aging effects. The main results obtained in this study are as follows ; The decrease of the yield and tensile strength due to degradation was distinguished until 50, 000hrs simulated service time. And it was confirmed that the considerable amount of P, Mn, Cr and S was precipitated at the grain boundary of aged material through the SEM and EDS analysis. The rotated bendingd fatigue strength at 538.deg.C of virgin, 25, 000, 50, 000, 75, 000 and 100, 000 hrs aged material was decreased 44.6 %, 49.6 %, 51.5 %, 52.4% and 53.8% than that of virgin material at 10$_{7}$cycles of room temperature, respectively. The major cracks of virgin and aged materials mainly initiated at the inclusions including Si, P and Mn compositions which were located at the outer periphery of the specimen.n.

• 대한기계학회논문집
• /
• 제18권7호
• /
• pp.1722-1729
• /
• 1994

At early stage of creep-fatigue crack growth tests, initial transient behavior which implies high crack growth rate has been generally observed by some researchers. Since the influence of the initial transient crack growth behavior on the remaining life of components is significant, cause of it should be further studied. In this study, characteristics of the initial transient behavior of 1Cr-1Mo-0.25V steel is studied experimentally by performing creep-fatigue crack growth tests at $538^{\circ}C$ in air under trapezoidal waveshapes. It is verified that the cause of the initial transient behavior is not high ${(C_t)}_{avg}$ values due to the small scale creep condition at the early stage of test, but oxidation-dominated crack growth mechanism during the transient period which is different from the creep-dominated crack growth mechanism in steady crack growth period.