• 분석과학
• /
• 제16권1호
• /
• pp.25-31
• /
• 2003

Cr(III) picolinate는 생체이용성 물질로 동물이나 사람에게 필수 미네랄 크롬을 공급하는 물질로 알려져 있다. 본 연구에서는 두 가지 방법으로 Cr(III)- picolinate를 합성하고 원소분석, FT-IR, 고성능액체크로마토그래피 및 MALDI-MS 등으로 생성물 및 부산물의 순도와 구조를 확인하였다.

• 한국표면공학회지
• /
• 제52권3호
• /
• pp.111-116
• /
• 2019

Chromium was coated on a steel substrate by the Cr(III) electroplating method, and corroded at $500-900^{\circ}C$ for 5 h in $N_2/0.1%H_2S-mixed$ gas to study the high-temperature corrosion behavior of the Cr(III) coating in the highly corrosive $H_2S-environment$. The coating consisted of (C, O)-supersaturated, nodular chromium grains with microcracks. Corrosion was dominated by oxidation owing to thermodynamic stability of oxides compared to sulfides and nitrides. Corrosion initially led to formation of the thin $Cr_2O_3$ layer, below which (S, O)-dissolved, thin, porous region developed. As corrosion progressed, a $Fe_2Cr_2O_4$ layer formed below the $Cr_2O_3$ layer. The coating displayed relatively good corrosion resistance due to formation of the $Cr_2O_3$ scale and progressive sealing of microcracks.

• Journal of Microbiology and Biotechnology
• /
• 제15권4호
• /
• pp.780-786
• /
• 2005

The biomass of the brown seaweed, Ecklonia, was used to remove Cr(VI) from wastewater. Previously, Cr(VI) was removed through its reduction to Cr(III) when brought into contact with the biomass. In this study, the effects of ionic strength, background electrolytes, and Cr(III), Ni(II), Zn(II), and Fe(III) on the Cr(VI) reduction were examined. An increased ionic strength inhibited the Cr(VI) reduction. The presence of other heavy metals, such as Cr(III), Ni(II), or Zn(II), only slightly affected the Cr(VI) reduction, while Fe(III) enhanced the reduction. Although the above various parameters could affect the reduction rate of Cr(VI) by Ecklonia biomass, these effects were relatively smaller than those of pH and temperature. In addition, the previously derived rate equation was found to be applicable over a range of ionic strengths and with different background electrolytes. In conclusion, Ecklonia, bioniass may be a good candidate as a biosorbent for the removal of Cr(VI) from wastewaters containing various other impurities, and scale-up to a practical process may be accomplished using the previously derived rate equation.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제22권4호
• /
• pp.27-32
• /
• 2017

In this study, a remedial investigation using reductive stabilization was conducted to treat Cr(VI)-contaminated soil. The influences of various operational parameters, including reaction time and the mass of ferrous iron, were also evaluated. The study site was contaminated with a large amount of Cr(III) and Cr(VI), and the selected treatment method was to stabilize Cr(VI) with ferrous iron, which reduced Cr(VI) to Cr(III) and stabilized the chromium, although a greater mass of ferrous iron than the stoichiometric amount was required to stabilize the Cr(VI). However, some Cr(III) re-oxidized to Cr(VI) during the drying process, and addition of a strong reducing agent was required to maintain reducing conditions. With this reducing agent, the treated soil met the required regulatory standard, and the mass of Cr(III) re-oxidized to Cr(VI) was significantly reduced, compared to the use of only Fe(II) as a reducing agent.

• 한국잠사곤충학회지
• /
• 제26권2호
• /
• pp.26-31
• /
• 1984

In general, acid dyes been used for silk dyeing, but acid dyed silk shows weakness in color fastess, To improve this defect, the silk dyed with Acid Mordant Blue 13 was treated with chromes salts solution. Some mechanical properties and dyeing behaviors of the chrome mordant with dyed silk fabric were tested in this work. The tensile strength of silk fabric treated with chrome salts solution was decreased as the duration of treatment was increased. The mean rate constant (K) of photo-degradation was 1.019, and 1.047 after treated with Cr (III) and Cr (Ⅵ), respectively, whereas it was 1.304 in untreatment. The washing fastness of silk fabric also was improved by treatment with mordant and it was 3rd-4th grade and 4th grade when silk was treated with Cr (III) and Cr (Ⅵ), respectively, while untreatment gave 1st grade. The colour of dyed silk fabric was 2.5RP.3/10, but it was 5PB.4/3 and 5PB. 4/4 when the silk fabric was treated with Cr (III) for two hours and with Cr (Ⅵ) for one hour at 90$^{\circ}C$, respectively.

• 대한화학회지
• /
• 제30권2호
• /
• pp.231-236
• /
• 1986

수소크롬산이온에 의한 $[Mo_2O_4(C_2O_4)_2(OH_2)_2]^{2-}$의 산화는 $[Mo_2O_5(C_2O_4)_2(OH_2)_2]^{2-}$를 생성한다. 수소크롬산이온과 $[Mo_2O_4(C_2O_4)_2(OH_2)_2]^{2-}$의 반응에 대한 화학양론은 ${3Mo_2}^V+2Cr^{VI}\;{\rightleftharpoons}\;{3Mo_2}_{VI}+2Cr^{III}$와 같다. 관찰된 속도상수는 $[H+]^2$에 의존한다. $Cr^{VI}$는 Cr^V$와 $Cr^{IV}$를 거쳐서 $Cr^{III}$로 일전자씩 연속적으로 변화한다. 이들 반응에 대한 상세한 메카니즘이 제시되며 이에 대해서 논의된다.

• 대한화학회지
• /
• 제30권1호
• /
• pp.57-62
• /
• 1986

HCr$O_4^-$에 의한 $[Mo_3O_4(C_2O_4)_3(H_2O)_3]^{2-}$의 산화는 몰리브덴(IV)화합물, $[Mo_2O_5(C_2O_4)_2(H_2O)_2]^{2-}$를 생성한다. HCr$O_4^-$와 $[Mo_3O_4(C_2O_4)_3(H_2O)_3]^{2-}$의 반응에 대한 화학양론은 $2Mo_3^{IV} + 4Cr^{VI} {\to} 3Mo_2^{VI} + 4Cr^{III}$와 같다. 관찰된 속도상수는 수소이온농도에 의존한다.$Cr^{VI}$는 $Cr^V$와 $Cr^{IV}$를 거쳐서 $Cr^{III}$로 일전자씩 연속적으로 변화한다. 상세한 메카니즘이 논의된다.

• Applied Biological Chemistry
• /
• 제37권5호
• /
• pp.414-420
• /
• 1994

망간 산화물 birnessite, pyrolusite, hausmannite의 표면에서 일어나는 3가 크롬의 산화현상을 조사하였다. 이들은 zero point of charge, 표면적, 그리고 결정도 등에서 차이가 많은데, 크롬 산화현상은 모두 1차 반응이었으며 반응용액의 pH 및 최초 3가 크롬농도가 반응에 큰 영향을 미쳤다. 일반적으로 hausmannite에 의한 산화가 가장 빨랐으며 pyrolusite에 의한 산화는 상대적으로 매우 느렸다. 용액 pH와 최초 3가 크롬농도의 상호 작용이 전체 반응속도를 조절하는 것 같으며 pH가 높고 3가 크롬농도가 높을 경우 망간산화물 표면에 3가 크롬 침전되거나 complex를 형성할 수 있을 것이다. Birnessite와 hausmannite에서는 $pH\;3.0{\sim}5.0$ 범위에서 pH가 낮을수록 산화력이 높았으나 pyrolusite의 경우에는 pH가 높을수록 산화력이 증가하였다. 반응속도는 온도에 또한 민감했다. pH 3.0에서의 산화반응의 activation energies는 일반적으로 diffusion에 필요한 activation energy보다 크게 나타났으나 반응속도를 결정하는 단계가 무엇인지는 확실하지 않다.

• 자원환경지질
• /
• 제36권1호
• /
• pp.39-48
• /
• 2003

본 연구에서는 황철석과 흑운모를 이용한 회분식반응조실험(batch reactor experiment)을 통하여 수용성 Cr(Ⅵ)의 제거 및 반응속도를 살펴보았으며 이에 따른 산화환원 반응기작을 고찰하였다. 황철석 실험군이 흑운모실험 군에 비해 산화환원반응속도가 100배정도 빨랐으며, pH 3의 실험군이 pH 4 실험군에 비해 Cr(III)으로의 환원반응속도가 빠르게 나타났다. 황철석 실험군에서 Cr(Ⅵ) 초기농도치 90%이상이 제거되는데 걸리는 시간은 pH가 4일때 4시간, pH가 3일 때 40분 이내였다. 반면에, 흑운모 실험군의 경우 pH가 3인 조건에서도 Cr(Ⅵ) 초기농도의 90%이상이 제거되는데 400시간 이상이 걸렸다. 모든 조건에서 Cr(III)치 농도는 초기에 증가하는 경향을 보이다가 일정시간이 지나면 안정한 농도로 고정되었다. 산성의 반응용액에서 Cr(Ⅵ)의 환원반응속도는 이 두 광물이 포함하고 있는 2가 철의 해리속도와 관련이 있음을 의미한다. pH 4의 조건인 실험군에서는 용액 내 Cr(Ⅵ)이 Cr(III)으로 환원되고 Fe(II)가 Fe(III)로 산화된 후, (Cr, Fe)(OH)$_3$$_{ (s)}$와 같은 침전물을 생성하여 상대적으로 용액내 Cr(III)과 Fe(III)농도가 낮은 것으로 여겨진다. pH 3의 실험군을 화학양론적 고찰하였으며, 흑운모의 실험에서는 수용성 Fe(II)의 감소된 양과 Cr(Ⅵ)의 환원된 양의 이론적인 몰비가 [3Fe(II) : 1Cr(Ⅵ)]임에도 그 몰 비가 약 1:1로서 1 mole의 Cr(Ⅵ)을 환원시키는데 Fe(II)이 적게 소비되었으며, 이는 광물에서 해리되는 Fe(II)에 의한 Cr(Ⅵ)의 환원뿐만 아니라 흑운모 구조 내 Fe(II)이 용액 내 Fe(III) 이온을 Fe(II) 이온으로 환원시키는 불균질산화환원반응이 발생하고 이 반응으로 생성된 Fe(II) 이온이 다시 Cr(Ⅵ)의 환원반응에 기여하였기 때문이다. 그러나 황철석 실험의 경우, 그 몰비가 약 2.90:1 로서 3에 가까우며, 이는 황철석의 빠른 산화를 통하여 급속한 Fe(II) 이온이 공급됨으로서 Cr(Ⅵ)의 환원반응이 이론적 화학양론의 반응 몰비에 부합한 결과를 보인 것으로 판단된다.

• Membrane and Water Treatment
• /
• 제10권4호
• /
• pp.259-264
• /
• 2019

Cost effective clay adsorptive microfiltration membranes were synthesized to remove Cr (III) from high polluted water. Raw and calcined bentonite were mixed in order to decrease the shrinkage and also increase the porosity; then, 20 wt% of carbonate was added and the samples, named B (without carbonate) and B-Ca20 (with 20 wt% calcium carbonate) were uniaxially pressed and after sufficient drying, fired at $1100^{\circ}C$ for 3 hours. Then, physical and mechanical properties of the samples, their phase analyses and microstructure and also their ability for Cr(III) removal from high polluted water (including 1000 ppm Cr (III) ions) were studied. Results showed that the addition of calcium carbonate lead the porosity to increase to 33.5% while contrary to organic pore formers like starch, due to the formation of wollastonite, the mechanical strength not only didn't collapse but also improved to 36.77 MPa. Besides, sample B-Ca20, due to the presence of wollastonite and anorthite, could remove 99.97% of Cr (III) ions. Hence, a very economic and cost effective combination of membrane filtration and adsorption technology was achieved for water treatment which made microfiltration membranes act even better than nanofiltration ones without using any adsorptive nano particles.