• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.03a
• /
• pp.699-702
• /
• 2004

In this study, the affect of mounting axisymmetrical supersonic inlet to airfoil, which has 65 degree swept angle was numerically investigated. The parameter for this calculation are tree stream Mach number M=2.0 and 2.5, the distance between inlet spike and airfoil lower surface $L_{sw}$/$R_{cowl}$ = 1.21-1.54 and angle of attack to the airfoil 0-4. The mass capture ratio improved 3points in M=2.0 condition and 1points in M=2.5 while the mass capture ratio without airfoil surface was 57% and 71 % for each case. These are the result from increase of density and change of velocity deflection by the shock wave structure formed between inlet and airfoil surface. On the other hand, the distortion of Mach number at cowl lip plane increased by 13% in M=2.0, 3% in M=2.5 condition. The effects of the angle attack on the mass capture ratio is greater than that of the shock wave interaction between inlet and cowl, but the effects to the distortion is smaller in the range of this calculation condition. In the condition of M=2.0 with 4 degrees of angle of attack, inlet distortion of Mach number is mainly caused by the affects of the shock wave interaction between inlet and airfoil surface, while the largest angle of the velocity vector in the radial direction at cowl lip plane is caused by the affect of angle of attack. This large velocity vector made the flow inside the cowl subsonic and caused spillage, which interfere with the boundary layer of airfoil surface.

• Proceeding of EDISON Challenge
• /
• 2015.03a
• /
• pp.612-617
• /
• 2015

초음속 흡입구는 고속 비행에서 발생하는 충격파를 이용하여 제트엔진 내부에 유입되는 공기를 압축시키는 구조로써 주로 램제트와 스크램제트 엔진에 적용되어 연구개발이 진행되어 왔으며 현재는 미사일의 추진체 개발에도 응용되고 있다. 초음속 영역에서의 흡입구는 cone 모양의 스파이크 구조를 통해 경사충격파가 생성되어 외부에서의 공기압축을 먼저 거치게 된다. 본 연구에서는 EDISON CFD를 이용하여 외부압축 초음속 흡입구 주위의 공기유동을 해석하고 Cubbison, R.W.의 풍동실험 결과와 비교 분석하였다. 초음속 흡입구 주위의 유동을 2D 축대칭 압축성 유동으로 가정하고 EDISON CFD의 2D_Comp_P 솔버를 사용하여 수치해석을 수행하였다.

• Proceeding of EDISON Challenge
• /
• 2012.04a
• /
• pp.77-80
• /
• 2012

초음속 흡입구는 설계점에서 안정적으로 작동하지만 설계점 밖에서는 엔진성능이 급격히 감소하거나 층 격파 불안정 문제가 발생할 수 있다. 초음속 흡입구의 일반적인 특성을 파악하기 위해 2단 꺾임각을 갖는 외부 압축식 2차원 흡입구를 설계하고 EDISON_열유체 시스템을 이용하여 최종적으로 설계 마하수 2.5에서 작동하는 형상을 얻었다. 그러나 설계 마하수 이하의 영역에서는 충격파-경계층, 충격파간 상호작용으로 인해 유동에서 박리가 발생하고 최종적으로 흡입구 목을 질식시켜 아임계 상태로 천이된다. 이를 해결하기 위해 유동 제어 방법 중 하나인 bleeding을 이용하여 경계층을 제거하거나 유동의 박리를 방지하여 충격파를 cowl lip 전방에 안정하게 고정시킬 수 있었으며, 결과적으로 목적하였던 마하수 2.0에서 2.5에 이르는 작동 영역에서 강건하게 운용될 수 있는 초음속 흡입구를 설계하였다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.6 no.2
• /
• pp.65-74
• /
• 2002

Optimal supersonic diffuser shape of integrated rocket ramjet engine was derived which maximizes the total pressure recovery. Mass flux is considered as a design constraint and the second oblique shock angle of the external ramp, the cowl-lip angle and the throat area are selected as design variables. Refined response surface method through design space transformation technique was developed and employed, and high confidence level of the regression model could be obtained. Genetic algorithm was implemented for both system optimizer and subspace regression model optimization. Virtual nozzle was located at the end of throat to adjust the back pressure. With only 20 aerodynamic analyses, optimal supersonic diffuser shape which has 14% improved total pressure recovery characteristics was successfully designed.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.8
• /
• pp.29-36
• /
• 2004

Supersonic inlet buzz can be defined as unstable subcritical operation associated with fluctuating internal pressures and a shock pattern oscillating about the inlet entrance. The flow pulsations could result in flameout in the combustor or even structural damage to the engine. An experimental study was conducted to investigate the phenomenon of supersonic inlet buzz on axisymmetric, external-compression inlet. An inlet model with a cowl lip diameter of 30mm was tested at a free stream Mach number of 2.0. Subcritical instability was investigated by considering the frequency of pressure pulsation and shock wave structure at the inlet entrance. The results obtained show that total pressure recovery ratios were varied from 0.42 to 0.78, and capture area ratio from 0.34 to 0.98. The frequency of the subcritical flow increased with decrease in capture area ratios. Frequency was measured at $224{\sim}240Hz$.