• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.42-42
• /
• 2009

마찰교반접합 (Friction Stir Welding)은 1991년 영국 TWI에서 개발된 접합 법으로서 회전하는 툴이 재료내부에 삽입되면 툴과 재료사이에서 발생하는 마찰열에 의하여 온도가 상승하게 되어 재료는 연화되고, 이러한 재료 내부에서 회전하는 툴이 이동하게 되면 재료 내부는 기계적 교반에 의해 소성변형이 일어남과 동시에 접합이 이루어진다. 마찰교반접합은 동적 재결정에 의한 접합부의 미세한 결정립 형성으로 인하여 기계적 특성이 향상되며 보호 가스가 필요 없어 친환경적임과 동시에 용융 용접 법에 비해 접합 시 에너지 소모가 적으며 또한 접합 후 접합부에서의 변형이 상대적으로 적다는 장점이 있다. 이러한 장점을 가진 마찰교반접합은 알루미늄 합금, 마그네슘 합금 그리고 동 합금과 같은 저 융점 비철재료에 많은 연구와 적용 사례들이 있어왔다. 하지만 최근에는 일반 탄소강, 연강, 오스테나이트계 스테인리스강, 니켈 합금, 티타늄 합금과 같은 고융점 재료에도 연구 및 적용이 진행되고 있는 추세이다. 페라이트계 스테인리스강은 가격이 비싼 Ni을 함유하지 않아 오스테나이트계 스테인리스강에 비하여 강재의 가격은 낮으면서도 고온특성 및 내식성이 우수하여 건축용, 자동차 배기계용으로 널리 사용되고 있다. 하지만 이런 장점을 가진 페라이트계 스테인리스강을 기존의 용융 용접 법으로 접합 시 용접부 및 열영향부에서의 결정립의 조대화로 인한 인성 및 연성이 저하되며, 특히 예민화된 열영향부 입계 내에 Cr 탄화물이 석출되어 입계주변에 Cr 결핍 층을 형성되어 입계부식이 발생되는 문제점이 발생된다. 본 연구에서는 마찰교반접합을 이용하여 두께 3mm의 409 스테인리스강에 대해 맞대기 접합을 실시하였다. 접합 변수를 툴의 재료 (WC-12wt%Co, $Si_3N_4$)로 하여 접합을 실시하였고 접합 후 외관상태 점검, 광학 현미경과 주사 전자 현미경을 통하여 미세조직을 관찰하였으며 황산-황산동 부식 시험을 실시하여 접합부의 부식 특성을 평가하였다.

• Korean Chemical Engineering Research
• /
• v.54 no.6
• /
• pp.863-870
• /
• 2016

We investigated the physical/chemical phenomena that a slow loss of $CO_2$ inventory into sodium after the sodium-$CO_2$ boundary failure in printed circuit heat exchangers (PCHEs), which is considered for the supercritical $CO_2$ Brayton cycle power conversion system of a sodium-cooled fast reactor (SFR). The first phenomenon is plugging inside narrow sodium channels by micro cracks and the other one is damage propagation referred to as wastage combined with the corrosion/erosion effect. Experimental results of plugging shows that sodium flow immediately stopped as $CO_2$ was injected through the nozzle at $300{\sim}400^{\circ}C$ in 3 mmID sodium channels, whereas sodium flow stopped about 60 min after $CO_2$ injection in 5 mmID sodium channels. These results imply that if pressure boundary of sodium-$CO_2$ fails a narrow sodium channel would be plugged by reaction products in a short time whereas a relatively wider sodium channel would be plugged with higher concentration of reaction products. Wastage by the erosion effect of $CO_2$ (200~250 bar) hardly occurred regardless of the kinds of materials (stainless steel 316, Inconel 600, and 9Cr-1Mo steel), temperature ($400{\sim}500^{\circ}C$), or the diameter of the $CO_2$ nozzle (0.2~0.8 mm). Velocities at the $CO_2$ nozzle were specified as Mach 0.4~0.7. Our experimental results are expected to be used for determining the design parameters of PCHEs for their safeties.

• Tuberculosis and Respiratory Diseases
• /
• v.57 no.6
• /
• pp.557-566
• /
• 2004

Background : To find out effectiveness of multimodality treatments based on induction chemotherapy(CTx) in patients with clinical stage IIIA NSCLC Methods : From 1997 to 2002, 74 patients with clinical stage IIIA NSCLC underwent induction CTx at the hospital of Chungnam National University. Induction CTx included above two cycles of cisplatin-based regimens(ectoposide, gemcitabine, vinorelbine, or taxol) followed by tumor evaluation. In 30 complete resection group, additional 4500-5000cGy radiotherapy(RTx) was delivered in 15 patients with pathologic nodal metastasis. 29 out of 44 patients who were unresectable disease, refusal of operation, and incomplete resection were followed by 60-70Gy RTx in local treatment. Additional 1-3 cycle CTx were done in case of induction CTx responders in both local treatment groups. Results : Induction CTx response rate were 44.6%(complete remission 1.4% & partial response 43.2%) and there was no difference of response rate by regimens(p=0.506). After induction chemotherapy, only 33 out of resectable 55 ones(including initial resectable 37 patients) were performed by surgical treatment because of 13 refusal of surgery by themselves and 9 poor predicted reserve lung function. There were 30(40.5%) patients with complete resection, 2(2.6%) persons with incomplete resection, and 1(1.3%) person with open & closure. Response rate in 27 ones with chest RTx out of non-operation group was 4.8% CR and 11.9% PR. In complete resection group, relapse free interval was 13.6 months and 2 year recur rate was 52%. In non-complete resection(incomplete resection or non-operation) group, disease progression free interval was 11.2 months and 2 year disease progression rate was 66.7%. Median survival time of induction CTx 74 patients with IIIA NSCLC was 25.1months. When compared complete resection group with non-complete resection group, the median survival time was 31.7 and 23.4months(p=0.024) and the 2-year overall survival rate was 80% and 41%. In the complete resection group, adjuvant postoperative RTx subgroup significantly improved the 2-year local control rate(0% vs. 40%, p= 0.007) but did not significantly improve overall survival(32.2months vs. 34.9months, p=0.48). Conculusion : Induction CTx is a possible method in the multimodality treatments, especially followed by complete resection, but overall survival by any local treatment(surgical resection or RTx) was low. Additional studies should be needed to analysis data for appropriate patient selection, new chemotherapy regimens and the time when should RTx be initiated.