• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.11
• /
• pp.1075-1086
• /
• 2008

In order to investigate the applicability and suitability of the industrial by-products to apply mono-layer cover system for non-sanitary landfill sites, 6 different industrial by-products, such as construction waste, bottom ash, gypsum, blast furnace and steel manufacture slags, and stone powder sludge, were evaluated. Various physicochemical and hydrodynamic properties of the industrial byproducts were investigated. The environmental safety was monitored using batch and long-term leaching tests as well. In addition, the flexibility of plants was observed by cultivating them in the industrial by-products. The results for physicochemical properties indicate that most of the materials considered appeared to be suitable for landfill cover. Particularly, the concentration levels of hazardous elements regulated by the Korean Law for Waste Management did not exceed the regulatory limits in all target materials. In addition, the concentrations of regulated elements for the Korean Soil Conservation Law were examined below the regulatory limits in most of materials considered, except for the stone powder sludge. The results of batch and long-term experiments showed bottom ash and construction waste were the most suitable materials for landfill cover among the industrial by-products considered. The results of plant studies indicate that the bottom ash among industrial by-products considered was most effective in developing vegetation on landfill site, showing fast germination and large growth index. At the final covering system made of mixture of soil and bottom ash, the optimum application rate of farmyard manure was observed to be 40-50 Mg/ha.

• 대한공업교육학회지
• /
• v.34 no.1
• /
• pp.44-86
• /
• 2009

The major purposes of this study were 1) to present a desirable guideline for writers who would develop the new Introduction-to-Industry textbook through the comparative analysis of 4 different kinds of current Introduction-to-Industry textbooks, 2) to help educators, who make national college entrance exam in the vocational inquiry area, make good exam items with the results of the study, and 3) to offer effective methods of teaching and learning in the field of industrial education with them. Research method used in this study was mainly literature review with the scrutinization of the literature related to the Introduction-to-Industry textbooks. Results of this study showed that all textbooks compared do mostly comply with the national writer's specific guidelines for the Introduction-to-Industry textbooks. However there were varieties for the all textbooks in a sense of deployment balance for the contents of the textbook chapters. There were also considerable differences for the deployment of supplementary materials, evaluative materials, visual materials and etc. according to the characteristics of each textbook. The degree of the connectivity between the textbooks and the national college entrance exam in the area of the vocational inquiry was similar for the each textbook. However, it was not good enough for the students to study one textbook for the preparation of the exam in the vocational inquiry area because the problems in the exam were set in the range of covering the all different kinds of textbooks by the examiners.

• Journal of Bio-Environment Control
• /
• v.14 no.2
• /
• pp.95-105
• /
• 2005

This study was carried out to file up using effect and requirement of energy for environmental design data of Pleurotus eryngii growing houses. Heating and cooling Degree-Hour (D-H) were calculated and compared for. some Pleurotus eryngii growing houses of sandwich-panel (permanent) o. arch-roofed(simple) type structures modified and suggested through field survey and analysis. Also thermal resistance (R-value) was calculated for the heat insulating and covering materials of the permanent and simple-type, which were made of polyurethane or polystyrene panel and $7\~8$ layers heat conservation cover wall. The variations of heating and cooling D-H simulated for Jinju area was nearly linearly proportional to the setting inside temperatures. The variations of cooling D-H was much more sensitive than those of heating D-H. Therefore, it was expected that the variations of required energy in accordance with setting temperature or actual temperature maintained inside of the cultivation house could be estimated and also the estimated results of heating and cooling D-H could be effectively used far the verification of environmental simulation as well as for the calculation of required energy amounts. When the cultivation floor areas are all equal, panel type houses to be constructed by various combinations of materials were found to by far more effective than simple type pipe house in the aspect of energy conservation maintenance except some additional cost invested initially. And also the energy effectiveness of multi-span house compared to single span together with the prediction of energy requirement depending on the level insulated for the wall and roof area could be estimated. Additionally, structural as well as environmental optimizations are expected to be possible by calculating periodical and/or seasonal energy requirements for those various combinations of insulation level and different climate conditions, etc.

• The Journal of Korean Society for Radiation Therapy
• /
• v.20 no.1
• /
• pp.37-43
• /
• 2008

Purpose: To evaluate dosimetry results of three different techniques for whole breast irradiation after conservative surgery of large pendulous breast patient. Materials and Methods: Planning computed tomography (CT) scans for three techniques were performed on a GE Hi-speed advantage CT scanner in the supine (SP), supine with breast supporting Device (SD) and prone position on a custom prone mattress (PP). Computed tomography images were acquired at 5 mm thickness. The clinical target volumes (CTV), ipsilateral lung and heart were delineated to evaluate the dose statistic, and all techniques were planned with the tangential photon beams (Pinnacle$^3$, Philips Medical System, USA). The prescribed dose was 50 Gy delivered in 25 fractions. To evaluate the dose coverage for CTV, we analysed percent volume of CTV receiving minimum of 95%, 100%, 105%, and 110% of prescription dose ($V_{95}$, $V_{100}$, $V_{105}$, and $V_{110}$) and minimal dose covering 95% ($D_{95}$) of CTV. The dosimetric comparison for heart and ipsilateral lung was analysed using the minimal dose covering 5% of each organs ($D_5$) and the volume that received >18 Gy for the heart and >20 Gy for the ipsilateral lung. Results: Target volume coverage ($V_{95}$ and $V_{100}$) was not significantly different for all technique. The V105 was lower for PP (1.2% vs. 4.4% for SP, 11.1% for SD). Minimal dose covering 95% ($D_{95}$) of target was 47.5 Gy, 47.7 Gy and 48 Gy for SP, SD and PP. The volume of ipsilateral lung received >20 Gy was 21.7%, 11.6% and 4.9% for SP, SD and PP. The volume of heart received >18 Gy was 17.0%, 16.1% and 9.8% for SP, SD and PP. Conclusion: Prone positioning of patient for large pendulous breast irradiation enables improving dose uniformity with minimal heart and lung doses.

• Asian Journal of Turfgrass Science
• /
• v.18 no.3
• /
• pp.129-139
• /
• 2004

This study conducted to find out the best way to prolong green period of Zoysiagrass and Cool-season grass from 1999 to 2001 in Korea. Treatments were control, vinyl, black shade net, green shade net, black shade net+vinyl, green shade net+vinyl, vinyl+black shade net, and vinyl+green shade net for Zoysiagrass. For cool-season grass, treatments were control, non-punched vinyl and punched vinyl. Data on temperature, light intensity, humidity, leaf color and chlorophyll were collected. Plot size was 2 by 2 and the experiment was conducted using completely randomized design with three replication. Zoysiagrass Green period of Zoysiagrass depended on temperature and light intensity than humidity. Effective method of prolongation of green period in Zoysiagrass was to covered it with vinyl during early October to early November, and then using vinyl+black shade net from end of November. Cool-season grass Effective method of prolongation of green period in Cool-season grass was by covering it with vinyl during mid-November to mid-December, and then using vinyl+black shade net from end of December.

• Journal of Korea Foresty Energy
• /
• v.17 no.1
• /
• pp.47-55
• /
• 1998

In the search for broadband damping composites, it is desirable to have polymers with a broad and high loss region, covering the entire temperature and frequency range of interest. Interpenetrating polymer networks, IPN's, are materials composed of two or more crosslinked polymers intimately and irrevocably interwinded. The resulting distribution of microenviron-ments can result in a materials with a high mechanical loss broad end over that of either polymer component alone. In this study, several series of copolymer, crosslinked copolymer and copolymer/copolymer IPN's were synthesized for possible use as broadband damping materials. Then their dynamic tensile properties were measured and compared with the damping properties of sandwich composites. Dynamic mechanical analysis showed that the temperature of loss peak may be varied over a wide temperature range with formulation. The compatibility of IPN`s was depended on the compatibility of A and B polymers as well as crosslink density. The damping factor(tan ${\delta}_c$) of composites became greater when a polymer of approximate storage module(E`) range of 5X10$^7$ to 10$^9$ dyne/cm$^2$ and large tan ${\delta}$ at the same time was used. The damping properities of poly (2-EHA80-co-St20)/poly(2-EHA20-co-St80) IPN`s crosslinked with 3%-DEGDM were relatively better over a broad temperature range.

• Current Industrial and Technological Trends in Aerospace
• /
• v.6 no.1
• /
• pp.90-98
• /
• 2008

Nanotechnology(NT) refers to a field of advanced micro-technology covering the creation and manufacturing of materials on the atomic and molecular scale and requires interdisciplinary study with various fields including materials science, physics, chemistry, electronics and others. Whileas nanotechnology is a kind of micro and small scaled science, space technology(ST) is one of the larger and system technologies utilizing broad fields of mechanical, materials, electronics and communication technologies. It is necessary to select and concentrate the functional items of nanotechnology for efficient application to be utilized in space technology, due to the cross-sectional characteristics of nanotechnology within nanomaterials, nanoelectronics, and nanomanufacturing. This paper provides the current state of art of nanotechnology in space technology by evaluating NASA's activities and the 9th frame of the project ANTARES(Analysis of Nanotechnology Applications in Space Developments and Systems) with the support of the German Aerospace Center (DLR), Space Flight Management, Division Technology for Space Systems and Robotics. It has shown that it is necessary to apply nanotechnology to space technology in order to achieve international competitiveness, for the nanotechnology can bring the previously impossible things to reality. Since KARI plans to send an unmanned probe to the moon's orbit and land a probe on the moon's surface in 2025, it is urgently needed to incorporate nanotechnology to national space development plan.

• Analytical Science and Technology
• /
• v.23 no.2
• /
• pp.138-146
• /
• 2010

The Korean Ministry of the Environment revised a few sections of the regulations in the Law of indoor air quality management for the reinforcement or adjustment of the regulation criteria standard for releasing pollutants from building materials. Especially, in case of sealant, the contents covering liquid building materials, excess standards and testing methods have been added simultaneously in this revision, As a result it is impossible to compare original standards with revised standards directly. For this reason, this study reviewed revised test method of sealant pollutant emission rates in terms of impact and validity in comparison with the original test method. Through this study, the basic properties of revised pollutant emission control standards was assessed. Especially in sealant, since each product has a wide deviation of time required for complete drying, it is proved that there are a large number of products that are not hardened completely in test time. The result of our experiments on the revised test methods showed that this revised test methods yield emission rates that are two and half times less than those of the original testing method. To apply the revised test method of sealant to all the sealant products, It is necessary to extend the test period or improve specimen to fit the test method for quickly drying sealant products.

• Journal of the Korean Society of Food Culture
• /
• v.3 no.2
• /
• pp.125-133
• /
• 1988

In recent years, Korean traditional culture has been reviewed in many ways. And Great efforts have been made to form a culture suitable for the Koreans. With these tendencies, the interest in Korean traditional foods has been greater. So this paper is intended to identify and analyze the kinds, materials and cooking processes of the rice cakes needed for ancestral worship rites in the court of Choson Dynasty. The work is centered around the Tae-sang-ji written by Lee kun-myong in 1873-the 10th year since king kojong's coming to the throne. And we study such literatures on foods and cooking processes as Kyugon-si-ui-bang, Yo-rok, Jungbo-Sallim-Kyungjae, Kyuhap-Chongso, Si-ui-jon-so and so on. The results are compared and analyzed. Cooking processes and materials of Korean rice cakes in Choson Dynasty were various and had traditional characteristics. Rice cakes necessarily needed for various rites were called pyun especially when they were used for ancestral worship. And many different kinds of Pyun were used according to seasons. There were nineteen kinds of rice cakes used for ancestral worship in the court: Gu-i-Byung, Bun-ja-Byung, Baek-Byung and so on. The six; Gu-i-Byung, Bun-ja-Byung, Sam-sik-Byung, Yi-sik-Byung, Baek-Byung and Huk Byung were essential for the great rites at Jong-myo and Young-nyung-Jeon and so they were highly thought of. Main materials of these six were rice, glutinousrice, sorghum and wheat flour. Cooking processes of the rice cakes above mentioned can be classified into frying, beating, boiling, steaming, etc. Powder for covering rice cakes was made of bean, pine nut, sesame and red bean, of which bean was made the greatest use of. If was very wise of them to use these kinds of powder, for they supply protein and lipid of which rice cakes are destitute and they also add colors and good tastes to rice cakes. But Korean traditional rice cakes are less used as the thought of rites has changed and various kinds of desserts have been developed. And yet there is no denying the fact that even now rice cakes play a great role in traditional formalities.

• (The)Study of the Eastern Classic
• /
• no.59
• /
• pp.57-92
• /
• 2015

This study looked into the process by which Haseo(河西) Kim In-hoo(金麟厚:1510~1560), a neo-confucian scholar of mid Joseon Dynasty, was recognized and adored as an inheritor of traditional academic genealogy of neo-confucianism of Joseon Dynasty. I intended to examine the process of personal embodiment affected or excluded in certain manners by various materials covering the lifetime of bygone persons based on the process of such embodiment. The part related to childhood of Haseo was arranged newly to highlight solid relationship between Kim In-hoo and King Injong(仁宗). That was because Kim In-hoo raised the issue of loyalty and fidelity, one of the most important and most contentious issues at that time, in connection with reinstatement of GimyoSarim(己卯士林, progressive political faction with young officials), and King Injong was the king who reinstated Gimyo Sarim. That played a decisive role in establishing the image of Haseo, a classical scholar with unwavering integrity and loyalty. During the Late Joseon Dynasty, canonization of Haseo was made under the leadership of King Jeongjo(正祖) and Seoin(西人) in royal court. In the 17th century, Seoin scholars revised the materials related to lifetime of Kim In-hoo in various way and proofread and published the collection of literary works by Kim In-hoo. That aimed to establish scholastic system associated with Seoin and legitimacy of study as pursued by Seoin. This made progress with adoration towards scholars affiliated with Seoin, including Yulgok(栗谷) Lee Yi(李珥). Finally, King Jeongjo showed strong intention to take the lead as sovereign in the process while Haseo was canonized into national academy in the 18th century. That came from the desire to solidify his status as a teacher who took pride in taking responsibility for the dynasty's authentic study, as well as the king heading the dynasty politically.