• Journal of Korean Society on Water Environment
• /
• v.38 no.2
• /
• pp.82-94
• /
• 2022

In this study, chemically modified biochar (NSBP500, KSBP500, OSBP500) derived from starfish was utilized to improve the adsorption ability of the SBP500 (Starfish Biochar Pyrolyzed at 500℃) in a solution contaminated with heavy metals. According to the biochar modification performance evaluation batch tests, the removal rate and adsorption amount of NSBP500 increased 1.4 times for Cu, 1.5 times for Cd, and 1.2 times for Zn as compared to the control sample SBP500. In addition, the removal rate and adsorption amount of KSBP500 increased 2 times for Cu, 1.8 times for Cd, and 1.2 times for Zn. The removal rate and adsorption amount of OSBP500 increased 5.8 times for Cu. The FT-IR analysis confirmed the changes in the generation and movement of new functional groups after adsorption. SEM analysis confirmed Cu in KSBP500 was in the form of Cu(OH)₂ and resembled the structure of nanowires. The Cd in KSBP500 was densely covered in cubic form of Cd(OH)₂. Lead(Pb) was in the form of Pb₃(OH)₂(CO₃)₂ in a hexagonal atomic layer structure in NSBP500. In addition, it was observed that Zn was randomly covered with Zn₅(CO₃)₂(OH)₆ pieces which resembled plates in KSBP500. Therefore, this study confirmed that biochar removal efficiency was improved through a chemical modification treatment. Accordingly, adsorption and precipitation were found to be the complex mechanisms behind the improved removal efficiency in the biochar. This was accomplished by electrostatic interactions between the biochar and heavy metals and ion exchange with Ca²⁺.

• Computers and Concrete
• /
• v.31 no.4
• /
• pp.293-306
• /
• 2023

This study proposes and demonstrates a smart monitoring system that uses transmission lines embedded in a reinforced concrete structure to detect the presence of defects through changes in the electromagnetic waves generated and measured by a time-domain reflectometer. Laboratory experiments were first conducted to identify the presence of voids in steel-concrete composite columns. The results indicated that voids in the concrete caused a positive signal reflection, and the amplitude of this signal decreased as the water content of the soil in the void increased. Multiple voids resulted in a decrease in the amplitude of the signal reflected at each void, effectively identifying their presence despite amplitude reduction. Furthermore, the electromagnetic wave velocity increased when voids were present, decreased as the water content of the soil in the voids increased, and increased with the water-cement ratio and curing time. Field experiments were then conducted using bored piles with on-center (sound) and off-center (defective) steel-reinforcement cage alignments. The results indicated that the signal amplitude in the defective pile section, where the off-center cage was poorly covered with concrete, was greater than that in the pile sections where the cage was completely covered with concrete. The crosshole sonic logging results for the same defective bored pile failed to identify an off-center cage alignment defect. Therefore, this study demonstrates that electromagnetic waves can be a useful tool for monitoring the health and integrity of reinforced concrete structures.

• The Journal of Korean Medicine
• /
• v.44 no.3
• /
• pp.189-200
• /
• 2023

Objectives: The purpose of this study is to analyze the current state of quantitative literature evidence for the prescription of 56 herbal medicines covered by health insurance that have been studied in Korea for the past 30 years, to evaluate the reliability of the evidence, and to find out the research direction of herbal medicine prescription in the future. Methods: 56 kinds of herbal medicine prescriptions were searched in domestic literature search databases OASIS, DBpia, and overseas PubMed, classified into chemistry, toxicity, cells, animals, clinical cases, and clinical trial studies, and built into an EBM pyramid structure. Results: When classified according to research contents, there were 61 cases (7.5%) of physicochemical analysis to identify constituent substances, 80 cases (9.8%) of toxicity evaluation, and 672 cases (82.7%) of efficacy evaluation. The efficacy evidence was classified according to the evidence-based medical pyramid structure: 196 cell trials (29.1%), 372 animal trials (55.4%), 89 case and case reporting series (13.3%), 7 comparative case studies (1.1%), and 8 randomized control clinical trials (1.2%). In the pyramid composition, the basis for the validity of 56 kinds of herbal medicines prescribed was 568 cases (84.5%) in cell and animal units, which could not be said to be highly reliable. There was no relationship between the ranking of quantitative literature evidence for herbal medicine prescriptions and the ranking of salary administration. Conclusions: In an era that continues to require scientific evidence for herbal medicine, traditional herbal medicine should secure the basis for safety validity even for the 10th most frequent prescription among 56 herbal medicine prescriptions for consumers. In particular, traditional herbal medicine should increase the quantitative and qualitative level of case reports on related herbal medicine prescriptions, focusing on each clinical society, and move toward comparative case studies and randomized clinical trial so that traditional herbal medicine is positioned as Evidence-based medicine.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.1
• /
• pp.43-49
• /
• 2020

In this study, the stability of the low crested structure armoured by Tripod block has been investigated using two-dimensional hydraulic model tests. The effect of wave steepness and freeboard on the rock stability on crest, front, and the rear slope has been investigated. From the experimental data, the new empirical formula for the stability coefficients of the Tripod block was proposed. But Tripod is not proper to use the armour block of the low crested structure because the uplift force of this block is greater than that of Tetrapod and rock.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.11 no.2
• /
• pp.55-65
• /
• 2008

This study was surveyed to analyze vegetation structure of mountainous wetlands in Chung-ju city and around area from September to November, 2006. 6 sites of total 15 potential mountainous wetlands were discriminated throughout field survey. By classification system of mountainous wetlands presented in manual of forest wetlands research, types of wetlands were classified into slant and a flat. Many sites were covered with land plants as Pueraria thunbergiana and so on. To understand vegetation structure of mountainous wetlands, Height, DBH (diameter at breast height), DI (Dominance Index), Sociability and Constancy were surveyed and Based on this result, a projection chart was drawn. As results, Salix koreensis in tree layer and Persicaria thunbergii and Impatiens textori in herb layer were surveyed as broadly distributed species. This study is mainly focused on vegetation condition of mountainous wetlands. But, it will be needed studying on classification system of mountainous wetland type and functional assessment for conservation or management of wetlands.

• Computers and Concrete
• /
• v.20 no.6
• /
• pp.671-682
• /
• 2017

In this research, seismic response of pipes is examined by applying nanotechnology and piezoelectric materials. For this purpose, a pipe is considered which is reinforced by carbon nanotubes (CNTs) and covered with a piezoelectric layer. The structure is subjected to the dynamic loads caused by earthquake and the governing equations of the system are derived using mathematical model via cylindrical shell element and Mindlin theory. Navier-Stokes equation is employed to calculate the force due to the fluid in the pipe. Mori-Tanaka approach is used to estimate the equivalent material properties of the nanocomposite and to consider the effect of the CNTs agglomeration on the scismic response of the structure. Moreover, the dynamic displacement of the structure is extracted using harmonic differential quadrature method (HDQM) and Newmark method. The main goal of this research is the analysis of the seismic response using piezoelectric layer and nanotechnology. The results indicate that reinforcing the pipeline by CNTs leads to a reduction in the displacement of the structure during an earthquake. Also the negative voltage applied to the piezoelectric layer reduces the dynamic displacement.

• Journal of the Korean Institute of Rural Architecture
• /
• v.21 no.3
• /
• pp.41-48
• /
• 2019

The purpose of this study is to understand whether the architecture of the mountain village conforms to the geography and local landscape, and become a unique scenic element. Also, the study is to grasp the status of the village landscape design elements. The methods and contents of the study were surveyed by field research with references in Biederbach community, an isolated mountain village in Southwestern Germany. The time frame for the survey research is July 2015. The contents of the study include the analysis of the village's landscape structure, architecture, and landscape design patterns. The following conclusions were reached through the above research process. First, the village landscape structure seen in the mid-distance view is the hilly scene of the alpine region, which houses the sloping terrain of Black Forest and surrounds the residential area with the grassland covered by the Black Forest. Second, the main elements of the town's landscape building are historical culture, traditional architecture, topology and nature, and artificial environmental design. Third, the landscape design utilizing the village's resources creates a sustainable community's residential environment.

• Proceedings of the Korean Fiber Society Conference
• /
• 2002.04a
• /
• pp.269-272
• /
• 2002

The technical development of nonwoven industries for past 30 years with economic growth has contributed to create new end-use covered the wide field of industries. Recently, new concept of textile technology has studied and developed for cost reduction of production and high added value of products. Whereas the structure of nonwovens produced by conventional production methods have various pore size, and it is not suitable to filtrate gas and small powder particles. (omitted)

• Publications of The Korean Astronomical Society
• /
• v.32 no.1
• /
• pp.147-149
• /
• 2017

Since the launch of the Herschel Space Observatory, our understanding about the photo-dissociation regions (PDR) has taken a step forward. In the bandwidth of the Fourier Transform Spectrometer (FTS) of the Spectral and Photometric Imaging REceiver (SPIRE) on board Herschel, ten CO rotational transitions, including J = 4 - 3 to J = 13 - 12, and three fine structure lines, including [$C{\small{I}}$] 609, [$C{\small{I}}$] 370, and [$N{\small{II}}$] $205{\mu}m$, are covered. I present our findings from the FTS observations at the nuclear region of M83, based on the spatially resolved physical parameters derived from the CO spectral line energy distribution (SLED) map and the comparisons with the dust properties and star-formation tracers. This article discusses (1) the potential of using [$N{\small{II}$] 205 and [$C{\small{I}}$] $370{\mu}m$ as star-formation tracers; (2) the excitation mechanisms of warm CO in the nuclear region of M83.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2006.05a
• /
• pp.65-66
• /
• 2006

The motor show is the most popular show in domestic exhibitions. It provides many interesting events and exhibition programs from small parts of the car to luxury sedans. It should be spatially designed for not only display programs but also various other programs such as concerts or events. And it needs to approach strategic and complex plans for unique stand design because of a great number of visitors' safety and accomodation, and competition with other companies. S motor is the company of middle standing, producing the most luxurious sedans and SUVs. I had to find a display and space composition way to harmonize with luxurious sedans and outdoor vehicles in a booth. The booth had to be distinctive and unique inspite of relatively small and handicaped area compared with other companies' booths. So I designed two major plans; ceiling structure covered whole booth space and office space for staff. These plans could get completely majesty and unique design for booth, events and other programs. And the structure of booth was minimalized for visitors' safety and accomodation in great event time.